Question about Denon AVR-2807 Receiver

2 Answers

AVR 2807 shuts off at high volumes

I have a Denon AVR 2807 receiver.  When playing DVDs, the receiver often shuts off at high volumes.  The DVDs are playing on a Toshiba HD DVD player and the problem occurs with both regular and HD DVDs.  Any help or suggestions would be appreciated.  Thanks.

Posted by on

  • robert2 Feb 09, 2008

    My Denon AVR-2807 receiver shut off tonight, while playing a DVD loud. The display is completely off now, despite resetting the receiver, powering down, etc.



    The power comes on and off, but the display never lights up at all, and no video or audio output occurs.



    Any suggestions?


    Thanks,



    Rob

  • Anonymous Feb 11, 2008

    I have THIS SAME problem. I don't know how to troubleshoot it. I am running very old speakers, but, can't replace them.



    What to do?



    Kim

×

Ad

2 Answers

You may have leaky Caps in the power supply or else dry joints on the amplifier section. Faulty speakers or overdriving of the system may result in the amp going into protection. Good Luck, Jus004

Posted on Jan 05, 2008

Ad

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. Rebooting did the trick. Reboot the unit per the instructions provided by another user on the main page. Here they are:

To reboot, turn receiver off by the small on/off button, not the big standby button. While off press the night and pure direct button at the same time and keep holding them with your right hand while pressing the small on/off button with your left. You will see your receiver menu flash. When you see it flash let go of the night and pure direct button and the receiver will reset it self to the radio station 87.50. The receiver's microprocessor has now been set back to factory.

Posted on Jan 17, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is night and pure button?


'Night' compresses the audio's dynamic range to make soft sounds more audible and loud sounds less loud for a given volume setting. The assumption being that there are people sleeping while you're listening or there's so much environmental background noise that you won't hear the soft sounds. It sort of defeats the whole reason for having HIGH fidelity sound. Ditto for D.Comp.

'Pure' bypasses all internal analog processing (page 25). Why? Who can say? Other than to diagnose a problem. If the tone controls are contributing to the sound they don't belong in a Denon product to begin with. The implication is that to NOT use Pure or Direct is to inflict audible limitations on the sound. And you may lose control of the sub, too. Oh goody.

Register and download the manual for free at retrevo.com


http://www.retrevo.com/support/Denon-AVR-2807-Receivers-manual/id/363bh826/t/2/

Feb 26, 2011 | Denon AVR-2807 Receiver

1 Answer

My denon avr-2807 sound is studdering as the


sounds like a loose cable to me probably component. trace and replace.

Chris B
PHTBA

Feb 18, 2010 | Denon AVR-2807 Receiver

1 Answer

Receiver shuts off when trying to play a dvd in the dvd player.


Just a hunch - what's drawing power from the two convenience outlets on the back of the receiver. They're only rated for 120watts, that is, nothing like a TV.

I doubt this has anything to do with the source you're playing (unless you have it cranked to "11"). If I understand you correctly you said turning the TV on and off causes the problem. There's a clue.



Apr 07, 2009 | Denon AVR-1803 Receiver

1 Answer

Avr Shuts down at high volume


It does that because there is a safety feature in all the newer devices. If your system is turned up to high you would blow your audio outputs or speakers. That's why it shuts off.

Jan 17, 2009 | Denon AVR-3801 Receiver

1 Answer

Condition on HDMI input when Denon AVR-2807 switched off


hello if you know this spitter conduct voltage and its feed from main device and when you connect another it send it ground you have to do this chech with a voltmeter in the hdmi splitter output is not dc present if so change it cause is not blocking dc current saludos

Dec 04, 2008 | Denon AVR-2807 Receiver

1 Answer

Sound with HDMI but no video


the Denon does not pass 1080p change the output res from the DVD/PS3 or Xbox to 720p or 1080i will solve the problem

Nov 18, 2008 | Denon AVR-2807 Receiver

1 Answer

Denon AVR 2807 with Bose Acoustimass 15


Well,i can tell you are not very focus,cause you posted Denon AVR-2807 with Bose AC 15 problem,but under your details,you put down AVR-5807!
First of all,it is so unfortunate that you are NOT able to gain and experience to true ability in sound for this wonderful receiver when you are using a dual tweeters speakers and expect to have good sound separation as a TWO WAY speakers(a tweeter and a midrange-for true high frequency and mid frequency sound separation.)
Secondly,you have defeated the audio configuration of the Denon AVR-2807,since all your speakers are control BY the Bose subwoofer.
Now,i could show you a way to hook this up,and it doesn't matter how you connect them, they are the "bicycle tires" installed with a "Porche"engine if you know what i mean.
If you want a good recommendation for your "beast",i will more than happy to show you the way!
Cheers,
solutiondoct

Sep 28, 2008 | Denon AVR-2807 Receiver

1 Answer

DEnon AVR 2807 not giving desired output


You may be able to unplug the unit. Then turn it back on while pressing two buttons on the front of the unit. You will have to find out which two buttons they are, it can't just be any two. What you will be doing to the unit is resetting the micoprossing of the unit. When you do this the unit will flash, reset itself, you the release the buttons and your good as new. I have done this with a couple different reciever and it is a easy fix.

Jun 02, 2008 | Denon AVR-2807 Receiver

Not finding what you are looking for?
Denon AVR-2807 Receiver Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...