Question about Yamaha Audio Players & Recorders

Open Question

YAMAHA A/V RECEIVER RSV 5890 DIM DISPLAY - Yamaha Audio Players & Recorders

Posted by on

Ad

5 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 52 Answers

SOURCE: I have the Yamaha 5890. I recently had the cable

Check to see if the tech switched your tv's settings for VID 1, VID2 etc, then check the box to see if the right settings are in there, ususlly done with the box off and using the setup or menu buttons with the tv on, lastly see if the box will work as a stand alone hook it up to the tv the old fashioned way and see if it works if s you may need to replace a video cable.

Posted on Nov 29, 2009

Ad

thebigdoghim

  • 128 Answers

SOURCE: I have a Yamaha HTR-5890 receiver and I am trying

must have the tape monitor to work the regular tape loop does not physically go back into the receivers processor.

only other solution is if the receiver has PRE out and ins use the PRE out to the EQ then back into the PRE in.

if you have the OUT but no in then the solution would be to go out of the EQ and into an external amp.

In my experience "young adults" like using EQ's to boast bass output.

If that's your goal a POWERED subwoofer is what you need.(check out polk audio direct on ebay)

Your unit is a 7.1 surround receiver the reason that it doesn't have the capability for an EQ is that it messes up the surround sound processor.

If the sound is not what you are looking for the issue more than likely is with the speakers. post a messege with what you want to achieve and I'll try to point you in the right direction.

Posted on Dec 29, 2009

John Weinreich

  • 336 Answers

SOURCE: How can I get a

https://www.yamaha24x7.com/yamahaoms/Login.aspx
(888)-892-6242, Monday through Friday, from 7:30AM - 5:00PM Pacific Time (closed 12PM - 1PM).

Posted on Jan 31, 2011

jimmyscw

  • 2 Answers

SOURCE: Yamaha front panel display dim

Yamaha RX-V661 LCD / Front panel.





Symptom: when you first turn it
on, you can see a VERY little light but after 5 sec, you cannot see it anymore
or for most of us, we started using a flash light. Here is the summary of the solution and I know that it works
because I fixed it today 3/16/2011, 30 minutes ago.
As many pointed out that there is a
"light" 12v - 14v in the back but there is NONE. How do I know? I listened and searched and
there are NONE. The whole LCD in the front is air seal like a light bulb so it
is a light bulb already. Also, you might
see a little burn/gray smoke on the left hand side, don't worry about it
because if the light comes on, it stills work but not enough power. If the LCD
is broken, please don't try by the part and replace it because by the time you
read this, the parts and labor cost as much as buying a new one (on eBay and
not Best Buy).






Problem: in the middle of the unit near the back near the "surround
sound back", there are 3 capacitor rated at (2 units) 35v 220uf 85'C and
(1 unit) 50v 220uf 85'C. What Yamaha did wrong, base on my guess is that they
put the 85'C too close to the heat sink.
The heat causes the capacitor to slowly blown that is why you still get
your power to the LCD but not enough.






Solution: remove the top, unscrew EVERYTHING in the back and there are about 20 ~ good luck. For
those that don't have good memory, please take a picture. There are many plugs inside
that you need to unplug before you can remove 1st layer (audio/ video input)
2nd player (HDMI and Optical input), the last layer you will see 3 capacitors that
are kind of "blown" up (google "bad capacitors" pictures or
video). Remove them then replace them, which you can Google this on tube and
they should teach you how. It was very easy for me but then again, please don't
try to do it if you cannot even change your car oil or build a computer because
I believe that is the difficulty level.






solder iron: $9-$20 get it on eBay or radio
shack

(2 units) 35v 220uf 105'C and (1
unit) 50v 220uf 105'C or what I got was (3 units) 50v 220uf 105'C



I keep the 220uf the same to be
safe but increase the voltage and heat to increase the life of the capacitors.



Good luck everyone,


JimmySCW_991.jpg

Posted on Mar 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a yamaha htr 5890. I would like to hook up


You are probably connected to the pre-out jacks. These are not amplified. Connect them to the B speaker outputs(screw down connectors). If that won't work (and it should), you can connect to the "Presence" speaker connections(spring loaded connections).

Feb 02, 2010 | Yamaha HTR-5890 Receiver

1 Answer

I have a Yamaha HTR-5890 receiver and I am trying to hook up a Yamaha EQ-32 10 band graphic equalizer to the receiver. The frequency spectrum analyzer on the equalizer is working but the graphic...


must have the tape monitor to work the regular tape loop does not physically go back into the receivers processor.

only other solution is if the receiver has PRE out and ins use the PRE out to the EQ then back into the PRE in.

if you have the OUT but no in then the solution would be to go out of the EQ and into an external amp.

In my experience "young adults" like using EQ's to boast bass output.

If that's your goal a POWERED subwoofer is what you need.(check out polk audio direct on ebay)

Your unit is a 7.1 surround receiver the reason that it doesn't have the capability for an EQ is that it messes up the surround sound processor.

If the sound is not what you are looking for the issue more than likely is with the speakers. post a messege with what you want to achieve and I'll try to point you in the right direction.

Dec 29, 2009 | Yamaha HTR-5890 Receiver

1 Answer

I have the Yamaha 5890. I recently had the cable


Check to see if the tech switched your tv's settings for VID 1, VID2 etc, then check the box to see if the right settings are in there, ususlly done with the box off and using the setup or menu buttons with the tv on, lastly see if the box will work as a stand alone hook it up to the tv the old fashioned way and see if it works if s you may need to replace a video cable.

Nov 29, 2009 | Yamaha HTR-5850 Receiver

1 Answer

HTR-5890 receiver keeps shutting down


for the past month i have been shopping for the perfect home theater system and have narrowed it down to a bose system,a sony system and a paramax p510...i have listened to all 3 systems and have found the paramax to be the better system not a cheaper system but seem more bang for my buck at 3200$,a very powerful tube amp and downfiring sub maxes out at 2000 watts...

Nov 14, 2009 | Yamaha HTR-5890 Receiver

1 Answer

The receiver is not turning on. Try all possible solutions ie;Power cord. What is cicurity protection and how do I check for that or correct?


Circuitry protection means the unit is overheating so a fuse blows and shuts down the power to save the electrical components.  You need to find the fuse and replace it.

Oct 25, 2009 | Yamaha HTR-5890 Receiver

1 Answer

Yamaha HTR-5890 not powering up


Power supply is burned out. surge or spike got it, replace power supply unit.

Sep 08, 2009 | Yamaha HTR-5890 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...