Question about Denon DRA-395 Receiver

4 Answers

Marantz SR6001 AV Surround Receiver - Blinking Standy Light

Unit just shut off - standby/power light starting blinking rapidly.

Unplugged unit to see if it would reset - to no avail. Standy/power light still blinking rapidly.

Any ideas?

Posted by on

  • 7 more comments 
  • Anonymous Apr 12, 2008

    Unit is in standby mode (standby light flashing).

    Pressing power button on front panel has no effect.

    pressing power buttons on remote has no effect

    cycling power has no effect (unit goes right back into standby as soon as power comes back on).

    unplugging/replugging power (unit goes right back into standby as soon as power comes back on)

    unit is plugged into Panamax PM 5300-PM line conditioner switched bank,
    so I don't thnink this could have been caused by power fluctuation.
    Very distressing.

  • Wenees May 04, 2008

    Yep. I have the same issue. System shuts down after a short period of time even after disconnecting the power cored for 3+ minutes. I notice the "protect5" appears on the dosplay before it switches off. Any recommendations?

  • Leonard9 Aug 05, 2008

    I have the same problem. Unplugging does not help, neither does pushing the multi speaker button and the power button the same time.

    Help please.

  • Anonymous Oct 30, 2008

    same problem 6003 just went to turn on zone 2 from start up

  • Anonymous Jan 29, 2009

    I have the same exact problem with a brand new marantz 8001. fast blinking light and cannot get it to turn on. really annoying. at least i have a sexy black box for my $1500...

  • jimwhite1 Feb 03, 2009

    Bought this unit in November 2008 from Kromer Radio in Toronto. In January 2009, the unit simply shut down and went into protection mode. Kromer has been of little help so far, simply suggesting I unplug it and starting up again in a few minutes. That worked the first time for a few minutes, now it can't be restarted. As this is a discontinued system, Kromer only offered to up sell me to the next unit or take this one back to the factory for a repair for a few weeks. I am concerned that a "fix" will not last. Has anyone tried this route yet?

  • djcarlos2001 Mar 09, 2009

    I have the same problem on an SR6001 which is about 10 months old. I've since sent it back under warranty so will wait to see the outcome. My unit went into this protect mode about two or three times a month after being on for about 20 minutes. A simple power off and on would clear the issue and the unit worked fine.

  • Anonymous Mar 14, 2014

    How can I reset the Marantz PM 7004 Amplifier when the standby light is blinking?

  • Anonymous Mar 31, 2014

    Marantz Receiver Sr6001 reset

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try pressing the power, and multi speaker button at the same time. But first turn the unit off...then press the above buttons at the same time...This is for the SR6001... GH

Posted on Apr 22, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 67 Answers

This unit went into protect either due to overcurrent or dc detect. There is no way to disable protection that Marantz or Authorized servicers are allowed to give out. The early versions of this model all you had to do was unplug for a few minutes then plug back in and unit if it did not have blown amp unit would powerup and work fine. But if amp had failure it may cause more parts to fail so they changed software to not allow users ability to disable protection. Send to Marantz Authorized servicer for them to check for amp failure or mayby they just have to disable Protect Mode.

Posted on Feb 16, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Denon Master
  • 924 Answers

Your receiver has DC Offset, meaning a damaged amplifier. If you are interested in having it repaired, please visit my website at audioserviceclinic.com. You may contact me there. Thank you.

Posted on Jun 26, 2015

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

My solution< looks like I won't be buying a Marantz any time soon!! Although wanting one of these power houses for a long time, I'm afraid to buy one now! This is why warrenties should be at least 5 years.

Posted on Jan 03, 2012

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

hlovegrove

  • 1 Answer

SOURCE: Marantz SR6001 AV Surround Receiver - Blinking Standy Light

I have exactly the same problem! Sometimes when I turn the input dial it comes back on but this time it is out for good. I have tried re-wiring and unplugging etc. nothing seems to work.

Posted on Jun 13, 2011

SOURCE: Marantz SR6001 AV Surround Receiver - Blinking Standy Light

I have a SR7001 with that problem. I found 2 shorted amp NPN & PNP transistors. Part #'s SAP17NY & SAP17PY.

