Question about Encore Computers & Internet

1 Answer

Could not create this file.Shall I try again?

''C:Program FilesPrintMaster 2.0 GoldComponentsClip ArtTravelEuropeRusty Fence.jpg
Could not create this file.Shall I try again?'' Keeps appearing when I try to install the program and I am unable to try again just cancel.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 10,406 Answers

Click Start
Click Run
Type CMD and press ENTER.
Enter CD \ and press ENTER.
Enter CD "program files" and press ENTER.
Do you get an error-message?
If not, that's good. If so, what's the error-message?
Enter CD "PrintMaster 2.0 Gold" and press ENTER.
Do you get an error-message?
If not, that's good. If so, what's the error-message?
Enter CD "Components" and press ENTER.
Do you get an error-message?
If not, that's good. If so, what's the error-message?
Enter CD "Clip Art" and press ENTER.
Do you get an error-message?
If not, that's good. If so, what's the error-message?
Enter CD "Travel" and press ENTER.
Do you get an error-message?
If not, that's good. If so, what's the error-message?
Enter CD "Europe" and press ENTER.
Do you get an error-message?
If not, that's good. If so, what's the error-message?
Enter ECHO Y > "Rusty Fence.jpg" and press ENTER.
Do you get an error-message?
If not, that's good. If so, what's the error-message?

Posted on Jan 05, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't open download files


Either:

1) the original files are corrupt
2) the original files are encrypted
3) the downloaded files are corrupt
4) the downloaded files require being unzipped and you have no "unzipper" installed such as 7 Zip.
5) the downloaded files, if already unzipped, have no program assigned to read their specific format

Just what operating system were the files originally created upon and what software was used to create them? IF you don't know, try the followsing:

Determine their file type (their extension, such as .pdf, .doc, .jpg, etc.. Google "how to open "fill in" files (the file type). Try installing a program that reads that extension. If you already have one, try opening the file with a double click and when it asks for which program to use to open it, then pick the one already installed that your research says will open it.

It seems unlikely all the files would be corrupt. It is more likely that you do not presently have a program that can open that file type. You may have to convert the file type into another type of file for which you have software that can open it. Generally, there is freeware available that can open most file types.

Mar 04, 2015 | Computers & Internet

Tip

How to have background wallpaper into your hard drive or folder?


Hi guyz,
U can have any background image on your hard drive or folder.67e0b34.jpg
for this u have to create a note pad file.

1. Open note pad
2. copy and paste following statements:

[.ShellClassInfo]
IconFile=%SystemRoot%system32SHELL32.dll
IconIndex=116
ConfirmFileOp=0
[ExtShellFolderViews]
{BE098140-A513-11D0-A3A4-00C04FD706EC}={BE098140-A513-11D0-A3A4-00C04FD706EC}
{8BEBB290-52D0-11d0-B7F4-00C04FD706EC}={8BEBB290-52D0-11d0-B7F4-00C04FD706EC}
[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
IconArea_Image-=
IconArea_Image=Folder Settings$.jpg

[{8BEBB290-52D0-11d0-B7F4-00C04FD706EC}]
MenuName=T&humbnails
ToolTipText=T&humbnails
HelpText=Displays items using thumbnail view.
Attributes=0x60000000

3. Save that file as destop.ini
4. Now save it into any drive
Eg. c:
create folder naming "folder settings" and paste some images

suppose u save
1.jpg
2.jpg

now open desktop.ini file
now edit the line

IconArea_Image-=
IconArea_Image=Folder Settings.jpg

nw save and enjoy.

Regards
Mohit Baluni
spymohit@gmail.com

on Oct 11, 2010 | Computers & Internet

Tip

How to hide files in a jpg photo


1) Take two files -
one which you want to hide and another will be the jpg image(of any size and dimension)to hide that file

If you want to hide multiple files in one jpeg image, just zip them into one file

2) To make the process easy, Copy the above two files to the C:

3) Now open the command prompt (Go to start, Click "RUN" and type "cmd").

