Question about Bose Audio Players & Recorders

Open Question

What is the wiring diagram on cvs-10 bose center speaker

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: '05 Chevy Z-71 w/ BOSE stereo upgrade. How can I wire the BA-200 ?

Unfortunately, it's not as simple as a crossover. Bose gets its name from making complete systems - meaning - Bose speakers work right because the amplifier is custom built for those speakers, and the deck is custom built for the amplifier- all Bose from beginning to end. The only way to bypass any part of a Bose system is to bypass the whole system, including amp, deck, subs, speakers, eq's, and start over from scratch, unless you are an electrical engineer and can meter components and evaluate them. Bose often has 1 or 1/2 ohm speakers which will not work with after market systems.  If you go to a Bose store, the only system that sounds good is the lifestyle system because it is Bose from beginning to end, just as an example. They are either cheaters or geniuses

Posted on Oct 17, 2007

Ad

Anonymous

  • 78 Answers

SOURCE: 2005 chevy silverado stereo wiring diagram

Are you trying to install a new stereo? If so will need to re-wire all your speakers because of the bose system.

And if im not mistaken your year truck might need a really expensive harness to install the radio. Here is a link to it.

http://www.crutchfield.com/p_120GMOS04/GM-Factory-Integration-Adapter.html?tp=3486

You should look into this too! http://www.crutchfield.com/p_120GMOS04/GM-Factory-Integration-Adapter.html?

Posted on May 22, 2009

Suraido

Gilbert Labont?

  • 195 Answers

SOURCE: Please Help ....i have Bose Acoustimass 10, 5.1 system connected

Usually the LFE out is only a line out and is not amplified in any way, so first of all is your subwoofer self amplified or not? Cause if not, the LFE output won't be of much use to you. So if it's not self amplified you need an new amplifier to put between the receiver and the subwoofer. Any amp that supports RCA line-in input will do. Even a car stereo amplifier will work provided you can get a 12volt power supply to run it in the house. If the subwoofer is self amplified though, then all you need is to make an adapter cause none are readily available in stores to go from a RCA connector to 2 wires. You can buy a virgin RCA connector that you can wire yourself at The Source, Circuit City, or any electronics store you have locally, or if you have an old RCA to RCA wire you don't need anymore, you can just cut it in half, strip the 2 wires and you got you adapter right there.

Posted on Jul 07, 2009

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: do I need special speaker wires to hook up bose

It comes with special connectors - not necessarily special wire.

You will need the Lifestyle Cables.

c35cb24.jpg Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 01, 2009

dunnbiker

David Dunn

  • 8546 Answers

SOURCE: front bose speakers and bass module stopped puttimg put sound

If you're saying you hooked the Bose speakers directly to the Yamaha's amp instead of the prescribed way through their own bass module - they're cooked.

Posted on Dec 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sansui hdlcdvd26s


see the diagram attached, you can have wrong connection. However clean the contacts and test the wires.God bless you
he speakers are not connected properly. Check the speaker connections. The sound level on the rear or center speakers is turned down. Adjust the sound levels. The receiver is not in the proper surround mode. Set the receiver to a surround mode. The speaker settings are incorrect. Check the settings as per the user's manual.41a9b9c6-64e2-4745-adf3-95fdac1fe686.jpgba7a1620-dfc0-4e45-8fea-6237135735f9.jpeg

Jul 26, 2013 | Televison & Video

1 Answer

Wiring diagram for bose 28060


Infiniti QX56 Car Radio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Yellow
Car Radio Accessory Switched 12v+ Wire: Purple
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: Red/Blue
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger Wire: Green/White
Car Stereo Amp Trigger Wire: Green/White
Car Stereo Amplifier Location: To the right of the steering column behind the BCM.
Left Front Speaker Positive Wire (+): Blue/White
Left Front Speaker Negative Wire (-): Blue/Red
Right Front Speaker Positive Wire (+): White/Black
Right Front Speaker Negative Wire (-): Blue/Black
Left Rear Speaker Positive Wire (+): Gray
Left Rear Speaker Negative Wire (-): Black/Yellow
Right Rear Speaker Positive Wire (+): Orange/Blue
Right Rear Speaker Negative Wire (-): Red/Blue

Jul 08, 2012 | Cars & Trucks

1 Answer

@I got a bose acoustmass 7 it has three inputs left right center,and three outputs left right center dont have paper work I need like a diagram or instructions on hooking it up please help.


you need to run the left speaker output from the amp to the left speaker input on the Bose, the right speaker output on the amp to the right speaker input on the Bose, the center channel output on the amp(assuming it has one), to the center channel input on the Bose...then the right output on the Bose , to the right Speaker..the Left output on the Bose to the left speaker...and finally the center channel output on the Bose to the center speaker

Jan 07, 2011 | Bose Acoustimass 5 III System

1 Answer

I accidently pulled the wires from our bose VS-10 center speaker and now when I reconnect, it doesn't work. Why?


Since there are only the two conductors it's not rocket science to reconenct them. Did you short them together and damage the amp?

Dec 25, 2010 | Bose VCS-10 Center Speaker

1 Answer

Need new system input cable for acoustimass 10


I've made a diagram of my serial cable. You can easily make one with some speaker wire and a 15-pin d-type female serial connector. Solder the wires as shown in the diagram.

6ac4306.jpg

Jan 26, 2010 | Bose Acoustimass 10 III System

1 Answer

Gap contact


You can try and use another cable. I've read before that changing the cable can fix that problem. If you know how to solder you can make your own cable. All you need is a female 15-pin d-type connector and some speaker wire. Here's a diagram of the connections:

6e516bf.jpg

Sep 28, 2009 | Bose Acoustimass 10 II System

1 Answer

I have a pair of redline bose cube speakers and an acoustimas. I don't have cable for the connection. I would appreciate if someone help me showing diagram and which cable I should use it. Thanks


You can make a serial cable for it. All you need is a 15-pin d-type female connector and a bunch of speaker wire. Solder the speaker wire as shown in my diagram.

a0b0655.jpg

Sep 22, 2009 | Bose Acoustimass 10 III System

1 Answer

My sound in cable was missplase and can i make it my self and pls any body can send me the cable structre. pls...........


Here's a diagram of the 15-pin serial input cable that came with my Acoustimass 10 IV system. You just need a 15-pin female d-type connector, one RCA connector and a lot of speaker wire. Here's my diagram:

ef142c2.jpg

Mar 10, 2009 | Bose Acoustimass 10 III System

1 Answer

Front bose speakers and bass module stopped puttimg put sound


If you're saying you hooked the Bose speakers directly to the Yamaha's amp instead of the prescribed way through their own bass module - they're cooked.

Dec 23, 2008 | Bose Lifestyle 12 System

1 Answer

'05 Chevy Z-71 w/ BOSE stereo upgrade. How can I wire the BA-200 ?


Unfortunately, it's not as simple as a crossover. Bose gets its name from making complete systems - meaning - Bose speakers work right because the amplifier is custom built for those speakers, and the deck is custom built for the amplifier- all Bose from beginning to end. The only way to bypass any part of a Bose system is to bypass the whole system, including amp, deck, subs, speakers, eq's, and start over from scratch, unless you are an electrical engineer and can meter components and evaluate them. Bose often has 1 or 1/2 ohm speakers which will not work with after market systems.  If you go to a Bose store, the only system that sounds good is the lifestyle system because it is Bose from beginning to end, just as an example. They are either cheaters or geniuses

Oct 15, 2007 | Audiovox BA200 Car Subwoofer

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...