Question about Texas Instruments TI-84 Plus Calculator

1 Answer

I cant graph more than one equation at a time, it only allows me to graph one Y value at a time.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Texas Instru... Master
  • 8,081 Answers

A) Before drawing function Y1=f(X), R1=F(Theta), (X1=f(T0, Y1=f(T))
you should turn the statistical plots OFF.
To turn statistical plots off

  1. Press [2nd][Y=] to open the (STAT PLOT) menu.
  2. Select [4:PlotsOff] and
  3. Press [ENTER].
  4. Calculator displays Done
  5. Restart your graphs.
  6. Adjust the window dimensions if necessary or use the ZOOM function to have all graphs displayed.

B) If you cannot draw more than one function

Usually as soon as you start entering an expression in the Y= editor screen, the = sign is highlighted to ensure the drawing of a function. However, if you have previously used the Transfm application to draw dynamic graphs, it takes over the graphing functionalities from the native OS and you can only draw a single graph.
The reason is that dynamic graphing needs one or two parameters that can be changed during the graphing process and the graph redrawn with a new value of a parameter, and you end up with a family of curves differing one from the other by the values of one parameters. But since the calculator has space for 10 graphs at most, only one function can be highlighted.

To make a long story short, you must Uninstall the Transfrm application from memory. The procedure will not erase it, just kick it out of memory.

  1. Press the [Apps] key.
  2. Scroll down or up to reach the Transfmapplication.
  3. