Question about Linksys Wireless-G Broadband Router
Hi there, you don't need to install from the disk. Make sure your modem connects to your router and then the computer's LAN port is connected to the LAN port of the router. Open internet explorer and in the address line type 192.168.1.1 this will connect you to the router's setup. On older Linksys routers the default username is blank and the default password is "admin." On
newer Linksys routers, both the default username and the default
password are set to "admin." You then can find the wireless setup to configure your router. Make sure if you use a WEP code you use the same code from your computer's wireless adaptor.
Posted on Nov 14, 2009
Is it a wireless computer or the wired computer?
I believe the main computer is online.
Check the settings on the router.
You will need to open the router set up page.
here you will see the settings of the router.
If you are trying to connect to the wireless
network then make sure that you are typing the
correct network key.
Click here for more information about routers and
Posted on Mar 13, 2010
Tips for a great answer:
Feb 15, 2011 | Linksys Wireless-G Broadband Router
Mar 17, 2010 | Linksys Wireless-G Broadband Router
Mar 09, 2010 | Linksys Wireless-G Broadband Router
Jun 04, 2009 | Computers & Internet
Nov 06, 2008 | Linksys Wireless-G Broadband Router
Jul 11, 2008 | Linksys Wireless-G Broadband Router
Jul 04, 2008 | Computers & Internet
May 20, 2008 | Linksys Wireless-G WRT54G Router
Apr 30, 2008 | Linksys WRT54GL Wireless-G 54Mbps...
Nov 09, 2007 | Linksys (WI-FI COMBO KIT)
841 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: