Question about Coffee Makers & Espresso Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
After grinding did you hear the brew group goes up and pump start? If you hear the pump start and stopped, itis blockage in the brewunit metal screen. Just needs cleaning.
If you don't hear the pump starting, the problem is with the faulty micro switch inside the gearbox , that is behind the plate of brewunit.(service center job)
Posted on Apr 15, 2010
SOURCE: Tassimo Coffee Maker: Tell me
• All lights will blink the first time you turn on your
machine. This is your cue to prepare your machine for use by
following the quick instructions in Step 1 on separate insert.
• If the water level runs low while you are preparing a
beverage, all lights will flash. Simply remove and refill the
water container, and brewing will continue automatically
where it left off. It should not be necessary to discard the T-DISC
and start over.
• The AUTO light will blink throughout the brewing process.
Some drinks require a pause in brewing as part of the recipe
for brewing your perfect cup - this is to allow the optimal flavors
to unfold and is a normal part of the brewing process. The AUTO
light will continue to blink throughout this process.
HOW TO MAKE A DRINK
• Place the mug of your choice on the cup stand.
• When the STANDBY light illuminates, insert the T-DISC® of your choice
and close the clamp.
• The HEATING light will blink as the brewer heats the water to the
optimal temperature for your drink.
• Once the proper temperature is reached, the AUTO light will
illuminate. When it lights up, press the start/stop button to begin
the brew cycle.
• The AUTO light will continue to flash throughout the brewing cycle.
PLEASE NOTE: Some beverages have a pause in brewing
after the initial influx of water into the T-DISC®.
• The MANUAL light will illuminate when your drink is ready.
Posted on Jan 14, 2011
Mine does this all the time. There are several reasons why this happens . If you look at the machine from the front, find the part that pierces the disk at the top and dispenses the coffee at the bottom. This snaps in and out for cleaning. Push up on it until it pops out. If you have just used one of the hot chocolate discs and did not run the cleaning disc or rinse this part afterward, the chocolate clogs the spout and you will have to clean it out. If it is not due to a hot chocolate disk, I usually find that the small piece of aluminum that is punched out at the top has either gotten stuck inside the dispenser spout (sometimes more than one is in there) or is laying partially over the mouth in the center. The spout must be clean/clear before the green light will come on. After you pop it out, spray it out or push a pipe cleaner or other sharp object through it to clear it (skewers work, but I have to move it around to get anything that is stuck to the sides). After it's clean/clear, snap it back in place (make sure that it snaps into place). If that does not work, wipe the top and bottom of the disc shelf (there are sensors there, too). If you have had your machine for a long time (like I have), and none of that works, you may have to jiggle the top piece that covers the disc to wake the sense up. Good luck!
Posted on Jul 29, 2012
Tips for a great answer:
Jan 19, 2016 | Bosch Tassimo Tas5542gb Multi Hot Drinks...
Jul 13, 2015 | Coffee Makers & Espresso Machines
Nov 20, 2014 | Bosch Tassimo TAS4511UC Coffee Maker
Mar 25, 2014 | Bosch Tassimo TAS4513UC 1-Cup Coffee Maker
Jan 14, 2011 | Braun Tassimo Espresso Machine/Coffee...
Jan 10, 2011 | Braun Tassimo Espresso Machine/Coffee...
Sep 23, 2010 | Bosch Tassimo TAS4511UC Coffee Maker
Mar 26, 2009 | Braun Tassimo Coffee Maker
Jan 26, 2009 | GE 106591 Coffee Maker
May 09, 2007 | Braun Tassimo Espresso Machine/Coffee...
25 people viewed this question
Usually answered in minutes!