Question about Whirlpool 30" Self-Cleaning Freestanding Electric Range - White-on-White

1 Answer

Whirlpool oven ''feature not available''

Whirlpool oven gets ''feature not available'' message when ever a bake, convect is pushed

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

That happened to my fairly new Whirlpool double oven. But I remembeedr the power in the neighborhood had flickered earlier in the day. So I went to the circuit breaker and shutoff power to the oven for about 30 seconds and turned back on. Everything normal now. I just assumed the slight flicker in the power affected to programming.

Posted on Nov 06, 2013

  • Shirlisa Banks
    Shirlisa Banks Jul 23, 2017

    Thank you!! It worked.

  • Les Williams
    Les Williams Sep 29, 2018

    I was able to reset the breaker and that fixed the problem!

×

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
jumptrout51

steve

  • 3361 Answers

SOURCE: oven won't heat after self cleaning

There is a overload thermostat located on the rear of your oven that needs to be replaced.
Self cleaning operations are not recommended by this technician.

Posted on Mar 02, 2009

Anonymous

  • 62 Answers

SOURCE: I inadvertently locked my oven.. How do I get it

here is a link that could probably help you its differrent model but the mecanism is the same.Kindly click the link below to find out:
http://applianceguru.com/forum1/611.html

If you find my answer helpful,please vote.Cheers and God Bless

Posted on Nov 10, 2009

barkencoa

Barry Coates

  • 3463 Answers

SOURCE: Whirlpool double oven has a loud fan when baking

There will be some noise from the fan, but it should not be excessive, if it is really loud, then this is an indication that the fan is failing, and should be replaced ASAP.

Posted on Mar 12, 2010

aborcass

Ron Coons

  • 2651 Answers

SOURCE: GE Profile -Installed wall oven - won't heat

brand new??? under a year old??? if so you have a warr call for service, but it sounds like an ignitor isssue, brand new , perhapsgot damaged in shipping 1-800-ge-cares

Posted on Mar 30, 2008

Anonymous

  • 116 Answers

SOURCE: Double oven / convection not working

It is likely that the convection element is burned out and needs to be replaced. If all other functions are working then this is the place to start. Teh back panel inside of the oven can be removed by removing the 4 visible philips screws on it. The element should look smooth and round, if not then it needs to be replaced. Be sure to turn power off to the oven before replacing it. Remove the screws that fasten the element to the back wall and gently pull the element away from the wall an inch or so. the wires will be exposed and can be unclipped from the element do not let them fall inside of the back of the oven or you will have to remove the oven from the wall to get at the back panel. Install the new element in the reverse procedure. If the element looks good then it will have to be tested with a multimeter to verify that it is still good before proceeding to check the selector switch for burn marks.

Posted on Mar 11, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my Whirlpool oven to work again?


You may have a damaged oven control panel. Contact your local utility and file a damage claim

Sep 07, 2018 | Whirlpool Ovens

1 Answer

My double oven by whirpool is displaying a message saying "feature not available" when I press the bake


First thing i would do is turn the circuit barker off to oven for one minuet and then turn it back on. feature not available is gone then press bake and start bake cycle. monitor the oven for 1 minute to ensure the error code does not display again. If it dose then you will need to get a repair service company to come check it out. they will have to enter the diagnostic mode and check for any other fault codes to make sure there is not something else causing the problem before the control board is replaced.

Jun 01, 2017 | Ovens

1 Answer

Model WOC54E whirlpool microwave/oven combo. recent power outage. microwave works fine. oven display says feature not available for baking when bake button pushed


Hello Carla Christian,

The problem with "power outages" isn't the
out part... it is the VOLTAGE VARIANTS...

Will cause a weak spot to fail... Poor sold joint
or
a transformer... but since you have PARTIAL
functionality you need to look to the specific
are of function that is DEFECTIVE...

I tried you part number but my
parts house wants more numbers...

Take a loo at what I found...

This site also has technical support... AND
VIDEO guides...

They can help you get your WHOLE model number.

http://www.appliancepartspros.com/whirlpool-wide-interface-board-wpw10412514-ap6021091.html

Carnac the Magnificent

May 31, 2017 | Whirlpool Ovens

1 Answer

Whirlpool model YGFE461LBQ1. When I press bake, or convection it says service not available


Hello. There is a thermal fuse located at the rear of the oven, underneath the rear cover. The part number for it is 3196548. If the bake element isn't working, this thermal fuse may have opened. Did you self-clean the oven recently? That is a notorious cause of popped thermal fuses due to lack of adequate ventilation. I hope this helps you!

Aug 26, 2015 | Whirlpool Ovens

1 Answer

I have a double whirlpool fan oven. The fan doesn't always work, seems to stick. What do I need to do to get it working? We've had it less than 3 years but I've never cleaned it. Is this why it doesn't...


Do you mean the fan inside the oven box in the back wall. This is the fan for the Convection bake etc. If so this is how it works..

a) Bake feature - that fan does not come on

b) Convection bake - that fan comes on during bake cycle

So that fan works for several features but not for all. It helps to circulate the hot air inside better for a more even, fast bake.

Do you mean the fan in the control board area. It is there to get the hot air trapped in the oven walls out. Not the heat inside the oven bake box area. This fan works differently depending the model and/or brand. Some models fan works from the time you start. Some models fan comes on only when that area reaches a certain high temperature.

Mar 01, 2015 | Whirlpool Ovens

1 Answer

When I select bake, broil, etc, I get the message-feature not available


If is 6 months old call for warranty repair, turn off circuit breaker for a minute then repower this may clear it if not again call for warranty service

Jan 30, 2014 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Whirlpool oven timed bake feature dosn't work.


F1-E1 - EEPROM Checksum Error - Disconnect power for at least 30 seconds and then reconnect.
Allow at least a minute after power has been restored and if error code reappears, replace control board (clock).


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
@@@@

Oct 25, 2009 | Whirlpool RBS275PD Electric Single Oven

1 Answer

My upper oven/ convection function on my dacor ecs230b will not heat


Bake and convection bake settings both use the bottom bake element to heat. It would be unusual for bake to work without conv. bake working. You also have pure convection which uses a different element surrounding the conv. fan on the back of the unit. If you press a feature and nothing happens it's the touch pad. If it comes on then turns back off it's probably the ERC (clock). If it comes on and wont heat only in pure conv. possibly an upper relay board or element problem.

Sep 22, 2009 | Dacor ECS230 Epicure Electric Double Oven

1 Answer

Dont know how to use


Many ranges now have automatic conversion when you use convection feature instead of standard bake, but as a general rule, if your standard baking time in the recipe is over 30 minutes, you can lower the convection setting by 25 degrees F and reduce the time by 25% to get the same results as standard baking settings. Please don't rate this if you don't feel it is a Fix-Ya for you, as other ratings lower my score. Thanks.

Jan 20, 2009 | Ovens

Not finding what you are looking for?
Whirlpool 30" Self-Cleaning Freestanding Electric Range - White-on-White Logo

20,027 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...