Question about Maytag Refrigerators

Open Question

Maytag refrigerator modelmfi2269vew1, how do I program a new main circuit board?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 148 Answers

SOURCE: refrigerator honeywell model number 88031 melted circuit board! Where to get parts?

any refrigeration supply company could order that part for you just give him model and serial numbers of the refrigerator and number on the board and they can help you

Posted on May 13, 2009

Ad

Philip

  • 949 Answers

SOURCE: burn marks on circuit board

This can happen over time, the connection points get a little resistance build up and discolor from the heat. This resistance comes from the moisture, steam and spills. The protective devices on the board and machine are designed to fail safe.

I would suggest replacing the board after inspecting the wiring harness from the board down through the door and to the motor.

Posted on Apr 25, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: mzd2766ge Maytag refrigerator not cooling but

Hi, Most sites have an exploded view that shows where it is located...
That is not that hard to fix and you can easily buy the parts yourselfonline...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

heatman101

Posted on Sep 20, 2010

Cohen Dusauzay

  • 2 Answers

SOURCE: where is the main circuit board located on a

it is located in the rear of the fridge behind a metal panel.

Posted on Nov 02, 2011

novaco

novaco

  • 2 Answers

SOURCE: replaced circuit board, refrigerator wont allow programming, just says PE0 000

Dear joe, I had the same problem when my refrigerator was broken. You need to re-program the control panel as follows: 1. First you need the Program Code for your fridge. It is on the plate on the inside of your fridge, on the same plate that has your Model # and Serial # on it. 2. Programming is done with the refrigerator doors open. 3. Press and hold the Door Alarm keypad on the control panel. 4. Then press and hold the Freezer Temperature Down keypad. 5. Then release the Door Alarm keypad and wait 3 seconds. 6. The control pad will then display PE to indicate it's in programming mode. 7. Entry is confirmed by pressing the Freezer Temperature down keypad once more. 8. The control panel will display the current program code. It should be the same one that I asked you to find in Step 1. 9. If the program code is the correct one, exit the programming mode by closing the refrigerator doors. 10. If the program code is not the correct one for your refrigerator, press the Refrigerator Temperature Up or Down to change the value with each keypress. 11. The decimal point indicates the selected digit. Press the Freezer Temperature Up or Down to select the next digit. 12. Once the desired program code is displayed, press and hold the Freezer Temperature down keypad until the program code begins flashing, indicating that it's been saved. 13. Again, when you're done, exiting the program mode is done by closing the refrigerator doors. Hope this helps alot of people out there. I'm not sure what the problem is at Maytag, but they're extremely slow in getting parts shipped for their units. The local Maytag repair people have indicated to me that they are seeing an overwhelming number of Maytag refrigerators needing repairs that are around the one year age range. They say the quality of the new units is terrible.

Posted on Jun 29, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power surge brand new maytag fridge not cooling


That power surge probably burnt out the guse on the circuit board. I suspect you may need a new board unless you know an electricity geek who can replace the fuse. New I would check your warranty. That circuit board might cost $200. plus..

Dec 21, 2014 | Maytag MSD2756G Side by Side Refrigerator

1 Answer

Replaced bad circuit board and now we cant program


There is always the cance of a lemon when buying elecrtonics but there should have been instructions that came with the new board that will instruct on the set up of the new board. If not I would give the manufacturer a call and they usually have a tech line that may be able to talk you through it. Good luck

Sep 08, 2012 | Maytag MFI2569VE Bottom Freezer French...

1 Answer

Temp control is flashing and clicking


you will have to have the jazz board replaced . very common problem . i have one in my own home . . this is the main control. and the only correction . A Maytag problem .. new boards have been revised and do not have the problem .. **** ,. have been doing maytag since 1950 's // hope this hepl.s if your do this service your self ( read the instructions good . as when your finish you wll have to program the control for your model .. **** . .its a easy job but you have to finish it properly.. mm

Jan 06, 2010 | Maytag MFD2560HES Bottom Freezer French...

1 Answer

Maytag wide by side MZD2667HEW freezer works fridge does'nt


Was it the damper control you replaced and it's still not adjusting the vent(damper)? And is the cold air from the freezer being blown through the vent by the fan in the freezer.
The circuit board mainly controls the defrost timing and the fans. I don't know that it would solve your problem.

Sep 21, 2009 | Maytag MZD2667HE Side by Side Refrigerator

1 Answer

Malfunctioning Maytag and memory board flashing


You need a main control board and it will have to be programed but the new board comes with instructions

Mar 27, 2009 | Maytag MFI2568AES Stainless Steel Bottom...

1 Answer

Frozen code


did you change circuit board ???? youll need to reprogram the refig, there should be a paper that came with the new part( if indeed youdid cahngeit) if not there should be underthe right front corner of refig tapedup under behind the toe grill a tech sheet in which they should explain "programming your refrig"

Jan 26, 2009 | Maytag MFI2568AES Stainless Steel Bottom...

1 Answer

Defrost Problem


the first thing to check is the defrost heating element, then the defrost limit switch, if good, then its probably the main circuit board.

Sep 12, 2008 | Maytag MZD2766GES Side by Side...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Refrigerators Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Carlos Alvarez

Level 1 Expert

16 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Maytag Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...