4) get to the root by typing cd\ or you can give the path name where the files are located

5) Now type the following command:

copy /b imagename.jpg + filetohide.ext new_image.jpg

6) Now a new file new_image.jpg will be created

7) Double click on the file and it will open the image which you used to hide the secret file

8) To access the hidden file simply change the extension from jpg to orignal extension of the hidden file,

Example: I took an image filename "myphoto.jpg"
I wanted to hide some important word documents so I zipped all the word files and created a zip file "word.zip"
Then copied both "myphoto.jpg" and "word.zip" to c:
Opened the command prompt
Typed the command: copy /b myphoto.jpg + word.zip new_image.jpg
Now I have a new file "new_image.jpg" in C:
When I double click on the new file it shows me the image of "myphoto.jpg"

If I change the extension of new_image.jpg to new_image.zip I can extract the contents of the .zip file

ENJOY !



ENJOY !

on Dec 03, 2009 | Computers & Internet

1 Answer

Cannot see pc MOV or JPG files on flash drive in Canon SX230


Thanks very much for responding to my problem.
It seems Canon will not allow edited pictures or video to transfer from PC to their digital cameras for viewing.
steps to my problem:1. my canon SX230 created all the parts for my WMV video in MOV format originally.
2. created a movie (WMV format) in Windows Live Movie Maker. Works well and plays on my PC (windows 7).
3. after WMV completed - converted to HD MOV format in 2 different file convert programs and with 2 different HD MOV resolution settings on Both programs. WMV resolution is 1920x1080 (HD). ALL 4 MOV videos play well on my PC in 2 different programs.

Steps getting Canon to see video in playback mode.1. copy MOV video from PC to Flash drive in my card reader in same folder as my original JPG & MOV files, then inserted into camera - does not recognize file.
2. copy MOV file from PC to camera with USB cable. Windows error message. Wrong format - would not copy.
3. Formatted flash drive in camera. Took picture to create DCIM folder, JPG image, and CANONMSC folder with M0104.CTG file .Deleted CANONMSC folder. Copied my MOV video from PC to camera (USB cable). this time copy successful. However camera does nor recognize file.
5. tried again except deleted M0104.CTG file but not the CANONMSC folder. no luck.
It seems Canon will not recognize any file that has not originated in the camera AND has not been altered. Upon researching answers on the NET - many other users of Canon cameras have the same problem with no luck.

Apr 23, 2012 | Cameras

1 Answer

How to reprogram nokia 6151?


hi,
you can fix that by using this gadget , tools and flash files
1.mxkey dongle activated
2.ufs interface
3.ufc v2 cable
http://i768.photobucket.com/albums/xx323/raul_king123/SL389937.jpg
procedure...,

*open mx key
*select BB5
*put the ufc cable in 6151,like this..

http://i768.photobucket.com/albums/xx323/raul_king123/SL389931.jpg

*put the mu ,ppm ,cnt ..(the flash file must be higher than former version to prevent damage on phones software ,the old version shall appear when you scan or bus check the phone..)
*bus check the phone
*back up rpl first in mx key
*flash the phone and wait until it is done..

goodluck and thanks for trusting fixya..

Jun 20, 2010 | Nokia 6151 Cellular Phone

1 Answer

Photo explosion 4.0 project studio. When I create


I kind of doubt this is your problem, but try and save the file by using the "save by a different name option." Then click options and slide the file size to large. Make sure you have your color setting set to rbg, not cymk. The channel should be set to 8 bits, not 16. I am not sure where that selection would be made in 4.0, but jpgs are not compatible with 16 bit channel. If you can't find the setting, check the help file.

Two questions: 1 Can you open any pdf and jpg files in Photo explosion, and 2 can you open the files you have created in photo explosion in another program?

