Question about Hobart D300 Stand Mixer

3 Answers

Hobart d300 spins but slips under load - Hobart D300 Stand Mixer

Posted by on

  • traboH Mr
    traboH Mr May 11, 2010

    Does it slip in all 3 speeds?

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

The problems above, you guys need to open up the gear box and take out every gears and clutch to check, no other choice

Posted on Jun 24, 2010

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I don't have a solution, but a similar problem in my D340, but in my mixer the speed of the 3rd gear is slow - somewhere between speeds in gears 1 and 2.
how to fix it?

Posted on Jan 29, 2010

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 110 Answers

Sounds like you have a sheared key in one of the gears. which speed is it slipping in or is it all 3speeds

Posted on Jan 09, 2010

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i put back togeather Hobart 300-d mixer


http://www.hobartservice.com/Parts/

Go to this page and click on Hobart Smartparts System. Select Food Machines, Floor Mixers, D300 and you will eventually find parts breakdowns.

Feb 25, 2010 | Hobart D300 Stand Mixer

1 Answer

I am looking for Hobart D300 WORM part #00-070034. Where can I buy this in the USA?


any hobart office in your area should be able to help you . they can even drop-ship the part right to your location

Jan 12, 2010 | Hobart D300 Stand Mixer

1 Answer

Mixer goes off on overload protection when under a


This means that it is overheating, if there isnt to much mixture in the machine then the problem is in the motor. Depending on age and value of the mixer I would purchace another one as they are cheaper to buy. If it is still under warranty I suggest taking it back to the supplier that you bought it from. I hope thi is helpful.

Nov 04, 2009 | Hobart D300-6036 Mixer

1 Answer

3rd gear gets rough ...


The symptoms you are describing would lead me to believe that the shifter clutch sleeve (part # 70035-1) is worn out. There's a chance that the gear that engages the clutch is worn as well, but less likely. A significant amount of transmission disassembly is required to access and replace these particular parts. There are a lot of things that can go poorly if you don't pay attention to detail when disassembling/reassembeling the transmission of a D300 (ie clutch rollers and springs) On a brighter note, it's about a 90 minute job for a proficient technician, if everything goes his/her way. That money would be well spent.

Oct 02, 2009 | Hobart D300-6036 Mixer

1 Answer

Oil leaking from hobart d300 mixer


DEFINITELY contact the manufacturer (Hobart) on that one. Sounds like you're having some sort of an internal problem with it (something might be cracked), and in this situation, the best way to go is to contact the manufacturer rather than try to repair it yourself. If you're still under warranty, and you try to open the machine up to fix it yourself, you could wind up VOIDING the warranty, and if you're out of warranty, most repair places won't touch a machine that you've messed with already--too much of a liability.

Just give Hobart a call, and they should be able to help you (if you're in warranty, sometimes even for free!). Their phone number (according to their website, www.hobartcorp.com ) is 1-888-4HOBART (1-888-446-2278)


Good luck! :)

Aug 27, 2009 | Hobart D300 Stand Mixer

2 Answers

Hobart D300 Mixer, Will not shift from 2nd to 1st gear without coming to full stop, Ideas as to source of problem? It also seems to be making increased noise.


Hobart mixers are NOT designed to change gears while operating. The Hobart planetary gears are like the transmission in your car but, without the clutch. Everytime you change gears while unit is running you are tearing up the brass spacers, gears & seals. Time to call a QUALIFIED service tech to come out & sell you another planetary or rebuild your old one, about $2K, Buy a Varimixer if you want to change gears while unit is running, they use belts. Another planetary premature failur cause, over loading the bowl. Batters & icings- 75% bowl capacity, Dough 65% bowl capacity.

Jul 23, 2009 | Hobart D300 Stand Mixer

1 Answer

New bowl & hook hobart d300


There is a website called onesharpstore.com, It carries parts for the hobart 30 quart mixer. I specifically saw the bowl and hook attachments as well as others like beaters and a cheese and vegetable grater. Hope this helps. And if you sign up I think you can even request a full catalog for your machine.

Feb 25, 2009 | Hobart D300 Stand Mixer

1 Answer

Problem with the 3rd gear on Hobart D300


Hobart won't give up service manuals The slide for your shift fork may be froze or corroded at top. The gear setups are fairly simple. The mainshaft nut comes off counterclockwise. The top gear has one way rollers with shims under the large washer. This gear assy must go back in the right way or you will break gears as soon as you start it.These mixers corode a lot at the top gearbox when they sit idle from moisture. Also check for broken gear teeth that may be jaming up he works. If you want to sell it let us know.
Dave at machinerysurplus@yahoo.com

Dec 11, 2008 | Hobart D300 Stand Mixer

3 Answers

Hobart d-300 mixer


To Whom it May Concer: At the school I work we have a Hobart D-300 Mixer. When we mix bread dough it pulls alot of current and trips the breaker. The max current draw on the name plate is 10.1 amps. I have seen the current go over 30 amps during the mixing process. Under no load the mixer pulls 7.8 amps. I dont have any information about this machine on paper and I can only go so far with troubleshooting.
My questions to you are: Is it normal for the mixer to draw 7.8 amps under no load? And is their a manual online I can look at so I can check the oil levels and make sure I do not have a low oil/needs greasing condition.
Thanks for your help and time,
Kenneth Clayton
Spartanburg Schools Dist#2

Apr 16, 2008 | Hobart D300 Stand Mixer

3 Answers

Hobart d300


http://www.food-equipment.com/parts_Hobart_mixers.htm About halfway down. Hope this helps :)

Aug 01, 2007 | Hobart D300 Stand Mixer

Not finding what you are looking for?
Hobart D300 Stand Mixer Logo

Related Topics:

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1361 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...