Question about Honeywell 5804 Ademco Wireless Security watch

2 Answers

ADEMCO alarm system indicates A/C not ready. What does it mean, how to fix it?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 10 Answers

Turn the alarm off two times. If it still indicates A/C not ready, press the * key and it will tell you what zone is open or what zone has a low battery.

Posted on Jan 19, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have a ademco 6128 key pad i was trying to change the code and now the alarm is arm and the code wont work can somebody HELP please,

Posted on Jul 20, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honeywell Ademco alarm panel reads Chime BAT 11


The answer above is incorrect. If the back up battery was low it says, "bat" on the screen and that's it. Since the "11" is being displayed, zone #11 on your wireless system as a low battery.

Jan 07, 2014 | Honeywell 5804 Ademco Wireless Security...

1 Answer

Monotronics alarm key pad beeps repeatedly and read bf check bat. What does this mean


"bf" stands for "Back up failure. Your system communication to the monitoring station is working on phone lines only if it's tied into them. I would call the monitoring station and see if it's still communicating.

Dec 28, 2012 | Honeywell 5804 Ademco Wireless Security...

1 Answer

Security code program for ademco alarm 6150


6150 is the type of keypad you have the alarm system itself. The 6150 works on a number of different Honeywell panels. You need to locate the main metal box and open it. There should be a white sticker on the board with the panel type. (Ex. v10,v20, Vista...)

Oct 21, 2011 | Honeywell 5804 Ademco Wireless Security...

1 Answer

Ac/lb light keeps flashing and home alarm beeps every 5 minutes or so and i cant get the light to go off


What model is your alarm system? The maker (Honeywell, Ademco, DSC, Napco, Caddx, ITI, GE, Moose, Morse, etc etc etc) and model number is usually inside the door of the control panel cabinet on a diagram. Numbers printed at the top of the control panel (NOT the keypad) circuit board is also helpful.

Sep 22, 2010 | Honeywell 5804 Ademco Wireless Security...

1 Answer

Honeywell Ademco alarm panel beeped repeatedly for about a minute and now reads, "Chime BAT." How do I fix this problem?


Find the metal box (usually beige) housing the control panel and open it. The system backup battery is inside. Take it to Battery Warehouse or similar store and buy a new one to replace it.

While you're inside the control box, read the model number of your control panel. That can be useful for future questions.

Sep 12, 2010 | Honeywell 5804 Ademco Wireless Security...

1 Answer

I need to turn off the alarm. I hit func/stay by mistake


without knowing the system type I can only guess. try entering 4 digit code then 1. if you don't know the code and have never really used system try 1234 then 1. this is assuming you have an ademco panel.

Apr 27, 2010 | Honeywell 5804 Ademco Wireless Security...

1 Answer

My lcd screen is blank and system doesn't respond to commands... Says ''not ready'' but that's it! There is power to the units but no response except a single beep after the pin and command is entered. It...


FYI 6150 is keypad model not alarm model. See if yhis helps. try pressing the " * " key bottom leftit thould then indicate zone trouble or fault. that sould give you at least some place to start.

Feb 07, 2010 | Honeywell 5804 Ademco Wireless Security...

2 Answers

Our Ademco 6160 PL3 alarm system keypad has an error message


It is located inside a tan colored metal box 12"wide by 15" tall and 4" deep; unless it is flush mounted, then only .5" deep. inside you will most likely find a 12 volt 4 or 5 or 7 amp hour battery. Note; the door may have a lock on it. I have found the key on top of the box, in the lock, and unlocked. The box could be located anywhere but, many times in closets, utility rooms, garages, crawl spaces, etc.

Nov 01, 2009 | Honeywell 5804 Ademco Wireless Security...

1 Answer

Ademco Alarm system won't set


Sounds like you need to reset the master code!

Depends on the version of panel you have... 13 years? could be a Vista-10 or 4110...

Either way, use the installing code to reset the master code. This information should be written down in the manual (as is customary upon installing the system for events like this). If the manual is lost, consult the internet for a copy (for your panel type and model) and try the factory default codes that are listed in that manual. If the "ready" light is on, and the keys "beep" when you press them then it should certainly work!

Another option would be to have a security technician come out and check it for you, but that would likely cost around $75 ($50 for first hour labor, and $25 for the trip fee), but you'll get fully informed of all of your options.

If your system is monitored then contact your monitoring company and they should be able to fix it for you for nearly nothing since you won't likely pay them the monthly fee unless you have a working system!

Another option would be to get monitoring for the system and the company will likely update the whole system to todays standards free of charge in exchange for gaining a new customer, but make sure you ask for new motion detectors, the old ones are a common cause of false alarms.


Good Luck!

Mar 05, 2009 | Honeywell 5804 Ademco Wireless Security...

Not finding what you are looking for?
Honeywell 5804 Ademco Wireless Security watch Logo

Related Topics:

2,771 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honeywell Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you a Honeywell Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...