Question about Weiser Lock Locks & Locksmithing

2 Answers

I installed a weiser smartcode lockset and the motor is turning the wrong way. How do we fix this?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2 important things which may seem dumb but solved my problem:

- Make sure that once everything is in place, you hold the lock button before inserting battery pack (and keep holding the lock button) until you hear 2 beeps. The latch should come and go.

- Last but not least, make sure you put NEW batteries in... I had old batteries and when i tried it seemed like is was working but could not finish the door direction finding sequence stated above. Make sure they are new and it should work!

Posted on Dec 24, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 963 Answers

Here is a link to the Frequently asked question page for your lock:

http://www.weiserlock.com/Support/Faq/50160000000HhmZAAS.aspx

I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do?
First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 & 2, carefully remove it and move it over so that it mounts Prongs 2 & 3. A is right handed, B is left handed.

Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Posted on Mar 05, 2011

  • motti13
    motti13 Feb 17, 2013

    He's asking about the Weiser Smartcode, not the powerbolt. The Smartcode does not have a jumper, it relies on an automatic setup to determine direction.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Weiser lock powerbolt only goes half way and a green light flashes 5 or 6 times with a beep, how do i fix


Brent, Try resetting initialization/ installation or contact weiser. Attached you will find links to your manual. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.weiserlock.com/pdfs/instructions/electronics/smartcode.pdf
http://www.weiserlock.com/PDFs/instructions/Electronics/5062000-Powerbolt2-Instructions-eng.pdf
http://www.weiserlock.com/en/customerservice/productsupport/supportcontact.aspx

May 26, 2016 | Weiser Lock Locks & Locksmithing

1 Answer

How do I enter new code?


[PDF]Quick Reference Installation & Programming Manual

www.weiserlock.com/.../electronics/smart...

Translate this page Weiser Lock25605-02 Weiser SmartCode Manual. Program. Button .... Press and hold the "LOCK" button on the exterior keypad, while fully inserting the battery pack into .... anyone withaccess to the power board can change these codes, you must restrict access ...technical means, or evaded by entry elsewhere on the property. No lock.

Nov 26, 2015 | Weiser Lock Locks & Locksmithing

1 Answer

I have a weiser smartcode Part# 70-017780-002. I need to take out the original code and replace with new one. Can't seem to get old code out.


I have a weiser smartcode Part# 70-017780-002. I need to take out the original code and replace with new one. Can't seem to get old code out.

Sep 24, 2015 | Locks & Locksmithing

1 Answer

Schlge eltronic lever handset broken wire connector


First thing you will want to do is check the warranty for your lockset. If they will cover the lock under some part of the warranty then do that, if not. You could try getting a **** splice gauged for the wire and try splicing it together like that but there is no guarantee that it will work. Most electronic locksets have very sensitive wiring in them and even the smallest pinch on the wire can ruin the lockset. Try cutting out the parts that were broken off and splicing them together.

Feb 27, 2013 | Kwikset 909 909-15 Satin Nickel Smart...

1 Answer

Dead bolt trys to turn in the same direction


Hi.
I think it can be possible that the bolt assembly is installed upside down.
Remove the unit, and refit with the bolt and faceplate the other way up.
Test WITH THE DOOR OPEN. to ensure correct function.

I am not familiar with this lock - but other weiser locksets can suffer the same problem if a deadbolt is installed inverted.

Aug 28, 2009 | Weiser Lock Powerbolt 1000 Lock

1 Answer

Constant beeping


It sounds like the lock master reset might have been inadvertantly pushed when the coverplate was removed at some point. I would suggest you remove the batteries, reinstall them and reset the lockset and enter in new pass codes (you can use the same ones as before, if you wish).

I've attached the owner's manual, just in case you've misplaced yours, so you can reprogram the lockset and have the instructions for future use and reference.

http://www.smarthomeusa.com/Products/ED1460XXXX/manuals/WeiserLockPowerbolt1000-manual.pdf

Just so you know, Weiser and Kwikset were once the same company and offerred the same lock under both names, so don't worry about the manual having the Weiser brand name on it.

Hope you find this Very Helpful - Best regards!

Aug 18, 2009 | Kwikset 907 907-L03 Lifetime Polished...

1 Answer

A tenant installed one of these devices in my building, i would like to program my own code into it now


You will need to reset the lockset in order to program in your own lock code. Rather than just provide you with the steps to do that, I thought you might find it more useful to have the complete owner's manual for this lockset, so you can address any other questions or issues you might have with the lock in the future.

Such as having more than one code to allow for you to enter, while giving access to others using a different code, etc.

Here's the manual for the lock:

http://www.smarthomeusa.com/Products/ED1460XXXX/manuals/WeiserLockPowerbolt1000-manual.pdf

Hope you find this Very Helpful - Best regards!

Aug 17, 2009 | Weiser Lock POWERBOLT ELEC DEADBOLT

1 Answer

Plunger sticks in when installing weiser locksets


Try enlargeing striker hole with tiny dremel electric sand drum disc. Throw bolt is binding and you may also try looseing all install screws and tighen each one at a tme as you test plunger each tighten until you have success,do not forget to unloosen throw bolt screws to.

Mar 19, 2009 | Hardware & Accessories

Not finding what you are looking for?
Locks & Locksmithing Logo

Related Topics:

3,768 people viewed this question

Ask a Question

Usually answered in minutes!

Top Weiser Lock Locks & Locksmithing Experts

Azam Ali

Level 1 Expert

31 Answers

Scoee Scoffer

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a Weiser Lock Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...