Question about RCA Televison & Video
I was just looking for them and then found my manual and felt bad for you guys so I scanned it and uploaded it to photobucket ^^ please feel free to save the remote codes but you may have to zoom in alot to see them ^^
Posted on Dec 15, 2008
Basically, you cannot use the coax connections for both the VCR and the RCA converter box. I would hook up the phono/cinch connectors from the VCR to the TV if you can (these are also called RCA connectors, but I'm avoiding using that name so we dont confuse the digital receiver with a cable/connector name that is the same here). There should be a yellow one for video and red/white ones for left and right stereo. I believe the RCA converter comes with a three headed cable that can do this for you. With this configuration, you can set the TV to input on these connectors and the VCR should always output there. Once that is set, you can still use the converter box to receive the signal from your antenna, then run the coax to the VCR. Now, the VCR will always have to be set on channel 4 in your setup and you will need to manually change channels on the converter box for it to record a show. Does this make sense so far?
Posted on Feb 27, 2009
try:0607-0204-0321-0508-0326-0993-0802-0108-0308-0715-0463-0053-0606-0653-0508-0160-0371-1172-and finally 1253.
Posted on Mar 13, 2009
Use the SKU number of the RCA remote to look for the code here. Click on "Find your Remote Codes Here" at the left side of the screen.
Posted on Dec 22, 2009
Tips for a great answer:
Mar 06, 2016 | Televison & Video
Sep 19, 2015 | RCA (DTA800B1) Video Converter
Mar 12, 2015 | RCA (DTA800B1) Video Converter
Feb 19, 2015 | RCA Digital To Analog Passthrough Tv...
Sep 17, 2011 | RCA Televison & Video
Jun 04, 2010 | Televison & Video
Feb 07, 2018 | Apex Digital AT1308 13" TV
Mar 12, 2009 | Televison & Video
Feb 01, 2009 | RCA Universal Remote Control
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: