Question about Vizio Televison & Video

1 Answer

I have a E65-E0 vizio display that blinks on and off,But I press the volume button or hit the menu button it stops??????

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 153 Answers

Hi richard-
I found this link.
https://www.techwalla.com/articles/reasons-why-my-vizio-tv-keeps-blinking

Hope this helps.

Posted on Dec 03, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 192 Answers

SOURCE: blue screen and shut off by self

You will need to reset the Netcommand and tuner settings in the set. The little indented button in the front of the set needs to be pushed in (when the set is off). The front light will blink for about a minute or minute and a half. Then, reprogram the Netcommand settings. This should solve your problem. If you need more information, then, reply to this post and I will respond.

Posted on Sep 23, 2007

Anonymous

  • 1 Answer

SOURCE: Volume and menu does not display

I had this problem on my Aquos (LC-46D62U). It was NOT a hardware problem. I recommend turning off the television. Next unplug the television for 5 to 10 seconds. This resets something for the television. Plug it back in and turn on the television. You should now be able to get your volume and other on-screen displays.

Posted on Feb 18, 2008

Anonymous

  • 210 Answers

SOURCE: Help

Hi,

Take every single cable out of the unit, now power on the unit.

If the power protection still shows then there is an internal fault, usually a short or a component defect.

If it powers on ok, switch off and insert 1 speaker at a time and power on the unit until the protection mode comes on again, the last speaker you have put in has overloaded it for some reason, also as you are trying each speaker use the volume and bass controls to see if there is an internal overload.

Thats as much as I can offer you until you narrow the fault down to the unit or one of the speakers.

Cheers

Posted on Jun 09, 2008

Anonymous

  • 3 Answers

SOURCE: Protection displayed and shuts off

Hey guys! Im glad you found my solution on my blog, and posted it here. I hope you ccan fix yours, or get it replaced on warranty. Im happy to help you with anything, the capacitors i think was 4,7 uF, 100volt, not sure. 
Here is the link to my solution: http://lemurt.wordpress.com/2008/08/18/defenition-of-waranty-void/
:D
/ lemurt

Posted on Sep 22, 2008

Anonymous

  • 2 Answers

SOURCE: 52 INCH sharp aquos lcd REMOTE NOT WORKING

Make sure your remote lock is set to off.

Posted on Apr 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program a vizio tv without a remote vizio


Upon first start you should be prompted. If not, you will find a series of buttons on the TV itself; power,channel up down, volume up/down, input and menu. Hit the menu button and the menu will pop up. Scroll up and down with channel button, select and controls are the volume. either that or you can get a Samsung phone that has an app built into it called watch on, which has a universal remote that works for virtually everything. Happy surfing.

Mar 05, 2015 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

How do i stop flashing display mode on kd r856 bt car audio


Try this
1. Press and hold the MENU button
2. Turn the volume to select DEMO and press the volume to enter the sub menu.
3. Turn the volume to select DEMO OFF and press the volume to set.
4. Press MENU to exit.

Feb 23, 2015 | JVC Car Audio & Video

2 Answers

Vizio tv problems


Have you checked the TV without other devices connected to the TV.
Eg. disconnect any home theatre or speakers from the TV.

Verify with audio menu if the settngs of TV speakers is on or off ?
To adjust the audio settings:
1. Press the menu button on the remote. The on-screen menu
is displayed.
2. Use the arrow buttons on the remote to highlight audio and press ok. The AUDIO menu is displayed.
3. Use the arrow buttons to highlight the setting you wish to adjust, then press left/right arrow buttons to change the setting:
• TV speakers - Turns the built-in speakers on or off.

Lastly have you tried restoring the TV to factory default settings.
To restore the TV to its factory default settings:
1. Press the menu button on the remote. The on-screen menu is
displayed.
2. Use the arrow buttons on the remote to highlight system
and press ok. The SYSTEM menu is displayed.
3. Highlight reset & admin and press ok. The RESET & ADMIN
menu is displayed.
4. Highlight reset TV to factory defaults and press ok.
5. If you have changed the default parental control passcode,
enter it now.
The TV displays, "Select Reset to restore all TV settings to
factory defaults and clear all account information."
6. Highlight reset and press ok.
7. Wait for the TV to turn off. The TV will turn back on shortly
afterward and the Setup App will begin

Apr 29, 2014 | Televison & Video

1 Answer

Unable to set up remote URC 22935


MENU • Set Up • Searching For Yor Code • Blinking Back the Code:
Redefining a Key • Punch Through • Volume Default • Clearing Out
Key mover • Favorite Channel Scan • Macro-Sequence

How to Program your One For All remote
(Models URC-2005, URC-2099, URC-4005, URC-4050, URC-6050)



Set Up
After getting the proper codes from your manual or Customer Service, use the following instructions to enter them into your remote.


PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
ENTER the 3 digit code for your brand.
You should receive 2 quick flashes after entering your code.
PRESS the POWER button to test the code. (On VCR,LD,and CD players use PLAY)

menu
Searching For Yor Code
If you have tried all of the set-up codes for your brand of eqipment, or your brand is not listed, and you are still not able to get the unit to respond, try the following proceedure to search for your code.

PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
ENTER 9-9-1 (two blinks on the remote)
ALTERNATE slowly between the POWER key and the DEVICE(TV,VCR,CABLE,etc.) button until your device turns off.(On VCR,LD,and CD players use PLAY instead of POWER)
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
When your device turns OFF, PRESS the MAGIC button and RELEASE it to lock in the code for your device.
menu
Blinking Back the Code:
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 0.
PRESS 1, carefully COUNT the number of blinks. (1st digit)
PRESS 2, carefully COUNT the number of blinks. (2nd digit)
PRESS 3, carefully COUNT the number of blinks. (3rd digit)
If the remote DOES NOT blink it means the number is 0.
This is your 3-digit setup code.
menu
Redefining a Key
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 2.
PRESS the DEVICE,(TV,VCR,CABLE,etc.),key you want moved
PRESS the DEVICE key you want to replace.
Example: If you want the Aux key to be a TV key:
"MAGIC" (2 blinks) 9 - 9 - 2, TV (you want to move TV)
Then AUX (you want to replace AUX).

menu
Punch Through
This sets Volume to work for one device in all modes.
For example, the TV volume will work in the cable and VCR modes.
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 3.

PRESS the device key you would like the volume to come from.

You will get two blinks on the remote.
NOTE: This only sets volume in the TV,VCR,CABLE, or SAT mode.
If you want to set the volume for a device to work just one or two other devices- refer to the instructions under "KEYMOVER-From one button to another"

menu
Volume Default
Use this to get the original volume to work on each device.

PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 3
PRESS the VOLUME+ key, you will get two blinks.

Now The volume is set for all original devices.

menu
Clearing Out
A Device Key
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 2
PRESS the device button twice. - Two blinks.
Any Button On The Remote
PRESS the button you want to clear - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 4
PRESS the button you want to clear twice. - Two blinks.
All Key movers,Macro's, and Defaults
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 8 - 0 -- Two blinks.
Scrambled Keypad
Sometimes it seems that the keypad is "scrambled". Functions like channels, volume, or numbers are not where they should be.
If your remote seems to be acting this way, try the following proceedure:

PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
ENTER 9-7-3 (two blinks) (for URC-2005, try 9-7-4)
Try the functions on the remote
If the keypad continues to act "scrambled", you may:
Be on the wrong code for your device.
A wrong code may only operate a few functions of your equipment or they may be operating inaccurately.
Have something more serious wrong with the remote.
In either case you will have to contact us for more information.

menu
Key mover
An Advanced Function To A Button
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 4.
PRESS the "MAGIC" button and then the three digit extended function.
PRESS the button you wish to use for that function - Two Blinks.
From One Button to Another
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 4.
PRESS the DEVICE and the FROM button
PRESS the DEVICE and the TO button
Two Blinks
EXAMPLE: To take the volume from a TV and put it in the VCR mode,
it would be: MAGIC - 9 - 9 - 4 -TV - VOL UP - VCR- VOL UP - two blinks.
You would have to do the same process for VOL DN and MUTE.


"Shifted" Key Mover
In order to stack a second function on a key; when pressing the button you want the function on in the sequence, instead hit MAGIC and then the button you want.
To use the function: TAP the MAGIC button and release, then TAP the key you chose.
FOR EXAMPLE:VCR-MAGIC(hold 2 blinks) 9-9-4 MAGIC 2-3-4 MAGIC PLAY
If you hit the PLAY button - the VCR will PLAY, if you hit MAGIC -PLAY it will bring up a display.

menu
Favorite Channel Scan
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 6
PRESS the channel to be stored, up to 3 digits
PRESS the ENTER button
REPEAT steps 4 & 5 up to ten channels
If you do not store ten channels, you have to hold "Magic" for four seconds to close Favorite Cannel programming.
NOTE: To stop scanning, press any other button on the remote control.

menu
Macro-Sequence
This will allow you do do several functions with just the touch of ONE key.
PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 5
PRESS the key you want the Macro to be on
PRESS the sequence of keys you want the remote to do
PRESS "MAGIC" and wait for two blinks - RELEASE.


