Question about HP Office Equipment & Supplies
SOURCE: error 6 hp laserjet 1120 mfp
The problem is that the motor that drives the scanner probably overheated and because of the cheap plastic that HP used it melted important points that the motor relis on...so - remove the glas of the scanner(there are some screws - one of them hidden under the label of the panel,unhook the interface cable of the panel).Now you should see the scanner - flip it over and look at the motor exle and the gear that it should mesh with - they are not aligned at this time.To fix it i used 2 small pieces of plastic - sticked it under the motor so that it can not move in vertical direction anymore. Simply this is the solution that i used and it works just fine :) If you have any questions dont hesitate to contact me. firstname.lastname@example.org
Posted on Jun 15, 2009
SOURCE: SCANNER ERROR 12
it is a physical brocken piece that supports scanner mechanism.
if you open that plate /scanner mechanism and if you drill that plastic sheet and try some manufactureed alluminium or metal projection and place it in the hole drilled by you and put washer and screew so that that supports ;the scanner mechanism and your scanner /printer works . the scanner mechanism may costs you around 3,000-00 rupees.
Posted on Apr 19, 2010
To perform a cold reset
1 Turn the MFP off and then on.
2 When the memory count appears on the control-panel display, press and hold 6 until all three
LEDs flash once and then stay on. This might take up to 20 seconds.
3 Press 3 four times until COLD RESET appears on the control-panel display.
4 Press 6 one time. The MFP continues its initialization sequence.
Posted on May 07, 2010
Tips for a great answer:
Dec 13, 2015 | HP Office Equipment & Supplies
Nov 01, 2014 | Office Equipment & Supplies
Sep 23, 2013 | HP LaserJet M1005 Printer
Apr 22, 2011 | HP LaserJet M1005 All-In-One Printer
Oct 10, 2010 | HP LaserJet M1005 All-In-One Printer
Jun 03, 2010 | HP LaserJet M1005 All-In-One Printer
Mar 19, 2009 | HP LaserJet M1005 All-In-One Printer
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: