Question about Zojirushi NS-MYC10 Neuro Fuzzy 5-Cup Rice Cooker

2 Answers

My ricemaker is refusing to work and showing a h02 code. any ideas?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 2 Answers

According to the manual:

Cause: Interior High temperature

Action: The lid sensor or central sensor temperature is too high. Wait till the unit cools down as the unit can not cook the rice properly in this condition.

Posted on Feb 15, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

The answer above does not apply to me, as the H 02 code shows all the time, even when the unit has been sitting unplugged for weeks. Maybe bad sensor? I think I have to toss this one.

Posted on Oct 10, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why the Panasonic Washing Machines error code "h 02" displaying?


Google "panasonic washing machine error codes"

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Jun 11, 2016 | Washing Machines

2 Answers

Panasonic Model No. DMR-ES35V DVD Recorder error message H02


Hello,

check it out this link, maybe can help you https://www.ifixit.com/Guide/Repairing+a+Panasonic+SA-HT810V+with+the+H02-H07+error/2708

Try to clean reading head from vhs player with isopropilic alcohol, maybe is dirt and give this error.

Good luck !

Dec 03, 2017 | Panasonic Dmr-es35vs DVD Recorder / Vcr...

4 Answers

ERROR CODE H02 ON MY HOOVER SENSOR DRY WASHER DRYER WD9616C


Hi I have the error code ho2 on my Hoover wash machine does any one no what it means
2_17_2016_8_33_25_am.jpeg

Oct 21, 2012 | Washing Machines

1 Answer

Dvd will not play. H02 appears. Have reset to no


H02 is a fault code, though I don't know what. It code be either an electrical fault or mechanical problem. A mechanical fault might be easy to spot so take off the top cover and see if anything is broken, otherwise I suggest a service manual will come in handy.

May 21, 2010 | Denon DVD-800 DVD Player

1 Answer

H02 code after inserting DVD


Hi,the spindle motor on the traverse deck of the laser is faulty.Replace it and the machine will function again.

Aug 14, 2009 | Panasonic Televison & Video

1 Answer

Code H02


Your DVD player is having an issue with the spindle motor (the thing that spins the DVD around). The following solution works for most people, and you should only have to do this once.

  1. Unplug the DVD player.
  2. Take the cover off.
  3. Place a disc on the spindle.
  4. Put a little pressure on the disc (so it doesn't slip) and spin it around a few times.
  5. Remove the disc, reassemble, and plug back in.
  6. Try to play a DVD.
  7. Report back if this solved your problem, or if more troubleshooting is needed.

Aug 02, 2009 | Panasonic DVD-S55 DVD Player

1 Answer

I keep getting error code H02 after cd is in machine


Remove the cover from the player, usually a few screws on the sides and back. You will see the changer and the drive at the back (Panasonic SC-PT750). Start the play sequence and while it is attempting to read, gently start the the disk spinning near the center in a clockwise direction with your fingertip. The motor should kick in at this point. Others out there (and me) have left the cover screws out, as it will not be the last time you have to do this most likely!

Nov 20, 2008 | Panasonic Audio Players & Recorders

1 Answer

Technics sc-dv290


i once had a panasonic dvd player which displayed the same code H02 and used the same drive mechanism as your player. this turned out to be a worn spindle motor and once replaced, all worked fine. you may well have the same fault. hope this helps?

Oct 26, 2008 | Technics SC-DV290 System

1 Answer

H02 Error after inserting a dvd disk


The trouble started with an error to close and open the DVD drawer. It indicated "close" when the drawer was open, or "no disc" when the DVD was inside, and I had to try many times before I get the right response and go on with the procedures.
But then it also started playing just a few MP3 tracks and stopping to work, showing again the inserted DVD data. Later H02, and then H07 and STOP. It doesn't even start playing stuffs, movies or MP3 tracks!

Aug 11, 2008 | Panasonic Televison & Video

2 Answers

DVD-RV31 with H02 code


The Spindle motor is defective.

Feb 08, 2008 | Panasonic DVD-RV31 DVD Player

Not finding what you are looking for?
Zojirushi NS-MYC10 Neuro Fuzzy 5-Cup Rice Cooker Logo

Related Topics:

18,349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zojirushi Kitchen Appliances - Others Experts

Irene Tulloch

Level 2 Expert

498 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Zojirushi Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...