Question about GE Ovens

Open Question

Ge monogram double oven touch pad not working

My oven is about 7 years old touch pad is not working at all , the screen is on but not responding , beeps every 25 seconds

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: JTP56 Double Oven Beeping and Display FO Code


http://www.fixya.com/howto/h155060-dreaded_f7_error

Posted on Jul 26, 2008

Ad

D Clare

  • 116 Answers

SOURCE: GE monogram double oven display getting extremely hot

Usually the knob type controls uses the bulb for temperature regulation. There is usually only one adjustment available - otherwise the thermostat has to be replaced. - that dial with the temperature graduations on it. the whole unit - the bulb in the oven is connected to it.

Posted on Aug 31, 2008

Sea Breeze

John Tripp

  • 4656 Answers

SOURCE: GE Profile JT952 Touch Pad Button Issue



Try this link
http://www.fixya.com/howto/h155060-dreaded_f7_error

Posted on Mar 28, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: F1 error/touch panel not working on GE Monogram Dual Oven

Usually, the F1 means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled, replace the oven control (also called clock or ERC), touch pad, or both.

I recommend a service call for this repair.

Posted on Jun 03, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: GE JKP27WP1 Built-In Double oven

Try gaining access to the touch pad and, try to free up the start button. if this is unsuccessful, replace the touch pad.

Posted on Jun 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our monogram double wall oven has a f7 code on the control panel. None of the buttons appear to be working, except clear, which clears the code. Then still no buttons work, and the f7 code comes back. What...


It's most likely that the error code you are seeing is F1, not F7. F1 is a code for 'stuck touch pad'. You will need to replace the clock/ERC or the touch pad (or both).

Feb 28, 2011 | GE Monogram ZET3058SHSS Stainless Steel...

2 Answers

Have a GE Monogram Oven Single Wall Unit. Began Flashing F1 last night. Model GL2788960. Its hard wired so I turned off breaker let it cool down and turned back on. Still Beeping.


F1 touch pad / ERC test This simple test will help determine
whether the ERC (Electronic Range Control or Clock) or the touch pad is
defective when F1 error code is present.



Note: Some models incorporate the touch pad in to the ERC as a single
assembly, in which case this test is not necessary. Simply replace the ERC
(Clock).



Warning: If you feel in any way uncomfortable performing this test or
making this repair, please contact a qualified appliance repair technician.


1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing


2. Gain access inside the control panel.

3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC


4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was


5. Turn the power back on.

6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound)


7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.




Dec 18, 2010 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

Touch pad for the oven does not work


eith touch pad or control board un plug the touch pad if it returns the board is bad if it dont the touch pad is

May 27, 2010 | GE Profile JTP56 Electric Double Oven

1 Answer

FO error message. Oven light stuck on. No buttons work.


The F0 is a Function Key Stuck error - Replace touch pad or touch pad and control board if it is one assembly. Refer to F1 Test for more information.


How To Perform A F1 Touch Pad / ERC Test
This test is easy to perform and will help you determine whether the Electronic Range Control (ERC, control board) or touch pad is defective when the F1 code is displayed.

Note: With some models, the ERC and the touch pad are one single unit and therefore this test is not necessary. The entire assembly must be replaced.

Warning: If you have any doubts in your ability or safety of the repair, please contact a qualified appliance repair technician.

1. Disconnect the power to the range by either unplugging the power cord, or turning the power off at the circuit breaker. Always make sure the power as been disconnected properly before beginning this test.
2. Access the control panel.
3. Disconnect the touch pad ribbon from the ERC.
4. Reassemble the control panel. Make sure to check for any additional defects such as frayed or lose wires that could be causing the problem.
5. Turn the power back on.
6. Wait up to an hour for the F1 code to reappear. This could be accompanied by an alert such as a beeping sound.
7. If the F1 code reappears, replace the ERC. If it does not, replace the touch pad.

Nov 06, 2009 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

F1 error/touch panel not working on GE Monogram Dual Oven


Usually, the F1 means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled, replace the oven control (also called clock or ERC), touch pad, or both.

I recommend a service call for this repair.

Jun 02, 2009 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

F7 beeping an cannot stop it... any solutions?


HI, if this error code cannot be canceled, this will confirm a touch pad issue. the membrane is damaged and, this will require you to replace the ERC.

Replacing the Electronic oven control will fix this issue.

Mar 29, 2009 | GE JKS05 Electric Single Oven

1 Answer

GE JKP27WP1 Built-In Double oven - the start button on the touch pad doesn't work. Everything else works fine. Haven't received an error code.


Try gaining access to the touch pad and, try to free up the start button. if this is unsuccessful, replace the touch pad.

Dec 16, 2008 | GE JKP27 Electric Double Oven

1 Answer

Monogram refrigator


If this is the refrigerator with the digital interface (not a dial knob) then there should be a touch pad for you to press to lower this temperature - otherwise you may have a fridge which is not completely sealed when closed or if you have a ice dispenser the flap covering the ice chute is open

Aug 08, 2008 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

Power surge, and pad won't work


Hi,
This may be related to the F7 problem. I have a post on this site.
Go to the following link:
http://www.fixya.com/howto/h155060-dreaded_f7_error

I have shared this fix with over 1400 folks and most report success. I hope that it works for you too.

Nov 20, 2007 | GE Profile JKP56 Electric Double Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...