Question about Hitachi Video Cameras

1 Answer

I received an error message ''Error occurred. Please replace disc.' How do I get my data from my disc without damaging it, or what can I do to make sure I get what I recorded? Is there anything I can do??? Help!

Posted by on

  • 1 more comment 
  • tirwin Dec 28, 2009

    So if I take the disc out of the camcorder to do this I won't damage it further? Thanks

  • tirwin Dec 28, 2009

    Also, does it matter the type of disc I used?

  • tirwin Dec 28, 2009

    Yes, thanks.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. As the Disc has gone corrupted due to non-finalizing of the Data you can try and use it on another Camcorder and finish it on the PC through USB by using Nero, Roxio or any other data recovery software. Once finished you can copy it on DVD and recover it. If it does not resolve the issue, then you’ll need to buy a data recovery package to recover the data from the corrupted disc. They will charge around $19.99 for 30 day license, and $34.99 for full license. Some of these websites are given below---


Hitachi Data Recovery and File Transfer


Camcorder Data Recovery


CD Roller Data Recovery


CnW Recovery Software


Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks


Rylee

Posted on Dec 28, 2009

  • Rylee Smith
    Rylee Smith Dec 28, 2009


    It will not damage it further and it does not matter what type of disc you are using.
    Please do accept the solution if the issue is resolved or else revert for further assistance.

    Thanks


    Rylee







×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 2881


Hi,


Found error in image file, Error Occurred, error 0901, 572, 2881
The camera says found error in image file, repair data now. When you press yes it says "Error occurred. Please replace disc." or use ac adapter/charger, turn off power. It won't let you go to Disc Navigation to finalize it. While recording video on DVD-R media the battery power may have failed and camera shut off. When turned on the message shown on the lcd is Found error in image file, Error Occurred, error 0901.



Regards.

Jan 12, 2011 | Hitachi DZ-MV580E DVD Camcorder

Tip

When you try to play a DVD game on Xbox 360 it tries to play as a movie?


c on your Xbox 360 console, you may receive an error message. This article presents step-by-step guidance to help you determine whether your disc is playable.
SYMPTOMS When you try to play a disc, you may receive the following error message: Can’t read this DVD.
CAUSE The DVD or game disc may be dirty or damaged. Because the console cannot read the disc well, it may even mistake a game disc for a DVD and report this error. If this problem occurs with multiple discs, even clean and undamaged discs, there may be a problem with your Xbox 360 console.
Note If you receive a different error message, such as one of the following messages, the problem is a different problem:
Error message 1 Can't play DVD. Wrong region code. Error message 2 Can’t play DVD. Family settings restrict playback of this DVD. If you receive one of these error messages, see the corresponding Knowledge Base article: 907620 While attempting to play a standard DVD movie using your Xbox 360 console, you receive the error message: "Can't play DVD. Wrong region code" 908645 While attempting to play a DVD movie using your Xbox 360 console, you receive the error message: "Can’t play DVD. Family settings restrict playback of this DVD"
THINGS TO TRY Here are some things that you can do to try to fix the problem or to determine what caused it.
Determine whether the disc is dirty or damaged Discs that are smudged, scratched, or otherwise damaged cannot be read by the Xbox 360 console. You will want to examine the disc to see whether it has smudges, scratches, or other damage. To do this, follow these steps: 1. Examine the disc for dirt or damage: a. Pick up the disc by its edges. Do not touch the top or bottom surface. b. Examine the shiny side of the disc to make sure that the disc is clean and has no damage.
NoteScratches that follow the curve of the disc are very damaging and prevent a disc from being read. If your disc has even one of these kinds of scratches, the disc is damaged, and you will no longer be able to play it. If this is the case, see step 4. 2. If the disc is dirty, clean the disc by hand: • Use a soft, clean, dry, chemical-free cloth to clean the disc. • Lightly wipe from the center of the disc outward. 3. After you clean the disc, try to load it in the Xbox 360 console. If the disc still will not load or you receive the same error message, the disc is damaged, and you will no longer be able to play it. If this is the case, see step 4. 4. If the disc is damaged, do one of the following: • Because DVD discs are not game discs and the disc was damaged because of misuse of some type, such as not storing the disc in its case, the only thing that you can do is buy a new one. • If you feel that the disc was damaged by the Xbox 360 console in some way, please contact Xbox Customer Support. To do this, please visit the following Microsoft Web site: http://www.xbox.com/support/contact

on Feb 18, 2010 | Video Game Consoles & Games

1 Answer

When i turn on my gamecube it says an error has occurred and to shut it off and check the instruction booklet for further instructions


  • An Error has occurred:
    If you are getting the specific message, "An error has occurred. Turn the Power Off and check the Nintendo GameCube Instruction Booklet for further instructions." This means there may be an internal problem with the system.
    1. Check Individual Game Disc problems or Multiple Game Disc problems (depending upon how many games exhibit the problem) to see if the cause of the message is a dirty or damaged disc.
    2. If the disc appears fine or works properly in another system, this means there is an internal problem with the system. A repair will need to be set up. Please use our convenient repair options.

  • Nov 01, 2010 | Nintendo GameCube Console

    1 Answer

    My gamecube freezes in the middle of a game and says an error has occured, it tells me to check the gamecube manual but i don't have one! PLEASE HELP!


  • An Error has occurred:
    If you are getting the specific message, "An error has occurred. Turn the Power Off and check the Nintendo GameCube Instruction Booklet for further instructions." This means there may be an internal problem with the system.
    1. Check Individual Game Disc problems or Multiple Game Disc problems (depending upon how many games exhibit the problem) to see if the cause of the message is a dirty or damaged disc.
    2. If the disc appears fine or works properly in another system, this means there is an internal problem with the system. A repair will need to be set up. Please use our convenient repair options.

  • Aug 03, 2010 | Nintendo GameCube Console

    1 Answer

    When i put an Xbox 360 game in it tries to play it as a DVD movie. please help!!!


    When you try to play a DVD movie or an Xbox 360 game disc on your Xbox 360 console, you may receive an error message. This article presents step-by-step guidance to help you determine whether your disc is playable.
    SYMPTOMS When you try to play a disc, you may receive the following error message: Can’t read this DVD.
    CAUSE The DVD or game disc may be dirty or damaged. Because the console cannot read the disc well, it may even mistake a game disc for a DVD and report this error. If this problem occurs with multiple discs, even clean and undamaged discs, there may be a problem with your Xbox 360 console.
    Note If you receive a different error message, such as one of the following messages, the problem is a different problem:
    Error message 1 Can't play DVD. Wrong region code. Error message 2 Can’t play DVD. Family settings restrict playback of this DVD. If you receive one of these error messages, see the corresponding Knowledge Base article: 907620 While attempting to play a standard DVD movie using your Xbox 360 console, you receive the error message: "Can't play DVD. Wrong region code" 908645 While attempting to play a DVD movie using your Xbox 360 console, you receive the error message: "Can’t play DVD. Family settings restrict playback of this DVD"

    THINGS TO TRY Here are some things that you can do to try to fix the problem or to determine what caused it.

    Determine whether the disc is dirty or damaged Discs that are smudged, scratched, or otherwise damaged cannot be read by the Xbox 360 console. You will want to examine the disc to see whether it has smudges, scratches, or other damage. To do this, follow these steps: 1. Examine the disc for dirt or damage: a. Pick up the disc by its edges. Do not touch the top or bottom surface. b. Examine the shiny side of the disc to make sure that the disc is clean and has no damage.
    NoteScratches that follow the curve of the disc are very damaging and prevent a disc from being read. If your disc has even one of these kinds of scratches, the disc is damaged, and you will no longer be able to play it. If this is the case, see step 4. 2. If the disc is dirty, clean the disc by hand: • Use a soft, clean, dry, chemical-free cloth to clean the disc. • Lightly wipe from the center of the disc outward. 3. After you clean the disc, try to load it in the Xbox 360 console. If the disc still will not load or you receive the same error message, the disc is damaged, and you will no longer be able to play it. If this is the case, see step 4. 4. If the disc is damaged, do one of the following: • Because DVD discs are not game discs and the disc was damaged because of misuse of some type, such as not storing the disc in its case, the only thing that you can do is buy a new one. • If you feel that the disc was damaged by the Xbox 360 console in some way, please contact Xbox Customer Support. To do this, please visit the following Microsoft Web site: http://www.xbox.com/support/contact

    Feb 18, 2010 | Microsoft Xbox 360 Console

    1 Answer

    Computer does not recognize it as a CD RW drive


    When you try to write data to an optical disc, you may experience any of the following symptoms:

    * You receive various disc write error messages.
    * You experience issues with the drive and the built-in recording feature of Windows XP.
    * You experience issues with third-party programs that you use to write data to the disc.
    * You cannot read the disc in all versions of Windows.
    * You cannot read the disc, or some files on the disk, by using an MP3 player.
    * When you add files or folders to a disc that already contains data, some files are lost.
    * Recording files to the disc is inconsistent.
    * The disc recording operation is consistently unsuccessful.

    TROUBLESHOOTING

    Troubleshooting specific errors
    If you experience one of the following errors, follow the appropriate steps to resolve the error.

    * There is no disc in the drive. Please insert a writable CD into drive.
    This error can occur if the CD-R drive or CD-RW drive is not recognized as a recordable device. This error can also occur if the device driver has been corrupted. To resolve this issue, see Method 3 in the "General troubleshooting" section and Method 1 in the "Advanced troubleshooting" section.

    * Drive not accessible, incorrect function
    This error message typically occurs when you try to write to a CD-R or a CD-RW, and the Windows XP built-in disc recording feature does not recognize the CD drive as a recordable drive. This error message may also occur if specific third-party programs are installed. For more information about how to troubleshoot this error,

    when you access the CD-ROM drive, the DVD-ROM drive, or the CD-RW drive
    * Error Deleting File or Folder.
    Cannot delete file name. Files on this CD-ROM drive are read-only. You cannot copy or move files over to this CD-ROM drive.

    This error message can occur because individual files cannot be deleted from the CD-RW. You cannot use the CD disc recording feature of Windows XP for random-access storage while you are writing to disc.

    To set the service to Automatic, follow these steps:
    1. Click Start, click Run, type services.msc /s, and then click OK.
    2. Double-click IMAPI CD-Burning COM Service.
    3. Under Service Status, click Start.
    4. Try to write data to a CD.

    Jan 28, 2010 | Samsung (SH-M522C/BEBN) CD-RW/DVD-ROM...

    1 Answer

    Turbotax 2008


    Hello There, I found this in their FAQ Guide. Hope this resolves your problems, I know it is a bit of a read. Good Luck!!

    What is happening?

    Double-clicking on a backup, portable company file, or a file with an extension other than .qbw, the following error occurs:
    An error occurred when QuickBooks tried to create, open, or use the company file. Please try again. If the problem persists, contact Intuit Technical Support and provide them with the following error codes: (-6150,-1006).
    Or, if you attempt to double-click the data file without QuickBooks open, the following error occurs:
    There was an unexpected error reported while trying to run QuickBooks with company file "path location". Error code 80070057.
    Note: More than one error message that includes the error code 80070057 exists. If this is not the exact wording of your error message please refer to one of these other documents:
    Error: 80070057 parameter is incorrect" when clicking on a QBB, QBM, QBW, NT, or TLG file from a Google Search Timeline
    Error: 80070057 parameter is incorrect" when clicking on a QBB, QBM, NT, or TLG file from a Google Search Timeline
    Error: 80070057, the parameter is incorrect. There was an unexpected error reported while trying to run QuickBooks with company file [path and name]
    Error: 80070057 the parameter is incorrect" and "You do not have sufficient permissions to delete files...
    If your Error 80070057 is different than the ones displayed, perform a new Search.

    Why is this happening:
    QuickBooks cannot read the company file because the QuickBooks file extension was changed or is the wrong type (.qbm, .qbb, .qbx).
    This error can also occur during conversion or creation of a backup or portable company file if QuickBooks detects data damage in the company file.
    This error may possibly occur if the QuickBooks installation is damaged.
    This error can also be caused by attempting to open the portable company file (.qbm) without having QuickBooks open.

    How to fix the problem:
    Verify that the file extension displays company name.qbw and not a shortcut.
    Copy the company file, change the extension to .qbm, .qbb, or .qbx, and follow the appropriate steps to open a portable file, backup, or accountant's review.
    If the error occurs during the conversion or creation of a backup or portable company file, run the Verify utility to check the file for data damage. If it finds damage, run the Rebuild utility.
    Repair the QuickBooks installation.
    Uninstall, and then reinstall QuickBooks.

    Sep 25, 2009 | Microsoft Windows XP Home Edition

    2 Answers

    Toshiba Recovery Disc Creator isn't working


    hello lazerr_man,

    Try to use another freeware burnprogram like burnatonce to create an
    other CD, just to check if the Combo-drive is writing properly.

    If you don't get any error messages like the ones from Toshiba program, then the problem is the toshiba software.

    If other burn programs find difficulties in accessing CDs or DVD-Rs
    then the drive itself giving you a hard time and might seek for replacement.

    You may find the toshiba exchange parts too expensive and the internal drive is still reading disks properly, then think about an external dvd-rw drive, but make sure to buy a highspeed USB one (or even firewire, if the laptop has the port), else it will run rather slowly.

    good luck

    Sep 07, 2009 | Computers & Internet

    1 Answer

    When i install cd it says error 6 on my clarion dxz465mp


    Clarion Audio error codes:

    Error Codes:

    Error 1 Battery inside CD Changer needs to be replaced.

    Error 2 CD error message. Mechanism has as eject problem or takes a long time to select CD.

    Error 3 CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.

    Error 4 Connection problem. Reconnect the data cable.

    Error 5 CD error message. Could not read correct data due to CD ROM.

    Error 6 CD error message. Could not read data from disc because it is upside-down.

    Error 8 Tape Drive system defective. Eating tape or something wrong with the drive system.

    Error 9 Weak RF. Try alternate frequency

    Even though it says error 6 is an upside down cd, it just means the disc cant be read. usualy means the laser is dirty, out of adjustment, or not working.

    Aug 19, 2009 | Clarion DXZ465MP CD Player

    1 Answer

    Disc Error


    If you don't mind paying out some money, data recovery experts can possibly retrieve the data. You may want to try doing it yourself though because at least you know you won't damage the actual disk. Who knows what will happen to it after it has left your possesion.

    Jun 24, 2007 | Hitachi DZ-MV550 DVD Camcorder

    Not finding what you are looking for?
    Video Cameras Logo

    Related Topics:

    27 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hitachi Video Cameras Experts

    Ekse

    Level 3 Expert

    13434 Answers

    Marvin
    Marvin

    Level 3 Expert

    85223 Answers

    Al Rush

    Level 2 Expert

    270 Answers

    Are you a Hitachi Video Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...