When you hit the key you put the macro on it will automatically start the sequence.

IMPORTANT: The Macro key will be the macro in ALL MODES so it is best to pick a key you will not need for anything else in any other mode.

menu




All Material Copyright Universal Electronics Inc.
"One For All" copyright Universal Electronics Inc.
Any questions about the products should be directed to help(at)ueic.com

Apr 03, 2013 | Televison & Video

1 Answer

Resetting without going to the menu for a vizio m220nv


Get into the Vizio TV service mode

There are to options to get into Service mode:
Option 1:
Turn the Vizio TV off.
Press and hold the CH + & CH - buttons on the TV.
Then press and release the POWER button on the TV Vizio.
Release the CH+ & CH- buttons.
Now press the MENU button on the remote.
You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This if for factory reset).
Press and hold the MENU button for few seconds.
The Service Menu will be displayed.
Option 2:
Turn off th Vizio TV.
Press and hold the CH+ & CH- buttons on the TV Vizio.
Then press and hold the POWER button on the TV.
Keep all three buttons pressed for few seconds.
Now press the MENU button on the remote.
You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This if for factory reset).
Press and hold the MENU button for few seconds.
Service Menu will be displayed.

Feb 18, 2013 | Vizio M220nv 22-inch Full Hd 1080p Led Lcd...

1 Answer

How do i get the parental lock off my set


Hello
To reset the parentian lock password in Vizio TVs do the following
* Get into it MENU and come towards Parential Controls window.

* When the MENU button is pressed, the On Screen Display (OSD) appears on the Image Settings page.
* Press the [Channel Down] button to change to the Parental Controls page.
* Press the OK button and the first of the 4 Password boxes will be highlighted.
* Press the [CHANNEL UP-> CHANNEL DOWN-> VOLUME UP-> VOLUME DOWN] buttons in this exact sequence. Press the OK button
* The password has now been reset to "0000" and the following message will appear.
You can reset it after. The above said buttons will be on the center of the remote control within a circle. OK.

Jul 11, 2011 | Vizio 42 in. LCD TV

3 Answers

I have a new vizio 37", just got it, On some stations the volume is so low, I can't hear it. I have cable tv, the volume on the cable box is way up where it says sterio;when the volume is on 100 % it still...


On remote hit tv button hold set up until it flashes twice. Hit 11758 it will flash 4 times hit set up to lock. Now hit tv button and the volume should work on set.. Hope that works

Jan 30, 2010 | Vizio L37 Television

1 Answer

How do you change the dosage time on a Cimbali Bistro espresso machine


You can do it one of 2 ways, if the machine has a display then you can go through the program mode by removing the face cover on the display and pressing the programing button then navigating to the dose setting menu, then select a button and change the numbers there. Note the numbers are not ounces rather flowmeter cycles.
Second way is to hold down the stop button for 8-10 secs you will notice the lights flashing and you will hear a faint beeping every second, press the button to program then hit stop when you get thew correct volume, when done with all buttons hit the stop again.

Oct 06, 2009 | Espresso RMI La Cimbali Espresso Machine

1 Answer

How do i set the clock on my kenwood kdc-x492


you need to put the headunit in to STANDBY MODE then press he little DISP button to the bottom left of the volume knob. press it for a few seconds. then it will bring up a menu. hit the volume knob down a few times til you see clock set. then PRESS AND HOLD THE VOLUME KNOB IN THE CENTER then it will blink. press the volume knob up or down for hour i believe and left and right for minutes. Once thats done hit the src button again and its done!

Aug 21, 2008 | Kenwood Car Audio & Video

1 Answer

Setting the Clock


1.In the stop mode, press and hold down the MENU/STOP button for at least 2 seconds
The menu setting display appears.
2. Press the SKIP/SEARCH button repeatedly to select dAtE
3. Press the POWER/PLAY button.
The year display blinks
4. Press the SKIP/SEARCH button repeatedly to select the year. Then press the POWER/PLAY button. The month display blinks.
5. Repeat the same step 4 to set the month, day, hour display ("24 H or "12H") hour and minute. Note: "second" cannot be selected.
When the minute setting is completed, "dAtE" returns.
6. Press the MENU/STOP button.

Nov 01, 2007 | Sanyo ICR-B60 Digital Voice Recorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Tony Nguyen
Tony Nguyen

Level 2 Expert

96 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...