Question about Regal Ware GL2850 Bread Maker

1 Answer

Need drive belt for this where would I order this from

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Try Solent Tools on 023 80578057 or email them

They will try and match any belt.

Posted on Mar 17, 2010


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I take out the power steering ump to replace a serpantine belt in a 98 buick park ave?

Vin K or Vin 1 ?
Removal Procedure
The accessory drive belt drives all engine mounted accessories. All driven accessories are rigidly mounted to the engine. Drive belt tension is maintained by a spring loaded belt tensioner. A belt squeak when the engine is started or stopped is normal and has no effect on belt durability. The drive belt tensioner can control belt tension over a broad range of belt lengths; however, there are limits to the tensioner's ability to compensate. Using the tensioner outside of its operating range can result in poor tension control and/or damage to the tensioner.
Important: Ensure that the wood block extends past the width of the oil pan in order to avoid damage.
  1. Use a jack with a block of wood on the jack under the oil pan in order to support the engine.
  2. Remove the engine mount to engine mount bracket nuts.
  3. Remove the engine mount bracket front upper and lower nuts.

Remove the engine mount bracket front upper and lower studs and spacer.
Lower the engine as necessary and rotate the tensioner to remove the drive belt.
Remove the drive belt.
Don't need to remove power steering pump if done right !

Oct 18, 2016 | 1998 Buick Park Avenue

1 Answer


Typically when I need belts for the service business I operate and the unit is a bit strange or esoteric, I send an E mail to Fred Marrs and he comes up with the kit I need. It may not be the cheapest option but it take all the work out of your part of it. If you want to research the belts and order then individually you can save some money but there might be a lot of work involved.
Email is

May 02, 2013 | Sony CASSETTE DECK Single Dual Cassette...

1 Answer

Need drive belt fisher cr-125 cassete deck

You van measure and order a 5% smaller belt from MCM Electronics OR just contact Marrs Belts and have his sell you the kit for the unit you have.

I am not associated with Fred at Marrs but he does a good job of delivering the product.

Dec 29, 2012 | Audio Players & Recorders

1 Answer

How to change drive belt-Ariens 522 snowblower-model # 938017


Which belt? You are referring to the auger drive right? The self propell uses a friction disc drive.

The auger drive has two belts, and in order to replace them you need to seperate the auger from the engine (split) the blower.

Happy days.


If you need further help, I’m available over the phone at

Dec 13, 2010 | Garden

1 Answer

My pro form 380 stops while I am walking

Either the walk belt is loose or the front roller pully has spun. In order to determine which one, you need to remove the moter cover and watch the drive belt and front roller while you walk, try to stop the belt and see which one stops. If the walk belt stops and the front drive roller keeps turning, then you need to put a couple of turns on the rear allen bolts. If the roller stops when the walk belt stops, see if the drive belt(small one going to the motor) stops as well. If the drive belt turns fine,but the walk belt and the front roller stop, you need to replace the front roller, because the plastic pully that is connected to the roller, is pressed on and cannot be tightened.

Hope this helps

If you need further help, I’m available over the phone at

Nov 10, 2010 | Proform 380 Treadmill Walking Belt

1 Answer

Worn Drive Belt

no..the belt should go around the fan

Feb 19, 2010 | 1999 Toyota 4Runner

1 Answer

My murray 16.5 42' will not go in gear. what to do

If this is an older mower it will most likely have to do with the linkage, it is worn and will create some problems for it to go into any gear. I just had the same problem with mine. If you are able to move the gear shift but the mower is not moving you will need to replace the drive belt. In order to do this you will need to drop the mowing deck to replace the drive belt. If possible you will need another person to assist you in order to speed things up. If not it will take a couple of hours by your self.

First put it in first or second gear and check the tension on the drive belt. If it is loose this will be the tell all sign that the drive belt will need to be replaced before the mower will move. However, most importantly check the adjustment for the tension on the belt. If it is not already adjusted all the way you can adjust it to put more tension on the drive belt allowing it to move again without the hassle of replacing the drive belt. If this does not work do the following.

Check your linkage where it goes to the top of the rearend and see if it is moving at this location. If it is not moving the lever at the top of the rearend you will need to replace the linkage in order for it to work;.

I was lucky with mine. Once, I replaced the drive belt it started working. I had no reverse.

Aug 22, 2009 | Garden

1 Answer

Where to order Drive Belt 126134

You can order from us at

Do you also need installation? Let us know!

Aug 18, 2009 | Nordic Track /proform Treadmill Drive Belt...

1 Answer

How to change engine belts on a jaguar x-type 2003 3.0

To Remove BELTS : Drive Belt :
Disconnect battery ground cable
Remove wheel and tire
Detach accessory drive belt
detention drive belt
detach accessory drive belt
Remove accessory drive belt
slacken the tensioner
remove accessory belt drive

Install in reverse order
WATER PUMP BELT : Remove battery tray
Remove water pump belt
De-tension water pump belt
Remove water pump belt

Installation in reverse
Hope this is helpfull

Jul 11, 2009 | 2003 Jaguar X-Type

Not finding what you are looking for?
Regal Ware GL2850 Bread Maker Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Regal Ware Kitchen Appliances - Others Experts

Irene Tulloch

Level 2 Expert

498 Answers


Level 3 Expert

13434 Answers


Level 3 Expert

85222 Answers

Are you a Regal Ware Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides