Question about Hobart H600 Stand Mixer

2 Answers

How old is my H660T mixer

How old is my mixer Serial # 11-1022852 , Its A H660T

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 110 Answers

This mixer came out of a pizza hut in illnois, looks like the manufacture date is june 1994, dont forget to vote, hope this helps, monomoy

Posted on Jan 18, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 9 Answers

Hi Monomoy,
looks like you are familiar with all those Hobart mixers. Hope you can help me too.
So I have a HL600. Got it from a school. Was working prior to remove from the school facility.
A month later plugged it in. Worked for like 20 min and stopped.
Bowl still goes up and down but there is no lights on the display.
And mixer wont start at all. Called Hobart. They sent out a tech. He checked the mixer and said all is good with it just the control panel board is bad. Ok So I got another board. Same thing. Mixer worked like 20 min and stopped. All the same sypthoms. Now since the tech said its the board thought OK. Let's put another board on it. And same thing happened again. Mixer stopped, lights disapeared.
Now we have 3 mixers and 3 bad boards I guess.
But I don't think the board is the problem anymore. What's the chance that working machine when I take out the board and put it on another unit it won't work.
The problem must be something else.
Please let me know if you have any ideas how to get them back working.

Much appreciated.
Regards Stoyan

Posted on Oct 18, 2019

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hobart A-200T mixer. What what gear grease and how much to use for the transmission gears? Serial #11-44-651, ML #38907


what ever the grease is used it must be food grade grease
even though the mixer is old, the grease and oils will still be the same and may even be better than original specs
what is more important is the replacement of the shaft seals to prevent lubricant leakage

Aug 09, 2018 | Hobart Food Mixers

1 Answer

HOW OLD IS MY MIXER


The Hobart A-200 is an 80's product. These first came on the market around 1985. There is no way to date the one you have without examining it.

The best estimate is 25-30 years old.

Sep 22, 2015 | Hobart A200 Stand Mixer

1 Answer

Where do you find the serial number for a 5 quart glas bowl for the Artisan mixer


The serial number for all KitchenAid mixers is located under the base of the mixer. You will need to carefully tilt the mixer over, and underneath the mixer you will find a label with the model number and serial number.

Feb 16, 2013 | Kitchenaid 5 Quart Glass Bowl Artisan...

1 Answer

I have model A-200-D Hobart mixer. Serial # 1575984. It is leaking oil into the bowl. Who can I call to get an estimate to service or repair this machine?


The oil leeking into your bowl is old grease that has broken down into oil and is getting past your oil seal you need to take out all of your old grease and oil replace it with hi-temp grease or a good grade lithium grease and replace your agitor shaft oil seal

May 16, 2010 | Food Mixers

1 Answer

Bowl lift on H660T will not raise bowl. The pinion gear turns the threaded rod, however; the screw just turns in the threaded block on the bowl yolk, without raising the bowl


The brass nut threads are worn.You have to remove the bowl yolk from the slides to get to the nut.I'm a hobart tech and repair these units often,any questions let me know----Tony.

Nov 23, 2009 | Hobart Food Mixers

2 Answers

Age of my a-200 mixer


if it has a spec.# instead of a ml.#it would have to be at least 25-30 yrs. old

Jul 04, 2009 | Hobart A200 Stand Mixer

1 Answer

Hobart A-200 mixer (OLD!) runs hot & shuts down.


You have killed it by overloading the bowl. Hobart recomends no more than 65% bowl capacity on doughs & 75% on batters or icings. Replace the motor or the whole unit

May 25, 2009 | Hobart A200 Stand Mixer

1 Answer

Service manual for hobart mixer s301


Give me the serial number,also hobart does'nt release their service manuals to the general public.However if you goto hobartcorp.com type in your model which is a d300 and you can access an exploded view of the parts.I work for hobart and service these mixers often.Any questions let me know.

Mar 29, 2009 | Food Mixers

Not finding what you are looking for?
Hobart H600 Stand Mixer Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...