Question about Magimix 5150 Food Processor

1 Answer

The center spindle on my Magimix 5150 is stripped and needs to be replaced. Any idea if this is a do-it-yourself project if I can buy the part or should I send it out to be repaired?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Just researching the same problem. Apparently your can find the spare parts here:
http://www.magimix-spares.co.uk/Magimix-5200,-5100-spindle-cover-white,-Nylon-driveshaft-/product/104991/104991/
The old one is has push fit on an inner spindle and apparently can be prized off from outside without dismantling the machine. See the link below for further details.:
http://www.howtomendit.com/answers.php?id=47005

Posted on Mar 30, 2010

  • rab-doo May 08, 2014

    I've replaced this spindle three times now. Check the inside of your blades where they fit on the spindles for wear. Also be sure to be careful with how long you use the dough hook .

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor runs, but why doesn't the spindle turn?


quite likely it has stripped the drive gears teeth off . many have a habit of this .and sadly there is no fixing it .

Nov 18, 2015 | Magimix Food Processors

1 Answer

Can I change the plastic motor spindle on a magimix 5100?


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Aug 29, 2014 | Magimix 5100 Cuisine Systeme Food...

1 Answer

The extension post in my magimix 4200 is stuck on the motor shaft seems like It's welded on can anyone help


How to Change a Magimix Food processor plastic spindle.
This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.

The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.
Cover the main body with a cloth so as not to damage the look of the food processing machine.
Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle
Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.
This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.
When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.
All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Magimix Spares Parts from BBS Ltd

Apr 03, 2014 | Food Processors

1 Answer

My magimix wont turn on


My magimix model 3000 won't turn on I need to send for repair in Kuala Lumpur

Feb 29, 2012 | Magimix 5150 Food Processor

1 Answer

ITS BROKEN AND I NEED TO PURCHASE A REPLACEMENT CASING


I have not seen a secondary supplier carry replacement parts. Suggest you contact Magimix directly via their Customer Service:

http://www.magimix.com/index.php?rid=3536&var=3555&lg=3525

Mar 15, 2011 | Magimix 5150 Food Processor

1 Answer

Magimix blade is stuck


You need to replace the spindle i'm afraid which gets worn after a time. There a UK company that sells replacements and tells you how to replace it. Not a big job though a bit tricky. magimixspares.com

Jun 28, 2009 | Magimix 5100 Cuisine Systeme Food...

2 Answers

Need to fit new switch assembly


Only two screws ?? this must be an older magimix 5000 machine, does the replacement part have a 10mm frame around or flush, the part you need is click here http://www.magimix-spares.co.uk/On-Off-Pulse-switch-with-frame-5000---5100-Chrome/product/101296/

Sep 15, 2008 | Magimix 5150 Food Processor

2 Answers

Magimix sytem cuisine


How to Change a Magimix Food processor plastic spindle.

This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.


The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.


Cover the main body with a cloth so as not to damage the look of the food processing machine.

Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle

Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.


This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.

When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.



All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Jul 02, 2008 | Magimix 5100 Cuisine Systeme Food...

Not finding what you are looking for?
Magimix 5150 Food Processor Logo

816 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magimix Food Processors Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30383 Answers

Ruth summersides

Level 3 Expert

1477 Answers

Are you a Magimix Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...