Question about Measuring Tools & Sensors

Open Question

How do I register for the warranty for acurite weather station?

Posted by on

Ad

4 Suggested Answers

Darrin

  • 17 Answers

SOURCE: My AcuRite 00992 wireless weather

Double check the batteries to make sure they are installed correctly. If one of the batteries in the outdoor sending unit is in backwards, it will not send the outdoor data. On the indoor unit, there is typically one battery that is used for receiving the signal from the outdoor unit. If all of the batteries are in correctly but that one, you will see the display and the indoor temperature information, but the outdoor information will not be displayed.

Posted on Oct 21, 2010

Ad

SOURCE: manual for acurite ik634160 weather station

http://www.acu-rite.com/product-manuals.html
http://www.ehow.com/way_5552159_acurite-atomic-clock-setting-instructions.html
Please find what you want at the above links....

Posted on Oct 12, 2011

Ad

Ray Nardo

  • 1 Answer

SOURCE: Sharp Weather Station Model SPC344 The outside

After inserting the batteries, DO NOT set the time until the OUTSIDE temperature registers. That's the trick.

Posted on Nov 06, 2011

terryskelly

Terry

  • 10816 Answers

SOURCE: change the language on my acurite weather station from spanish to english

https://www.acurite.com/support


https://www.acurite.com/support


Click on link above to acurite weather station support site.
It gives email responses, and reports that telephone support is very busy.

Posted on Mar 17, 2018

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My station has quite registering the rainfall amount


This is nearly always due to the batteries not having quite enough power. Oddly enough, it is normally the battery in the head unit, not the satellite unit. Mine are powered by CR2032 button batteries. I buy them 10 at a time in a bulk pack from here.

Battery Buyer Batterybuyer com

Oct 10, 2016 | Klockit AcuRite 02001A1 Weather Station...

2 Answers

Why can't I receive input from the outside sending unit?


Make sure that all the batteries are good!!
This procedure outlines the typical process to pair the sensor and base.
Base Station Battery Installation

·Remove the printed vinyl label from the LCD screen of the base station
·Position the remote sensor near the base station
·Open the battery compartment at the back of the base station and insert (2) AA batteries according to the polarity markings. Replace the battery compartment cover.
·Within a short time the RF signal icon (located to the left of the outdoor temperature channel indicator) will start flashing. This indicates that the base station is ready to pick up the RF outdoor temperature signal from the remote sensor. It will continue to flash for 3 minutes or until the signal from the remote sensor is detected.

Register the Remote Sensor
·Open the battery compartment at the back of the remote sensor and slide the channel selector switch to your desired channel. For the first remote you may select any channel, for additional remotes select any unused channel
·Insert (2) AAA batteries according to the polarity markings. Be sure to install the batteries in the remote within the time that the RF signal icon is flashing on the base station. 1541 WeatherGuide Wireless Weather Forecaster with Barometer

Jan 07, 2016 | Measuring Tools & Sensors

1 Answer

Why isn't my AcuRite pro weather station reporting to weather wunderground


Please verify that you have entered your WU Station ID and password into the "Share My Bridge" section on your AcuLink account. This will allow the data to be sent to their servers.

If you are still having trouble, please feel free to contact Customer Support at 1-877-221-1252 or info@chaney-inst.com for further assistance.

Jun 27, 2015 | Acu-Rite Acurite Wireless Indooroutdoor...

1 Answer

Acurite weather station not working,flashing off and on


In order to best troubleshoot this, we would need the model number of your unit. This can typically be found on the back of the display, or the front page of the instruction booklet. To find more information and troubleshooting tips on any of our units, please visit http://www.acurite.com/kbase.

Mar 31, 2015 | Measuring Tools & Sensors

1 Answer

Next tech weather station is. Not w


Try taking the inside unit outside as close to the transmitting unit as possible for three minutes. The signal might lock on to the setting you want to receive.

Jul 01, 2014 | Acu-Rite Acurite Wireless Weather...

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

717 Answers

Brad Brown

Level 3 Expert

18165 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...