Question about Williams-Sonoma Stick Blender Handheld

2 Answers

How do you take the mixer off of the wand to clean it?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

While it may be true that you don't ALWAYS need to remove the mixer to clean, there are certainly times where it is very helpful. Not to mention that there are other reasons to remove the mixer, such as to change to a different mixer head type.

Anyway, the mixer is just pressure fit over. After a while, food gets stuck under it, and you have to pull hard to pry it off. I've used a bottle opener as a lever to pull them off after they were particularly stuck on. Usually, the more stuck on mine is, the more food and grit is trapped under there.

So again, no fancy tools, or twist-then-turn required. Just pull harder.

Posted on Feb 13, 2010

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

YOU DO NOT NEED TO ,TO CLEAN MIX WATER AND CLEANING FLUID AND BLITZ THIS UNTILL CLEAN.

Posted on Oct 13, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the difference between a mixer and a blender?


Kitchen appliances will and always will be an essential part of our life. Whether you are a culinary chef our a Permanent house chef :P Hand Blender, Food Processor, Stand Mixer and juicer mixer grinder these appliance will always be a part of your life. With these appliances you can tackle various kitchen chores with an ease; saving you an ample amount of time.

here you can know more

KitchenAid 6 QT Mixer

Oct 17, 2016 | Blenders

1 Answer

Can you remove the mixer part to wash


Before you force it and break something can you not contact Salton in your own country and ask them? Until then if you buzz it up with clean warm water immediately after each use that should keep it respectable.

Jun 18, 2015 | Salton Diner Retro Yellow Malt Shoppe...

1 Answer

How do i purchase new beatters for my mixer


I would go online to the manufacturer. You might also try an appliance store that handles mixers

Nov 24, 2014 | Applica Black And Decker 250w Power Pro...

1 Answer

Ticking sound in kitcheaid mixer


Remove the planetary and see if the noise vanishes, if not then you will need to open up the gearbox. It could be the pin retaining the fuse gear or maybe even the fuse gear itself failing. It seems unlikely though as you were only whipping cream and there is no effort in that.

Sep 03, 2012 | KitchenAid Professional 600 6 Qt. Stand...

1 Answer

Have had my Vita-mix 5000 for several years with no problems. Now, it leaks oily, black liquid around the base, and jerks erratically when the blender is set on the lowest setting (#1 of 10)/variable.


Is it getting hot when you operate it? If you run a mixer for a long
time, the motor will get very warm. On the older units, when the
motor overheats, the various parts of the motor and its container
may start to melt. Mixer motors are not designed to last forever and
a replacement motor may be available from the manufacturer.
Another way is to purchase another similar mixer as you can on
eBay and swap parts.

Aug 21, 2011 | Vitamix 5000 Work Top Blender

1 Answer

Oil Leak-Stand mixer


Leaking of oil in a stand mixer is not necessarily indicative of a large problem.

Kitchenaid stand mixers are overpacked with oil to last the lifetime of the motor. If the motor sits idle for some time (is not used), the oil may begin to drip from the gears and settle. Oil leakage may primarily be seen from around the beater shaft or planetary action.

A stand mixer can lose up to a 1/4 cup of oil before it needs to be serviced.

It is recommended to run the mixer on speed 10 for 2 minutes in order to redistribute oil back into the motor. In order to prevent future occurences, this is recommended to be done every 3 weeks if mixer is not being used.

Jun 18, 2009 | KitchenAid Kitchen Aid Kitchenaid 5-speed...

1 Answer

The chopping disc won't attach to the wand.


There are two grooves in the C blade which may be clogged up with food residue. What you need to do is get a sharp knife and score the two grooves to remove the residue, then the blade should have a better chance of staying on the stick.

The C blade is the one you use most, so that's why it would be having the problem. You probably don't have as much residue built up on the grooves of the Aerating or Blending blades.

Apr 06, 2009 | Bamix Deluxe Handheld Blender

1 Answer

Beaters


KitchenAid Turbo Beaters - Stainless Steel
Model: KHM2B

$14.99

Features:
Replacement or Extra Set of Self-Cleaning Stainless
Steel Beaters Mix Cookie Dough Easily.

Turbobeaters fit only Hand Mixers manufactured since
September 1997.

If you have a model produced before 1997 please call
the KitchenAid Customer Satisfaction Center at
1-800-541-6390 with the model and serial number from
your hand mixer for further assistance.

Mar 23, 2009 | KitchenAid Kitchen Aid Kitchenaid 5-speed...

6 Answers

Braun blender 4191 motor part does not work. fuse is alright. cannot open the cover in order to asess the damage. please advise.


My GF broke our Braun handheld mixer type 4191 500W, trying to mix some figs, the mixer doesn't do anything anymore. I like the mixer very much. I poked a while trying to open it and look what is wrong. This is what i found to open it. On the top, where the numbers are to adjust the speed: remove gently that lid. Below that you'll find 2e lid with the numbers on (1-5), this you can get open by pressing inside the 2 holes with 2 little screwdrivers, push these 2 black tips away and the 2e lid can be removed. Unfortunately i broke my mixer up trying. Now it's open i see how it was. Good luck guys

May 01, 2008 | Braun MR 5550 M HC + BC MultiQuick...

1 Answer

My hand mixer stopped working.


Have you tried greasing it near the blade. I read in my instruction book that sometimes they seize if they aren't used often. They also suggest trying to soak the wand in a pot of hot water for a minute or two and then trying to use it in the water. Hope this helps

Aug 30, 2007 | Bamix Gastro 200 Handheld Blender

Not finding what you are looking for?
Williams-Sonoma Stick Blender Handheld Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Williams-Sonoma Blenders Experts

eyecam

Level 2 Expert

96 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Ross Keen

Level 3 Expert

1361 Answers

Are you a Williams-Sonoma Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...