If you can't open any jpgs/pdfs with any program, the problem is probably with your operating system. If the problem is only with photo explosion created files, and they can't be opened in any other program, it may be the "plug in." That is the piece of software required to produce the file. A viewer is also required. If you can open the jpg in another program, that would indicate photo explosion. The plugins that are loaded into the program should be listed, possibly under tools. You can try to update/reload these.

You have not indicated your operating system. This is important to correctly answer more complicated issues. For instance, if you have Vista 32/64 bit, your software has to be compatible and set to the right version. Because Vista is prevalent, I looked to see if it is compatible. Unfortunately, Nova recommended buying an update for the 32 bit version and had no info on the 64 bit. Somewhere on the photo explosion box there should be a small label telling you what it is compatible with. I hope that if this was not helpful you will leave me more info and answers to the above by writing a comment. I can get back to you with more specific advice.

May 06, 2010 | Nova Development Photo Explosion Deluxe...

1 Answer

How to create a flashdrive baground


First of all put the iamge file ( eg. test.jpg) in the root of the Flash drive. Then create a text file there and rename it to desktop.ini to the root of the Flsh drive.. Make sure it's not a .txt file.

Then open the desktop.ini file in notepad and enter following content.

Code:

[ExtShellFolderViews]
{BE098140-A513-11D0-A3A4-00C04FD706EC}={BE098140-A513-11D0-A­3A4-00C04FD706EC}
[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
IconArea_Image=test.jpg



>>.try it. :)

Feb 11, 2010 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

I want to scan a picture on my HP officejet K60 and email to my account. I need to know how to set this up


Hi bee03101962,

When scanning to e-mail, the scanned image is placed in a newly created e-mail message as an attachment. Complete the message, adding addresses, subject, and text, and send it. Here's how you would do that.
  1. Start the e-mail program and connect to the Internet service. For some programs, doing this first avoids confusion about assigning the e-mail a date and time for delivery.
  2. Load the original in the scanner.
  3. In the HP Director , click Scan to E-Mail . The all-in-one product scans the document, and the scan appears in a new message window of the e-mail program. NOTE: When scanning to e-mail, the scan is saved as .jpg file, which generally results in a smaller file size. Regarding file size, if the .jpg file exceeds the ISP's maximum size, consider rescanning at a lower resolution. Microsoft Office 2000 programs may or may not be supported. For more information on supported programs, check the HP Web site: www.hp.com/go/all-in-one.
  4. Process the e-mail message normally.
The scanner software scans into several e-mail and fax programs. If the program is supported, its name may appear in the Send To list in the Scan window. Some e-mail programs appear in the list as Mail. Good Luck, Don't forget to leave a rating. Thanks Mark

Sep 16, 2009 | HP OfficeJet k60 All-In-One InkJet Printer

1 Answer

Nero Photosnap Viewer Suddenly stopped working.


Let's say you cannot open JPG pics. This is what you have to do. 1) In explorer (My Computer), click Tools > Folder Options. 2) In the dialog box, click 'File Types' tab. 3) Scroll down until you see the JPG extension. 4) Select it and click 'Change' button below. 5) Select a program you want to use to open JPG files. (Windows Picture and Fax Viewer is the default program: You can select it.) 6) Click OK button. 7) If you have trouble opening other graphic types (BMP, GIF, PNG etc.) look for those extensions and repeat steps 4 to 6. 8) Click 'OK' button to close Folder Options dialog.

Jul 21, 2009 | Computers & Internet

1 Answer

Need to transfer copied files to x301 after full restore


create a new folder in your hard-disk and first try to copy 1-2 files from the external hard-drive to the new folder (copy any data/work/images you have stored/created not any files of windows folder or root of c: drive)

if the above copy works then copy back all except the c: root and these folders - Windows folder, Document & settings, Program Files

May 30, 2009 | Lenovo ThinkPad X301 2776 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

784 people viewed this question

Ask a Question

Usually answered in minutes!

Top Encore Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Alun Cox

Level 3 Expert

2679 Answers

Barbat Nae
Barbat Nae

Level 3 Expert

509 Answers

Are you an Encore Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...