Question about Prestige Electronics Vehicle Parts & Accessories

Open Question

My prestige 5bcr07 stopped responding to the remote after I was having some issues with the battery staying charged(it was draining the battery). The remote deosn't even show a signle from the brain. I tried to reprogram it but still can't get any thing to happen after the alarm chirps and responds to turning the key to on and pushing the valet button 3x. The battery and fuse to the alarm are in good shape.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 265 Answers

SOURCE: car alarm wont turn off

Try changing the batterys in the remotes mate

Posted on Feb 16, 2009

Ad

Anonymous

  • 5 Answers

SOURCE: Remote signal is not being

I had the same problem. I went to the dealer though because my blinkers were not working but the hazards were so I knew the lights were okay. It turns out there was an issue with some realy switch in the hazards. Once that was fixed then all of a sudden my remote signals came back to life. TRy that, good luck.

Posted on Feb 25, 2009

Anonymous

  • 152 Answers

SOURCE: I do not know where the button for the valet mode is.

First I would check with the installers at Circuit City as to where they would commonly install a valet switch on your model.

As for those that I have installed, their location was an area on the dash that would protect it from being accidentally bumped or hit by normal activity in the front cabin area, easily accessible from the drivers seat. So you may want to search your dash area for a little (most times BLACK) push button, it could be just under the dash or maybe in the glove box.

Good luck
Aduz


Posted on Mar 27, 2009

Anonymous

  • 41 Answers

SOURCE: I can not arm or disarm the alarm. I do have a red

turn key to on position, push valet 5 times then alarm will chirp then hit the lock button on remote

Posted on Feb 03, 2010

clkautosound

  • 11 Answers

SOURCE: how to put the prestige aps25ch 1200 foot range in valet mode

ALRMM SHOULDN'T GO OFF IN STORMY WEATHER UNLESS U GOT A LEAK SOMEWHERE OR YOUR SENSOR IS TO SENSITIVE

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Prestige APS787C wont start car


Try reprogramming the remotes: Turn ignition on, press and release programming/Valet button on antenna three times. You should here a short chirp, press the lock button on one remote. You should here a long chirp. Press the lock button on the other remote, you should here a long chirp. Turn ignition off. Test system.

Feb 11, 2013 | Prestige Remote Start

1 Answer

My car alarm key remote is not working. alarm not responding to remote. is remote broken


This might sound stupid, but have you tried first replacing battery in remote, this could cause this instantly, just like a TV remote. First try that. Hope that solves it right away.

May 15, 2011 | APS787 Prestige Remote Start and Security...

2 Answers

I have a honda pilot with the prestige car starter and the panic alarm keeps going off when I open the door. I can not get it to stop so it has to go through its 2 minute cycle. any ideas on how to get...


That is your factory alarm. I will assume that this Prestige unit is a remote starter with keyless entry...and you are using the Prestige unit to unlock the doors. Apparently, the unlock wire is connected but, the factory disarm is not. You can turn off your factory alarm by unlocking the vehicle with the key.

Jan 25, 2011 | Prestige Remote Start

3 Answers

I have a new prestige car remote installed recently and i have a problem how to shut off the alarm coz the installer did not or forgot to give me the manual. When i start the car remotely i press the...


You did not mention the year/make/model of your vehicle but, the issue appears to be the factory alarm. The installer failed to make the connection. If you intend to make the connection yourself I would need information pertaining to the vehicle. The (-) pulse before start wire for Prestige remote starters is black with a blue stripe. It is in a 4 pin connector at the module. This wire can be used to disarm the factory alarm before the remote start sequence.

Jan 23, 2011 | Prestige Remote Start

1 Answer

My keyless remote for toyota highlander wont work, how can i reprogram it?


To reprogram remote:
turn ignition on
press and release programming/valet switch three times ( you will hear one chirp from system)
press and release lock button on remote ( system responds with confrimation chirp)
press and release valet switch one time ( two chirps from system)
press and release unlock button on remote (system responds with confirmation chirp)
press and release valet switch one time (three chirps from system)
press and release option button on remote (system responds with confirmation chirp)
turn igntion off
test remote

Oct 05, 2010 | APS20B Prestige Keyless Remote Alarm

2 Answers

I have a Prestige Model APS-55TW remote start, when i hit the remote start the car sounds like it wants to start but not turning over? the car will start by turning the key what could be the issue?


try putting the key in the ignition and turn it to on (dont start) try using remote start button if it works you may need a anti theft module or spair ign. key.

Jan 15, 2010 | APS787 Prestige Remote Start and Security...

1 Answer

Prestige 2 way remote 5bcr07


That little "S" is the power save feature. Press the "F" and the lock buttons together to toggle the feature on and off. With the S on the battery in the transmitter will go into a power down mode when alarm is in disarmed state to save battery life.

Aug 02, 2009 | Gmc Dodge Ford Reverse Back-up Sensor...

1 Answer

Lock button is to unlock and unlock is to lock


The lock/unlock outputs from the main unit are reversed. There are two negative output wires from the unit that control the doorlocks, if you just switch them around, they will function correctly.

May 16, 2009 | Gmc Dodge Ford Reverse Back-up Sensor...

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Prestige Electronics Vehicle Parts & Accessories Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jason P
Jason P

Level 1 Expert

19 Answers

Derrick Schultz
Derrick Schultz

Level 3 Expert

10079 Answers

Are you a Prestige Electronics Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...