Question about Pool & Spa

1 Answer

Where is the filter and pump on Hotpoint first edition wma-22 Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,154 Answers

Http://laundry.manualsonline.com/manuals/mfg/hotpoint/wma22_wma20.html
Doesn't say, other than to take the dispenser drawer out and clean the grate
This video is for an older version but the general theory is the same. Inside the piping at the bottom
https://www.youtube.com/watch?v=uyXvsbDMkrs

https://www.washerhelp.co.uk/forums/topic/81-wheres-the-pump-filter-on-a-hotpoint-washing-machine/

Posted on Nov 15, 2019

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
rylee_smith

Rylee Smith

  • 8619 Answers

SOURCE: Have new Hotoint dishwasher that wont drain. Drain not clogged !?

Hi

If the water doesn't drain from your dishwasher, check these: Pump Your dishwasher pump ejects the water. The pump is usually mounted directly to the motor, then attached to the bottom of the dishwasher. You can reach the pump from inside the dishwasher, but first you need to remove the lower rack, the spray arm, and the spray arm support.

Look for an impeller--a round plastic fan blade-type of device that spins around. This is the wash impeller, which forces the water through the spray arm. Beneath the wash impeller is the drain impeller, which is similar in size and shape to the wash impeller. The drain impeller pushes the water toward the drain port. These components make up the pump. If any of the pump components are defective, you need to replace them.


Drain line/air gap Often the problem is at the point where the drain line attaches to the garbage disposer or household drain line. If you remove this line, you can clear any debris from the hose or hose connection. Be sure to reattach the hose before starting the dishwasher again


Drain valve and/or solenoid Many dishwashers use a drain valve with an electric solenoid. When electricity flows to the solenoid, the valve opens and diverts the water to the drain. Sometimes the solenoid, or the diverting lever, sticks and prevents the dishwasher from draining or filling properly. Try to free up the solenoid to lubricate the lever. Otherwise, you may have to replace the solenoid or pump assembly. With these systems, the motor always rotates in one direction. When it's energized, the drain valve diverts the water.

Other dishwashers simply reverse the direction of the motor to drain the dishwasher. These units don't have a drain valve. Instead, there's a drain hose connected directly to the pump housing.

Belt One brand of dishwasher uses a belt to drive the pump. If this belt is broken or has fallen off, replace it.

Motor If the motor isn't turning or working, the unit won't drain. First check to be sure you have power to the dishwasher. If not, see the section "It doesn't work at all." If the motor hums but doesn't turn, it may need to be replaced.

Some dishwashers are susceptible to getting stuck if you don't run them regularly. If you haven't run the dishwasher for more than a week, you may need to manually spin the motor to free it up. If the motor is defective, you need to replace it. Dishwasher motors can't be serviced.

Timer Part of what the timer does is control the motor and drain valve. If the timer doesn't work properly, the water may not drain and you need to replace the timer. This problem is uncommon.


Please do rate the solution as "FixYa" if found useful and revert for further assitance.

Thanks
Rylee

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hotpoint hff31014uk and have no installation guide can't find it anywhere online and can't get through to hotpoint please can anyone help


Double check your model # Hotoint says it's not a valid # then go here for your manual...
http://www.hotpointservice.co.uk/category/refrigeration/

Apr 01, 2016 | Hotpoint Washing Machines

1 Answer

How do i open jammed door on hotoint WD440 washing machine


Some how check to see if it is something in the machine jammed against the door or press on the door while you try to move the unlock lever. Good luck.

Aug 18, 2014 | Washing Machines

1 Answer

Hotoint WMA34 door light keeps flashing and machine wont start


The light flashing usually indicates that the door is not closed securely. this can be caused by a weak or broken door handle spring.
If you are satisfied that the handle is o/k, then the other possibility is that the control module has a blown track, this can be accessed by removing the top cover.
Hope this nhelps.

Jan 15, 2010 | Hotpoint Aquarius WMA42 Front Load Washer

2 Answers

IS A HOTOINT FRONT LOADING WASHER TYPE WF860G [SUPER SILENT] MODEL A HOT/COLD FILL OR COLD FILL ONLY.


This model like most new models are cold fill only.. It will heat to the temperature set by the variable thermostat setting..

Dec 17, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Have new Hotoint dishwasher that wont drain. Drain not clogged !?


Hi

If the water doesn't drain from your dishwasher, check these: Pump Your dishwasher pump ejects the water. The pump is usually mounted directly to the motor, then attached to the bottom of the dishwasher. You can reach the pump from inside the dishwasher, but first you need to remove the lower rack, the spray arm, and the spray arm support.

Look for an impeller--a round plastic fan blade-type of device that spins around. This is the wash impeller, which forces the water through the spray arm. Beneath the wash impeller is the drain impeller, which is similar in size and shape to the wash impeller. The drain impeller pushes the water toward the drain port. These components make up the pump. If any of the pump components are defective, you need to replace them.


Drain line/air gap Often the problem is at the point where the drain line attaches to the garbage disposer or household drain line. If you remove this line, you can clear any debris from the hose or hose connection. Be sure to reattach the hose before starting the dishwasher again


Drain valve and/or solenoid Many dishwashers use a drain valve with an electric solenoid. When electricity flows to the solenoid, the valve opens and diverts the water to the drain. Sometimes the solenoid, or the diverting lever, sticks and prevents the dishwasher from draining or filling properly. Try to free up the solenoid to lubricate the lever. Otherwise, you may have to replace the solenoid or pump assembly. With these systems, the motor always rotates in one direction. When it's energized, the drain valve diverts the water.

Other dishwashers simply reverse the direction of the motor to drain the dishwasher. These units don't have a drain valve. Instead, there's a drain hose connected directly to the pump housing.

Belt One brand of dishwasher uses a belt to drive the pump. If this belt is broken or has fallen off, replace it.

Motor If the motor isn't turning or working, the unit won't drain. First check to be sure you have power to the dishwasher. If not, see the section "It doesn't work at all." If the motor hums but doesn't turn, it may need to be replaced.

Some dishwashers are susceptible to getting stuck if you don't run them regularly. If you haven't run the dishwasher for more than a week, you may need to manually spin the motor to free it up. If the motor is defective, you need to replace it. Dishwasher motors can't be serviced.

Timer Part of what the timer does is control the motor and drain valve. If the timer doesn't work properly, the water may not drain and you need to replace the timer. This problem is uncommon.


Please do rate the solution as "FixYa" if found useful and revert for further assitance.

Thanks
Rylee

Apr 05, 2009 | Dishwashers

1 Answer

Hotpiont ffm90 fridge not chilling


hi if the freezer appears to work and the fridge if warm,the problem is that the freezer is over frozen and blocking the vents which send cold air into the fridge when required,and the noise is the fan hitting the the ice build up,defrost (switch off)your applinace for at least 36 hours then switch back on,you will then find after the freezer reaches -12 the fridge will then start to go cold.

Mar 09, 2009 | Hotpoint FFM90 Bottom Freezer Refrigerator

1 Answer

No instructions


Go to:
www.hotoint.co.uk.
Scroll down and click on www.hotpoint.co.uk.
Click on after sales and then click on down load instruction books, type your model number in and you can save it to your hard drive, or print it off.
Plz rate my solution.
Thanks.

Dec 16, 2008 | Hotpoint First Edition WMA12 Front Load...

1 Answer

I have a hotpoint ctd80 showing error f13, have cleaned all the filters, and cleared the water and still it doesnt clear error on the low heat setting


F13 indicates the rear thermistor is open/short circuit, this is part of the heater circuit. it is akin to a thermostat, but there is more than one!!
Hotoint recommend you call an engineer..
I am assuming that this is a lcd tumble dryer.
Plz leave feedback.
Ta.

Dec 10, 2008 | Dryers

1 Answer

All Lights Flashing on Hotoint Aquarious WF310 Washing Machine


Means that the heat sensor is broken.
Replace that and it should fix your problem

May 09, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hotoint 800 delux 9526


get an engineer to do it , much easier , its not hard but for a novice fiddly . an enginner should also bed the new brushes in with a special stone ... i normally charge about 40 pound including parts .

Mar 11, 2008 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Pool & Spa Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Bill Jordan

Level 2 Expert

375 Answers

john h

Level 3 Expert

22486 Answers

David Spradling
David Spradling

Level 3 Expert

10627 Answers

Are you a Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...