Question about Hitachi 61SDX01B 61" Rear Projection Television

3 Answers

Picture just went black. menu, inputs - nothing

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

The standby light is not blinking. Sound is good and I can still blindly scroll through the input selection. The picture faded to black, it took about 4 minutes fade completely. I took the back of the tv off and none of the three bulbs come on at all, although I still get sound. Any ideas?

Posted on Sep 20, 2011

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Maybe this will help. My set is approximately 8 years old and has run without any problems during that time. Then one day I noticed that the picture was extremely dark. You could just barely make out the image. Also the picture was very slow to come up on the screen. It turns out the problem was an open RP41 resistor in the power supply heater circuit. This resistor is a 1.5 ohm 2 watt resistor. A little hard to find, but if you find it it will cost about 50 cents. Resistor was replaced and picture now comes up in 10 to 15 seconds as normal and brighness is back to normal. The resistor can be purchased from NTE Electronics at www.nteinc.com. Their part number is 2W1D5.

Posted on Apr 24, 2010

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,476 Answers

Is the standby light blinking? If so how many times? It could help narrow down where the problem is. At this point it could be anywhere. Most likely in the high voltage section. Get me more info and I will try to help.

hardrocko

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audio but no picture mitsubishi wt-46807


Did you try the OPTION menu---think I offered that to you a few days ago......

Mar 27, 2012 | Mitsubishi WT-46807 46" Rear Projection...

2 Answers

"32" rca tv about 3 years old was on & it went black- power light is on"


sounds like the sceen is dead, if you are receiving nothing on screen, then it sounds like either a component and/or screen is gone... however, check the tv input to make sure it wasnt acidentally switched to an input channel with nothing selected... if that does not work, call local tv repair or mfg customer service tech. if under warranty, have repaired or replaced. without physically seeing tv, it is hard to diagnose issue outside of information given. could be simple board replacement or could be screen.. but check input first, if a dvd player plays, then it could be just component or input on wrong selection

Oct 17, 2010 | RCA 32V550T 32" TV

1 Answer

Rca big sreen went black and white menue is still in color


Try using one of the other video input options, like AV inputs. If still have black and white picture, then the color processor is having issues. If now in color, then your tuner has issues detecting the chroma / luminance signal.

If you are using an external digital box, this may be the source of the problem as well. If you still have a VCR, connect the coax from VCR to the coax input on the TV, and play a tape. Tune the tv to channel 3 or 4. If in color, then your set top digital box is faulty.

Jun 25, 2010 | RCA Televison & Video

1 Answer

We have a Sharp Aquos TV with an annoying black box in the upper left hand corner of the screen. How do we get rid of it?


You may have PIP or picture in picture turned on and set to a input that has nothing connected to it. That's why the box is black. There should be a button on the remote for PIP. Try to turn it off. Or turnit off in the menu.

Jan 24, 2010 | Sharp Televison & Video

2 Answers

KDL-32M4000 sony tv screen went black suddenly,


We are having the same problem! Whats the solution!!!?!?!?!?!!!?

Oct 18, 2009 | Sony KV-36FS100 36" TV

1 Answer

No picture.


theres a problem in your power supply either input or output

Aug 16, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

No signal when connected via hdmi to dvi on tv


ya nothing shows up is all black no sound nothing

Oct 27, 2007 | Sony Playstation 3 (PS3) Console

1 Answer

NO PICTURE, MENUS... ONLY SOUND


same happend to my lns 4692....control board is gone and since it's attached to the screen...everithing is gone,my tv is under warranty,but Samsung did nothing in 3 (three!!) months,though they promised service,repair,replacement..u name it..!!I just finished a complaint letter to attorney's general office,NJ,consumer protection divisin,BBB,and others...let's see what happens...I WILL NEVER BUY SAMSUNG AGAIN, AND THOSE OF YOU WHO WILL, THINK ABOUT WHAT HAPPENED TO ME...SO THINK TWICE..OR THRICE...HA ,HA...SAMSUNG, IN ENGLISH IS...SOME SUCK!!!

Sep 19, 2007 | Samsung LN-S4692D 46 in. LCD HDTV

Not finding what you are looking for?
Hitachi 61SDX01B 61" Rear Projection Television Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...