Question about Cooktops

3 Answers

Whirlpool induction ceramic cooktop error E6

My whirlpool induction ceramic cooktop is showing an error code E6 on two of the elements...what is the problem and how do I get it fixed

Posted by on

  • Anonymous Mar 12, 2014

    Error message is F47

  • Anonymous Mar 21, 2014

    My induction cooktop shows E6 error after running for hardly 5 mins. What might be thereason behind this and kindly provide me the solution too.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My induction ceramic cooktop is showing an error code E6 on two of the elements...what is the problem and how do I get it fixed

Posted on Dec 21, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

E6 - Internal Electronic Temperature is higher than normal for 3 seconds
Contact technical support.Source: http://techmindviews.blogspot.com/2011/10/induction-cooker-not-working-error-code.html

Posted on Dec 03, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I had the same problem on my electrolux induction cooktop
pulled it apart has three circuitboards one where the power goes in
has capasitors looks like little cans if they are misshaped or leaking
bouhgt two new ones from jcar took the board to them to confirm
4 dollars solderd them on myself make sure you have negative
posative right presto everything fine

Posted on Oct 07, 2015

  • Anonymous Dec 17, 2016

    Same remedy for my Omega with error E6.

×

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Bellini 2 zone ceramic cooktop. With a copper based pot on top of one of the cooktops, it is only showing Lo and can't increase the heat. How can I make this work?


If it is an induction cooktop, some pots wont heat properly. I believe that they have to be all steel pots to work on an induction type.

Oct 01, 2018 | Cooktops

1 Answer

Please can you tell me how do I solve e6 in my bush induction cooker ? 2 of the hobs are ok the other two keep flashing e6


Try resetting the cooker by disconnecting power for 1 minute to clear the error code. When you reconnect power and it does not clear the error, please consult a repairman.

Sep 16, 2018 | Cooktops

1 Answer

Induction cooker are display E6 error


I did exactly the same thing as "Carol Johansson" did to fix her "Electrolux" induction cooktop.
My "Omega" induction cooktop was intermittently (more often than not) coming up with error E6 problems on two of the four elements, after a power reset it started to do it on all 4 elements.(Now the Boss was not happy)
I pulled it all apart taking photos of every stage of dismantling, makes it a lot easier to put it all back together.
The main power supply board which supplies the other two boards has about six electrolytic capacitors, two of them where bulging, (curved on the top instead of being flat). They where the 470uF 25V ones, I replaced them with 470uF 35V ones from Jaycar for $2.80.
Put it all back together and we can eat tonight, Boss is happy!!
Hope this helps and thanks to Carol for pointing me in the right direction.

May 11, 2016 | Cooktops

1 Answer

I have an EKI 807.2 Glass hob. I can't turn the heat up on more than one ring without E flashing on all the Rings followed by 6


Are you sure it is properly wired? For 1 phase 230v:

1= power earth
2-3 intersected = N
4-5-6 are L1-L2-L3 that should be conected together to L

Kuppersbusch is not very cooperative about what their error codes indicate, but E6 seems to be a (low) voltage issue, so you might too check the cabling to the outlet, measure the voltage with a multimeter when you successively switch on elements

Dec 22, 2015 | Kuppersbusch Glass ceramic induction hob...

1 Answer

Prestige induction cooktop showing error E4


Good Afternoon friend, I appreciate your inquiry!

Typically on an Electrolux induction cooktop the "E4" error code stands for key sensor for timer. Which means you could be experiencing an issue with the right board, center board, or left board. I would perform a reset on your cooktop and you can do that by flipping the household circuit breaker off for ten minutes.

If that does not assist with clearing any false error codes or the error "E4" continues to display I would suggest seeking assistance from a professional for proper diagnosis and repair. Hopefully this helps. -Matt

Oct 18, 2014 | Electrolux 36" Electric Hybrid Induction...

1 Answer

Telefunken spare parts australia


Try turning off the power for a short while to allow the p c board to re set itself turn it back on and individually turn on each elements for a few minutes. Good luck
Ray

Apr 16, 2014 | Kuppersbusch Glass ceramic induction hob...

1 Answer

Induction error e6


Hello it07002 - You may try and reset the induction cook top by disconnecting the power to the unit for up to 30 seconds by flipping the circuit breaker off and back on. This often clears most false error codes. If the error code does not clear, then the unit more than likely may be experiencing an issue with the EOC (Electronic Oven Control) and/or user interface board. This is not a typical do it yourself job; please consult a professional or your manufacturer.

May 07, 2013 | Electrolux 36" Electric Hybrid Induction...

1 Answer

Whirlpool schott ceran induction plate doesn't get hot


magnetic gradeI have a SCHOTT Ceran glass ceramic cooktop as well, and soon realized that induction cooktops like this require that your metal cookware be in contact with the surface for them to heat up. Best cookware:
  • Cast iron pans
  • Any black metal pans
  • Stainless steel pans, if base is magnetic grade (magnet sticks to bottom)


Read more: http://www.us.schott.com/hometech/english/products/ceran/dailyuse/index.html

Jul 15, 2012 | Whirlpool 30-inch Electric Ceramic Glass...

Not finding what you are looking for?
Cooktops Logo

Related Topics:

8,130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cooktops Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Paul Carew

Level 3 Expert

3480 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...