Question about RCA Televison & Video

1 Answer

How to fix RCA tv model RTU5540-C no respond with the remote control but with the key buttons work perfect

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • RCA Master
  • 76,177 Answers

Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Posted on Nov 14, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: My Sony Trinitron TV does not respond to remote control commands

the tv wont come on the standy timer light is on

Posted on Jan 02, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: lost code book for RCA universal remote control

Hi. here is the code you have requested. 002


have a great day

Posted on Mar 24, 2009

jerryg50

Jerry Greenberg

  • 1691 Answers

SOURCE: LG TV 32LB9D VOLUME STUCK AT 100, NO RESPONSE TO REMOTES

The fault may be on the control board. Sometimes the button switches can be stuck, or there may be something causing some conduction on the control circuit board. It is also possible to have a component failure that is causing a continuous command to keep the volume to the high position.

Something that causes failures of controls in TV sets is when people clean the screen, they spray liquid cleaner on the screen. Some of it drips down in to the controls and on to the circuit board. This will usually cause damage, and thus the set will require shop service.

Jerry G.


Posted on Apr 10, 2009

Anonymous

  • 6 Answers

SOURCE: I have an RCA remote control model rc27a and an

There are remote codes that will work the basics, Although try another code to get the rest of the functions
http://www.xdiv.com/remotes/
http://www.tvcodes.com/index.html

Posted on Sep 05, 2009

ElecEngrZ

  • 1 Answer

SOURCE: LG LCD TV won't respond to remote controllers

sparrow00, your fix worked for me, and I think I know why. The 1/8" remote input jack on the back of the TV has electrical contacts inside that are probably there to sense the presence of a plug-in remote. When they detect the insertion of this plug they disable the front panel IR (infrared) receiver and the TV only responds to this plugged-in remote and the buttons on the TV itself. After some period of time these contacts get corroded and the circuit is no longer completed between them. The TV now thinks an external remote is plugged in, and it ignores its own front panel IR receiver.

When you plug a 1/8" plug into this remote socket on the back of the TV it wipes away the corrosion. When you remove the plug the internal contacts conduct properly again and the TV responds to its front panel IR receiver. For best results you should plug a 1/8" headphone plug into this remote jack and twist it a few times, then pull it out and repeat several times. Repeat every frew months or whenever the TV acts up.
Thanks for your solution!

Posted on Sep 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a rca model rtu5540 . I don’t know how to activated the USB on the side of the tv, the book they give...they said it s a service port but give no explication how to activate.


USB flash drives require no power up. USB cameras, etc. may have a power button. If you insert, let's say, a flash drive into the TV's USB port, making sure it is fully inserted, it is already powered by the TV. What you are encountering is not a matter of activation but rather access which is granted by settings of the TV. You basically select from "input" menus, the USB choice. The TV then reads what is on the flash drive. You may have to move through the input options using your remote as such controls may not be otherwise accessible. The "input" menu may be the one that allows choice of HDMI, DVD, etc..

Jun 05, 2018 | RCA Televison & Video

1 Answer

Toshiba 32a14 does not respond to remote control


Hello
There is a infrared light sensor inside the TV which detects the infrared rays emitted from the remote control, when we press each button on the remote control. If this sensor has got damaged, the set won't respond to any remote control handset. The sensor can be located just behind the infrared sensor window at the front panel of the TV. To access it, you have to open the TV. It is a three terminal component, will be soldered diretily to front panel circuit board, of with the main baord itslef. Will look somewhat brownish black in colour. There are so many types can be seen . Just look what type if fitted with your TV.
2_4_2012_6_58_45_am.jpg2_4_2012_6_59_07_am.jpg2_4_2012_6_59_34_am.jpgSee some models infrared sensors. Check out which type your TV has.2_4_2012_7_00_45_am.jpg

Feb 04, 2012 | RCA Televison & Video

1 Answer

I have a Sylvania 6424FF tv and i cant get it programmed to a univeral RCA remote the codes listed are NOT working


Hello
RCA- RCU 500 model universal remote has Sylvania TV coded with. The codes are:

006,007,010,011,013,016,027,
033,035,043,049,066,087,089
Programming method

[1] Press the button of the device you want to
control (for example TV).

[2] If the device turns on, press another button,
to confirm (for example CHANNEL UP)

[3] If the device you selected (TV) responds,

you will not need to program the remote.

If the device you selected (TV) does

not respond, you will need to program
the remote
There are very rare RCA remotes, with Sylvania TV can be programmed. Just try the above codes with your present RCA remote control. If it does not help, buy the above model RCA universal remote. You will get code list and all other related documents, how to programme it or so, with the device you do purchase. OK.

Jun 14, 2011 | Sylvania 6424FF TV

1 Answer

Emerson model #lc200em8g wont program with rca model remote rcu600m


Hello
Codes for Emerson TV with RCA- RCU 600 are

..........004, 006, 012, 023

..........024, 025, 026, 027, 028, 029

..........030, 031, 032, 033, 034, 035

..........036, 037, 038, 039, 041, 042

..........043, 044, 046, 047, 123, 124
162, 171, 177, 179, 191, 196, 208

1. Manually turn on the TV.

Find the three digit code for your TV in

the code list below.

2. Press and hold the CODE SEARCH

button until the INDICATOR LIGHT

lights, then release the CODE SEARCH

button.

3. Press and release the TV button (The

INDICATOR LIGHT will blink then

remain lit).

4. Enter the code using the Number

Buttons.

After your code is entered, the

INDICATOR LIGHT will turn off. If the

code is not valid, the INDICATOR

LIGHT will blink. Check the code list

and repeat process.

5. Aim the remote at your TV and press

the ON•OFF button. Your TV should

turn off.

Note: If your TV does not respond, try all the

codes for your brand. If the codes do not

work, or your brand is not listed, try the Code

Search method on page 16.

6. With your TV on, press CH+ (CHANNEL

UP) If the TV responds, no further
programming is required.
OK

Mar 22, 2011 | RCA 257003 Remote Control

1 Answer

What is the code for a symphonic tv and a rca remote. I also need insructions on how to program the remote that works with my tv. I lost the instructions


These are the steps on how to program your RCA Universal Remote Control to your Symphonic TV.
  1. Press and "HOLD" CODE SEARCH.
  2. Press and release the TV button. When the TV button flashes proceed to the next step.
  3. Enter the three digit code. In your case, the code for the Symphonic TV are 064 or 076.
  4. Release CODE SEARCH.
  5. With the TV on, press another button, for example CHANNEL UP. If the TV responds, no further programming is required. If the TV does not respond, repeat steps 1-5 using the other code number.

Jun 12, 2010 | RCA Universal Remote Control

1 Answer

How to clear remote so I can program it again


Link to the manual
http://audiovox2.info/docs/rca_acc/man/D770_DOC_OM.PDF

Problem: The remote is not
performing commands properly.
• You must put the remote in the
correct mode by pressing the
corresponding component key (TV,
VCR, DVD, SAT, AUX1, AUX2) so
the remote knows which component
you want to operate.
• Make sure the component is “ready”
(e.g., DVD player has disc loaded;
VCR has tape loaded, etc.).
• You may have pressed an invalid
key for the mode the remote is in
(e.g., the RECORD key only works
in VCR Mode).
• If you are trying to turn on an RCA,
GE or PROSCAN component, press
the component key (TV, VCR, DVD,
SAT, AUX1, AUX2) instead of the
ON·OFF key.
• If you’re trying to change channels,
try pressing the OK key after
entering the channel number as this
is a requirement of certain models
and brands.
*There is a possibility that a
programmed code may only be able
to control some of your component
features (e.g., only turns a
component on and off). Follow the
steps provided for programming the
remote (See Programming sections
on pages 5–7). If the component can
be turned on and off, make sure you
press the CH+/CH- key to see if the
component responds. If not, try the
next code from the list.

Good Luck :)
PLEASE rate my solution

Dec 18, 2009 | RCA DIRECTV Satellite Remote Control

1 Answer

I have 3 button rca remote to use on phillips tv/dvd with remote n0286ud; but rca remote wont program


Sorry it took so long to respond to your request for assistance. You will have to call the RCA customer support for this problem. They will have all the service information to help you with your problem.You can call RCA customer support at this telephone number 1-800-645-4994. Give them the model number of your remote control and ask them for assistance with your problem programming the remote control.Thank you for using FixYa and have a nice day!

Jan 03, 2009 | RCA 3-Device Universal Remote with...

1 Answer

Lost manual to rca universal remote, lost programing to operate remote


RCA Universal remote codes for the Mitsubishi TVs are...006,011,014,019,022,027,041,056,061,068.
First, turn on TV
Press and hold code search button on remote
Press and release the TV button
Enter the three digit code you want
Release code search
Push channel up, if device responds, that code worked.. If not, repeat steps 1-5 with each code until you find the one that works. This information can be downloaded from http://www.thompsontv.com/rcarc.html
If you want a hard copy with codes for all TVs.

Aug 29, 2008 | RCA Universal Remote Control

5 Answers

Old RCA Universal Remote


The remote model number is CRK93J1

294597d.jpg

you can download the manual at:
http://www.replacementremotes.com/store/downloadpdf.cfm?productid=55977

May 26, 2007 | RCA Universal Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...