Question about Sharp Microwave Ovens

2 Answers

Our Sharp R-930CS-P sticks and is very hard to open, will open from the push button if you push it hard

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Something must have spilled into the mechanism and dried there. You'll need to access and clean it out.

Posted on Oct 26, 2019

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sharp Master
  • 9,179 Answers

Your door open button or door open lever is worn or broken.

If your oven is mounted in a cubby type enclosure, you will have to remove the trim kit, slide it out partially, unplug it, then slide it completely out and set it on a table top to work on it.

The service manual has safety information, disassembly information, and parts information including parts numbers. I have uploaded it to my site here: http://www.microwavecontrol.com/R930cs_sm.pdf

You can order Sharp parts from Encompass here http://tinyurl.com/7qy85y
or Sears here http://goo.gl/zWz6Bz

Feel free to contact me via my Web site http://www.microwavecontrol.com if you need further assistance.

Posted on Oct 26, 2019

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 4 Answers

SOURCE: Sharp Microwave model R-1850A door won't open

buy a boddle of WD-40 and try spray some in the raded spots.Im not a big specialist in microwaves.hope it helps

Posted on May 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp Carousel R530BK microwave won't cook unless light pressure is kept on the door button.


There are door switches and one of them is evidently out of adjustment or the little actuator arm on it is.

Nov 27, 2013 | Sharp R530EWT Countertop Microwave Oven...

3 Answers

Sharp R-930CS microwave turntable stopped turning and neither convection or microwave are working (ie. not heating). Lights and fan turn on and counter counts down normally.


Look inside for one of many thermal cutouts (button type) test each for continuity (with the unit unplugged of course). Also look for burned wires and repair or replace them. If you get it running and it works fine... we're done. If it still acts up then replace the magnetron and or the capacitor.

Oct 19, 2013 | Sharp Microwave Ovens

1 Answer

My microwave door sags to the right from the top hinge. The microwave is a Sharp R-930CS. How do I adjust this?


The only adjustment is by removing the outer cabinet and examining the hinge side will be self explanitary.
Beware that the door must close squarely and if it is very mal adjusted will take out the mains fuse!

Oct 19, 2010 | Sharp R930CS Microwave Oven

1 Answer

Sharp Microwave model R-1850A door won't open


buy a boddle of WD-40 and try spray some in the raded spots.Im not a big specialist in microwaves.hope it helps

May 10, 2009 | Sharp R-930AK Convection/Microwave Oven

2 Answers

Sharp Carousel R-930CS-F Wont heat


CHECK YOUR FUSES. IF GOOD IT MAY BE THE MAGNETRON IS BAD

Apr 17, 2009 | Jenn-Air JMV8000 Microwave Oven

2 Answers

Turn table has stopped working in sharp r-930cs


We have the service manual for that model and have uploaded it to our site for you here.

Chances are the coupler or motor is bad.

You can see and hear a video of how a turntable motor should sound when you rotate it by hand.

If yours won't rotate or it sounds like it's grinding, etc., you may have a bad motor or plastic coupler.

The best place to order Sharp parts is Tritronics.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.


Jul 16, 2008 | Sharp Microwave Ovens

1 Answer

Sharp Microwave model R-1850A door won't open


Hi ,there are two posibility to repair . 1. by ordering parts to the web site of sharp .
2. You may check from shop same type of part bring sample or in the appliances center near you.

Jan 14, 2008 | Sharp R-1850A Convection/Microwave Oven

1 Answer

Sharp carousel under counter microwave start doesn't always work


Sounds like an intermittent door switch or a loose door switch mount. Very common.

At our site, we have critical safety information, info on door switch diagnosis and replacement, and disassembly information.

See our listing here on FixYa: http://tinyurl.com/yzjozk

Oct 14, 2007 | Sharp R-9H66 Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Sharp Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...