Question about NEC VT47 Multimedia Projector

1 Answer

How do I focus the NEC VT47 projector? I have tried to rotate the focus ring and it won't move

Posted by on

  • Anonymous May 11, 2010

    I have the very same problem; I lend it and on return the focus ring wasn't moving anymore;I opened it but I can't find an easy fix :-(

  • Anonymous May 11, 2010

    I managed with a flat screwdriver to unlock the focus ring; i forced the ring applying strentgh with the tip of the screwdriver with the projector closed. The ring now moves butI can get a blurred image or a very blurred one :-(((

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I eventually fixed it; just a mechanical problem;I had to use strength to make the ring move again; How do I focus the NEC VT47 projector?  I have - 5586904.jpg
The arrow shows the direction of my movement; I had to use both hands; be very careful but also be aware that I had to put a lot of strength to manage to unlock it; good luck!

Posted on Mar 06, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I adjust focus?


Turn the grey ring around the lens (where the light comes from) until the image is sharp.

Apr 11, 2016 | NEC VT595 Projector

1 Answer

It will not turn thus i can not focus...the zoom ring moves but not the focus ring.


VT 595 the focus knob won't turn appears frozen other then that it works well

Jun 17, 2010 | NEC VT595 LCD Projector

1 Answer

Audio Jack of NEC VT47 (using external speakers)


go to your menu find the volume settings. i think your volume is 0 or muted.

Oct 07, 2009 | NEC VT47 Multimedia Projector

1 Answer

When I hook up my HP to an NEC projector it blows up the icons and screen so it makes it hard to see on the projected pic.


Try adjusting the resolution on you computer. I believe this is a native xga projector (1024 x 768)

Sep 17, 2009 | NEC VT47 Multimedia Projector

1 Answer

Clean filter on NEC


Hi I was looking for the same information and come across your question. I have just found this but have not had a chance to look at it yet, however if I don't reply now I might not get a chance later:
http://www.aboutprojectors.com/pdf/nec-vt47-manual.pdf
I hope it helps you (and me!)
P

Sep 25, 2008 | NEC VT47 Multimedia Projector

1 Answer

NEC VT47 Cropped image on left side


Hi. You can press the auto adjust button on the projector and the image should return back into view. If not then try another resolution on your computer as it may not be compatible with the projector.

Aug 28, 2008 | NEC VT47 Multimedia Projector

3 Answers

NEC VT47 Lamp type VT70LP will not power up 2 red lights spear Lamp not working


When the lamp exceeds 2100hoursof service, the projector cannot turn on and the manu is not displayed. Do the following:
For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds.
For VT570/VT47 Press and hold the power and the exit buttons on the remote control simultaneously for a minimum of ten seconds. When the lamp time clock is reset to zero, the lamp indicator goes out. Hope this helps! :]

Feb 27, 2008 | NEC VT47 Multimedia Projector

1 Answer

NEC VT37


you auto focus or you can manually rotate the lens for focus

Feb 22, 2008 | NEC VT37 Multimedia Projector

1 Answer

NEC VT47 Blink Sequence but not comming up.


If it is a lamp error try this:
When the lamp exceeds 2100 hoursof service, the projector cannot turn on and the manu is not displayed. Do the following:
For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds.
For VT570/VT47 Press and hold the power and the exit buttons on the remote control simultaneously for a minimum of ten seconds. When the lamp time clock is reset to zero, the lamp indicator goes out. Hope this helps! :]

Feb 08, 2008 | NEC VT47 Multimedia Projector

Not finding what you are looking for?
NEC VT47 Multimedia Projector Logo

Related Topics:

1,333 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a NEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...