Question about GE Ovens

1 Answer

Where can I get a replacement temperature control for GE model 169152

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 3,154 Answers

I am unsure whether you are asking for the control itself or the knob or ?
If you google for GE 169152 control part you will get some results, including some manuals. Once you find the part number of the part you are looking for, you can either look for that part online, or you should be able to find a local appliance part supply store/warehouse to get it from. I got a GE genuine temperatire control for my GE range last week from ReliableParts locally.

Posted on Oct 24, 2019

Ad

1 Suggested Answer

Greg McCarthy

  • 1340 Answers

SOURCE: My GE old electric oven

It is most likely the thermocouple within the oven.It is usually mounted on the back,up towards the top,with 2 leads coming from it.Your oven is pretty old so it may or may not be found.Hopefully GE kept this same part in many units after yours was made.The thermocouple reads what the temperature is,compares it to what you want,and tells the oven what to do.There are 2 sections to it.If one goes bad,it easily would cause your problem and is a very common oven failure problem.If you do find it and replace it yourself,either unplug the oven or turn off the circuit breaker first.
Good luck,Greg

Posted on Nov 04, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge profile f2 error while broiling in upper oven


F2
During

BAKE Control senses oven
temperature above 615F-630F If actual over temperature condition occurred: Look for
welded relay contacts on bake or broil relays. If this happens, replace oven
control (also called clock or ERC).

If no over temperature condition
occurred
: Look for a high resistance connection or any other cause of high
resistance in the oven temperature sensor circuit. Check sensor, sensor harness
and sensor harness connection at sensor and oven control. Replace sensor if
found defective.

Remember: Oven control (ERC) measures resistance
of sensor circuit , not actual oven temperature. F2
During
CLEAN Control senses oven temperature above
915F-930F If actual over temperature condition
occurred
: Look for welded relay contacts. If this happens, replace oven
control (also called clock or ERC).

If no over temperature condition
occurred
: Look for a high resistance connection or any other cause of high
resistance in the oven temperature sensor circuit. Check sensor, sensor harness
and sensor harness connection at sensor and oven control. Replace sensor if
found defective. Check door lock switches.

Remember: Oven control
(ERC) measures resistance of sensor circuit , not actual oven
temperature.

Jan 24, 2011 | GE Profile JTP56 Electric Double Oven

1 Answer

My ge oven model # J RSO4BOW3 is showing a error code F3 and F5


F3
or
F4 Open or shorted oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. F5 Loss of relay drive circuit If this fault code cannot be cancelled, replace the oven control (also called clock or ERC).

Oct 30, 2010 | GE JRS04 Electric Single Oven

1 Answer

My ge oven flashes F2 and stops heating first it started at 400 now its at 325


HI. This will occur if the Control senses oven temperature above 615F-630F

If actual over temperature condition occurred: Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).

If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.

Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature.

Sep 19, 2009 | GE Ovens

1 Answer

Flashing F2 warning


GE
Range/Stove/Oven Fault Codes Failure
Code
Condition Check/Repair F0 and F1 Failed Thermistor Control Replace Electronic Range Control (ERC) F2 Oven temp exceeds 590 w/ unlocked door High resistance or interference in oven temperature sensor. Replace oven temperature sensor F3 Open oven temperature sensor circuit Replace oven temperature sensor F4 Shorted wire (Oven temperature sensor) Locate and correct F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC) F8 Component Failure Replace Electronic Range Control (ERC) F9 Program w/ door circuit Check wiring

Aug 18, 2009 | Ovens

1 Answer

I have a GE model JKP13 and it keeps going off, beeping and flashing f2 or f3


HI, the oven has experienced a very high temp due to a failed sensor. Check sensor harness and harness connection between oven sensor and oven control. Replace the oven temperature sensor (RTD) if wiring is ok.

Next. Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Look for welded relay contacts as well on the control and sensor. replace, both the control and temp sensor if weld spots are visible.

Aug 04, 2009 | GE JTP45 Electric Double Oven

1 Answer

Older GE oven self clean mode beeping with F2???


HI, this will happen when the oven Control senses oven temperatures above 915F-930F

If actual over temperature condition occurred: Look for welded relay contacts. If this happens, replace oven control (also called clock or ERC).

If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective. Check door lock switches.

Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature.

Jul 24, 2009 | GE Profile JTP56 Electric Double Oven

1 Answer

Getting a f2 code on GE oven model JKP13


Control senses oven temperature above 615F-630F (F-2)

If actual oven temperature condition occurred: Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).

If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.

Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature.

Jun 13, 2009 | GE Profile JTP18 Electric Single Oven

1 Answer

Temperature is wrong


Many ranges show a beginning temperature that is higher than actual temperature, then the gap closes as it heats up.
Use a accurate oven thermometer to check your temps.
If it is faulty, it will not recalibrate to offset 200 degrees. You will have to replace the ERC.

Mar 20, 2009 | GE 24" Built-In Single Gas Wall Oven

1 Answer

GE Model #JBP76GS1WW Oven Control Knob


First contact GE directly, they will send you replacements for half that price and you can do the labor yourself. 1-877-959-8688

Feb 01, 2009 | GE Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...