Question about Noritz 6.3 Gallon Residential Tankless Water Heater - N-063S

1 Answer

Error code 14 shows on the remote for a noritz tankless lpg water heater. what does it mean?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

This means the thermal fuse has broken and needs replacement. The thermal fuse is a white cord which wraps around the heat exchanger. It typically breaks if the unit is excessively dirty and sooted. Before the fuse is replaced you should make sure the unit is cleaned with compressed air and descaled.

Posted on Jul 15, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Noritz tankless water heater (model n-132m). I am getting an error code of 71. What does that mean?


The Noritz Manual shows fixed for the following error codes:
11
21
90
99
For all other codes this is the recommendation:
Contact our sales agent if:
• Any other error code appears.

Sep 12, 2014 | Noritz Commerical Tankless Water Heater...

1 Answer

Error code 43 on 8.4 noritz


You know, either it's tankless or it's 8.4gal but it can't be both. Does that figure mean 8.4gal/minute at a certain flow rate and temperature?

Sep 04, 2014 | Noritz 8.4 Gallon Residential Direct Vent...

2 Answers

What is code blinking 20 on noritz tankless hotwater heater N_069M


The error is a HIGH LIMIT THERMAL ERROR. That means Calcium buildup has appeared in the unit. It is also called scale. To clear the error you have to power it off. That is done by the circuit breakers. You should descale the unit first though.

Jul 26, 2014 | Noritz Water Heaters

1 Answer

Code 125 on my Noritz tankless water heater


Call noritz
(866) 766-7489
http://www.noritz.com/contact-us/

Don't buy a tankless water heater.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Oct 01, 2012 | Noritz 13.2 Gallon Residential Tankless...

1 Answer

What is error code 043 on NORITZ tankless heater?


There is no error 43 on a NR71. There is a 73 error code which is caused by disconnecting jumper cables while the power is on.

Oct 29, 2010 | Noritz 7.1 Gpm Propane Lp Gas Tankless Hot...

1 Answer

What does F-76 code mean on a Noritz M-069 panel


F76 is a communication error. It usually occurs if you connect or disconnect a quick connect cable or remote control when the tankless heater is connected to electricity. (If you have a quick connect system, make sure you only have 1 remote and 1 quick connect cable.) To get rid of the code, try disconnecting electricity for 20 seconds, reconnecting electricity, and turning the remote on. If the code returns, you may need to replace your quick connect cable, remote cable, or even remote control

Sep 14, 2010 | Noritz 6.9 Gallon Residential Tankless...

1 Answer

Getting error code 16. what does it mean and what


a 16 error code is typically caused by scale formation. I'd recommend performing a descale on the heater.

Mar 06, 2010 | Noritz 6.9 Gallon Residential Direct Vent...

2 Answers

Water does notget hot enough


Hi,
Have you tried to turn to temperature up higher? The units come factor set at a low water temperature and usually need to be adjusted higher after installation.

Down load this manual and follow the instructions on pages 11 or 12 depending on whether or not you have a remote control. My gues is that you do not have the remote.

http://www.noritz.com/u/products_files/owner_s_guide__n_0531s_0631s_series.pdf

I hope that this will help you to solve your problem!

Thanks for using Fixya!!

Heatman101

Dec 08, 2009 | Noritz 6.3 Gallon Residential Tankless...

2 Answers

Noritz Tankless error code 16


The trick with these hot water heaters is to keep the filter screen clean and flush the system with CLR periodically. Code 11 is ignition error. Is your gas valve turned on?

Oct 17, 2009 | Noritz 6.9 Gallon Residential Direct Vent...

2 Answers

Noritz tankless water heater not producing hot water


I called Noritz error code 16 is a overheat problem. Noritz say's to flush your coil with vinegar or CLR.
Use a small pump to recirculate the CLR or vinegar through the system for 45 minutes and flush with fresh water. This worked for me.

Jan 04, 2009 | Noritz 6.9 Gallon Residential Direct Vent...

Not finding what you are looking for?
Noritz 6.3 Gallon Residential Tankless Water Heater - N-063S Logo

5,584 people viewed this question

Ask a Question

Usually answered in minutes!

Top Noritz Water Heaters Experts

Fahr Quad

Level 3 Expert

752 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

AndySmith70

Level 1 Expert

8 Answers

Are you a Noritz Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...