Question about Frigidaire ATF6000ES Front Load Washer
How do I put my Frigidaire affinity ATF6000fs washer on clean mode...I can not find my manual..Please Help
First, you put some bleach or tide washing machine cleaner inside. Then you make sure the washer is on and hold the spin speed button and the options button down at the same time for 10 seconds. You will see "Cln" appear on the display screen. Hit start and you are golden.
Posted on Jan 09, 2011
My manaul says to add 1/2 cup of bleach to the detergent compartment and then fill the bleach compartment to the max fill line and then do a normal cycle without clothes. it says to do this once a month. it also recommends leaving the detergent door pulled out when not in use, and leave the door open when not in use.... b/c as i'm sure you've smelled- it mildews super fast.... for really gross mildew problems it says you can use up to 3 cups of bleach.
Posted on Aug 20, 2012
You need to hold the buttons for at least 10 sec for Cln option to show on the display
Posted on Oct 11, 2012
With my Frigidaire Affinity I turned the knob to Hand Wash and held down the button for Clean Washer for 3 seconds and the option appears.
Posted on Jan 11, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Hello Tracy, thank you for your post!
From what you have described you need help putting your Frigidaire washer into a clean cycle. In order to further assist you I would need your model number. You can locate your serial tag (which lists your model number) on the door frame of your washer. With that information I would be happy to further assist you. -Matt
Jan 03, 2016 | Frigidaire Washing Machines
Hello Larry Occhipinti, thank you for your post!
If you are pushing the necessary buttons on your Frigidaire washer to perform a system clean and they are not working, it could be a possible issue within the control panel. I would recommend a reset on your appliance which can be done by disconnecting power from your appliance for roughly ten minutes. If that does not correct the issue, you can run a hot water wash cycle with a cup of bleach inside the tub to clean your appliance out as well. I hope this is helpful. -Matt
Aug 31, 2014 | Frigidaire Affinity ATF7000E Front Load...
Hey friend, I appreciate your for the post!
I understand you are trying to disassemble your Frigidaire washer, ATF6000FS. I have researched your error code "E90" and that seems to be an issue with your main control board or user interface board. These intricate parts do require precision and patience, therefore when replacing the exchange of electrical components or removing them from your appliance, I always suggest seeking professional assistance. One must be very careful as these replacements can lead to potential harm. -Chris
Aug 07, 2014 | Frigidaire ATF6000FS Affinity 3.5 Cu. Ft....
Jul 19, 2014 | Frigidaire Fafs4474lw Affinity 3.81 Cu Ft...
Jun 10, 2014 | Washing Machines
Oct 30, 2017 | Frigidaire Affinity ATF7000E Front Load...
Jul 30, 2012 | Frigidaire Affinity FAFW3577K Washer
21,156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: