Question about KitchenAid KFP750 Food Processor

1 Answer

Attachment stuck on shaft of food processor

I have a kfp750 food processor and was making breaddough yesterday, when the blade attachment suddenly rose up from its normal position. I shut the processor off, removed the dough, but cannot get the blade attachment off the shaft. Do you have any suggestions as to how to get it off? Thank you
Jennie Minda

Posted by on

  • Anonymous Mar 12, 2014

    blade will not come off of the shaft?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Put the mixing bowl up as much as possible. spray some wd40 into the groove between the attachement and the motor shaft. Wait for several minutes, then with a hammer and a piece of wood, give the bowl a good wack. With a few goes, it will gradually come off. I will be putting some butter inside the attachement from now on to keep it lubricated

Posted on Mar 09, 2011

  • jdurst May 28, 2011

    you guys rock. It worked with a little force but it came off. it was all filled with dough and very gooey but it works fine now thanks.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KFP750 Food processor: motor seems to be frozen. Can it be repaired?


repairing these items are not cost effective
you can take it to an appliance repair shop but parts if available will be close to the cost of a new unit

Aug 24, 2016 | KitchenAid KFP750 Food Processor

1 Answer

I have the 14-Cup Cuisinart Elite Collection Food Processor. Up until recently it was working fine. Recently when using the shredder blade, when I insert food into the feeding tube the blade stops...


If the unit works OK with other attachments and the problem is only with the one cup; then the blade may be loose and spins on the shaft, the connection gear under the bottom is worn or binding up. Debris is stuck around the blade shaft or from heating up the metal parts expanded and bind when turning.

Mar 10, 2014 | Cuisinart Food Processors

1 Answer

The stem is stuck on kitchenaid kfpw760


The motor shaft sleeve and spindle will need to be replaced, once this jamming has happened it becomes ongoing if you do not replace those inexpensive parts. You need to wrap some webbing tightly around the spindle attach the other end to something very solid (like a fence post) and then accelerate the motor part rapidly away from the post. Hold onto the motor very firmly or it will land on the ground.The webbing tightens instantly when it runs out of slack and the spindle will come off. Then you need to remove the motor shaft sleeve in a similar manner, I drill a hole in the end and use a shackle and chain attached to the post for that one. I use the leg of my workshop bench, most folks will not have a solid heavy bench like mine. If that sounds too hard just take it to your local K/A service agent, they will have done it many times.

May 26, 2012 | KitchenAid KFP750 Food Processor

1 Answer

Can't remove the container from the motor housing


It will be the blade holding the bowl on. The blade has become locked onto the motor shaft, in the end you are going to need to replace both. Take it to a K/A service agent.

May 22, 2012 | KitchenAid KFP750 Food Processor

1 Answer

How to remove motor shaft sleeve from KitchenAid Food Processor?


I just did this. I used a screwdriver and some needle-nose pliers to wedge and separate the shaft from the base. Once you've separated it by about 1/2 inch, it will come off easily. I simply used a mallet to install the new one.

Mar 06, 2010 | KitchenAid KFP750 Food Processor

1 Answer

Kneading blade stuck


plz contact 022-23051554 /23095757

Feb 02, 2009 | KitchenAid KFP750 Food Processor

Not finding what you are looking for?
KitchenAid KFP750 Food Processor Logo

1,110 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts

ismash55

Level 2 Expert

138 Answers

john h

Level 3 Expert

22486 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...