Question about Pool & Spa

1 Answer

My Chlorinator was working perfectly and I switched it off at the wall now when I try to start it, all the lites come on and it wont run

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pool & Spa Master
  • 55,370 Answers

Your chlorinator may require a constant supply of power.

Posted on Dec 01, 2019

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
nobody322

_-__-___-_

  • 20706 Answers

SOURCE: why engine runs when ignition is off

gas or diesel.?
what engine, option. they have names and all are different.
is it CARB engine, or EFI? (below is EFI answer) ONLY.
3 possibles. (gas, otto cycle enigine)
1: key switch bad.
2: relays bad. (stuck on)
3: wiring hacking by goons. (too common)

try posting the engine on car, we can not help ,not knowing that 1 fact.
and year.

below is the vast numbers of engines used, on all B gen cars.


as you can see, we are totally helpless to help. with this fact.
post VIN number
if no vin, post chassis tag dead, under ENGINE statement.

Posted on Jul 06, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Empire heater is lite but wont come on


have you check the switch if it is break ?or maybe it has used for a long time .it was out of work .and couldn't discover .you should change a new one.
wall light

May 03, 2012 | Empire DV-35 Heater

1 Answer

Intex Chlorinator Problem: After holding down left arrow and it beeps, i set hours on timer and then it blinks with that number for about 2 minutes and goes to CODE 94=not operating.


First make sure the pump is running and water is flowing through the clorinator. (wont work if water isnt flowing). Make sure water is going in the right direction. (into chlorinator on the right side from the pump, and out of the chlorinator on the left side). The timer controls can be touchy.Try increasing the hours by holding the up arrow until the time is one hour more than you want, then use the down arrow to get it back to the time you want. Sometimes it wont cooperate with increasing the time and just stays at 1 hour, so you have to keep trying a few times.

Apr 09, 2011 | Intex Automatic Salt Water System for ...

1 Answer

Have a Rinnai thru-the-wall 1001f. Has run flawlessly for over 15 years until now. When the heater runs, it runs fine. But we find the heater is turning itself off more and more lately. On the front panel...


I had the same very exact problem and got my hands on the service manual for the Rinnai 1001 series heater to solve it. As fas as the spark gap it should be 3mm but I went through a lot of tests of the components and found that Solenoid 1 coil was open. It should read about 1.3K and mine was completely open. Solenoid 1 is the one against the back cover. You'll need a small inspection mirror to see it but it is part number C23B-23. REMOVE POWER/UNPLUG FROM THE WALL FIRST then pull the plugs off all of them and check the resistance of the coils, they all should be about 1.2-1.3K. If you havent already found the answer I hope this helps.
Also check the pressure switch, bottom right side in the front. Its a disk, diaphram type device about 4 inches in diameter with a microswitch on it. That switch should close, zero to 1 volts across it, once the combustion fan starts up and builds a little pressure. If it doesnt it could be the switch or the intake or exhaust parts of the flue or filters are clogged.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/john_32f4b76dad4781c4

Jan 16, 2011 | Heating & Cooling

1 Answer

The boiler just wont start up, possibly the pilot light??


You probally just picked up enough dirt to clog the filter enough to shut the heater down. If the water flow slows enough the heater will boil the water inside it You have a presure switch in the heater to avoide this. All you probally have to do is clean the filter and baskets to get enough flow to start it again.

Apr 27, 2010 | Jandy Lite 2 Natural Gas Pilot Light...

1 Answer

Headlights on 1999 Dodge Grand Caravan do not turn off properly. When we turn them off with the switch, the car doesn't recognize it and it drains the battery overnight.


its probably your day time running lite modgual located on your fire wall if you unplug it your lights will work but you wont have daytime running lights

Mar 14, 2010 | 1999 Dodge Grand Caravan

1 Answer

4 wheel drive wont work . lite blinks lite flashes


under the hood ,in the center of the fire wall is the relay that sound bad

Nov 25, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

How can i determine if my water chlorinator on my well water conditioning system is functioning properly ?


I expect this is a tablet style chorinator, if so look to see if the chlorinator is using chlorine tablets. These chloriantors work off a run time clock tied to the well pump; when the well pump runs the timer within the chlorinator is energized, after a predetermined amount of "run time" the chlorinator drops a tablet. If you feel it is not operating properly I'd bring in a water well professional; remember we are speaking of the aquifer, too much chlorine in your water may affect your neigborhood.
I hope this may have helped,
Tom

Oct 04, 2009 | Plumbing

1 Answer

The blinking green lite that wont go off wont allow the tv to come on tv must be reset each time sometime reset works and sometime tv off for days have to unplug from wall for couple days then replug and...


The blinking green lite that wont go off wont allow the tv to come on. We tried resetting the tv it doesn't work Also the tv has been off for days have to unplug from wall for couple days then replug and reset. It still doesn't work. Please help.

Sep 25, 2009 | Televison & Video

2 Answers

2000 crown victoria -brake lites failed


You have a bad switch at the brake pedal. Or a loose wire. Try light pulling on the wires on the switch at the brake pedal under the dash. They should be tight and secure. If tight and secure the switch could be bad.

Jul 03, 2008 | 2000 Ford Crown Victoria

Not finding what you are looking for?
Pool & Spa Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Bill Jordan

Level 2 Expert

375 Answers

john h

Level 3 Expert

22486 Answers

David Spradling
David Spradling

Level 3 Expert

10627 Answers

Are you a Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...