Posted on Feb 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Marantz SR7400 AV Surround Receiver wont switch keeps converting to standby and reading check pow5


try a hard reset

leave the unit unplugged for one night and then switch it ON

Oct 07, 2008 | Marantz Televison & Video

2 Answers

My sr5004 marantz receiver has gone into standby with the indicator is blinking how do i get ride of it


If the red led is blinking fast (8x/second) the power supply is likely damaged and the unit will need to be serviced. If blinking slow, the most likely cause would be a shorted speaker connection. To help find the cause, unplug everything including the power and speakers. Connect only the power and try to turn the unit on. If the light doesn't blink, you know you have a shorted connection. Power off and connect the inputs and then power back on. If the light is not blinking, you know the problem is with an output connection. Just find the bad connection by process of elimination.

Manual: http://us.marantz.com/DocumentMaster/US/SR6004-5004_U_EN.pdf

Sep 27, 2014 | Marantz SR5004

1 Answer

Onkyo ht-rc180 standby light blinks will not start.i tryed factory reset, still blinks


The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and reconnect an input and a pair of speaker wires onto the unit. If the receiver still does not turn on than you will have to bring it in for service. Turn up the volume and if the receiver doesn't shut down, power off the receiver and add another pair of speakers. Power up the unit again and turn up the volume. If it doesn't shut down, power off the unit again. Now connect all your input sources and turn on your receiver. If the unit shuts down again, your unit will need to be further serviced at an authorized Onkyo service center.

Sep 24, 2014 | Onkyo Ht-Rc180 7.2-Channel A/V Surround...

1 Answer

What can i do to stop the red light blinking for marantz sr5007?


Turn off the power using X.
2 Press X ON/STANDBY while simultaneously pressing PRESET CH + and PRESET
CH -.
3 Once the display starts flashing at intervals of about 1 second, release the two
buttons

Aug 09, 2014 | Marantz SR5007 Home Theater AV Receiver

1 Answer

Marantz sr5600 reciever click and goes to blinking standby


I have the same problem. Earlier it got sorted out itself and now it has started coming up again.

Feb 26, 2012 | Marantz SR-5600 Receiver

1 Answer

Standby light is flashing rapidly and I cannot turn on


Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Marantz-SR7002-Receivers-manual/id/6753ci475/t/2/

Page 81...


PROTECTIVE FEATURE


In some cases, the STANDBY indicator may blink slowly, twice per second. In this case, turn off the unit, unplug the power cord, and check the following points.


Make sure the speaker cables are not reversed and connected to the wrong sides (+ and -) on the unit.


Make sure the speaker cables connected to the unit are not shorted. (Check both the unit end and the speaker end.)


Make sure the volume does not exceed the level that the unit is capable of producing.


When using the unit in a rack or other enclosed space, heat may build up inside the unit and cause a fire. When installing the unit, be sure to leave suffi cient space between the top, back and both sides of the unit and walls or other AV components to prevent the internal temperature from rising.


After checking these points, plug in the power cord and use the remote controller to turn on the unit. Turn down the volume before resuming playback. Confirm that there are no problems with the speaker connections and playback performance.


If this symptom recurs, request service at your nearest service center.


In rare instances, the unit may enter standby mode and the STANDBY indicator may blink rapidly, 8 times per second. In this case, unplug the power cord and request service at your nearest service center.

Feb 27, 2011 | Marantz SR7002 6.1 Channels Receiver

3 Answers

SR5004 amp on standby mode (red light blinking twice a second) / cant get it out of stand by mode


I am having the same issue as well. If you press "clear" "exit" and "surround mode" all at the same time, it will come back on. It seems to be an overheating issue. If you put a fan on it, it helps, but does not fix permanently. Anyone have any ideas for a permanent fix?

Sep 20, 2010 | Marantz SR5001

1 Answer

Unit will not run. cannot enter diagnostic mode.


i would say that you have a bad touch panel..99 percent positive

May 10, 2010 | Dishwashers

Not finding what you are looking for?
Denon DRA-395 Receiver Logo

6,820 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76173 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...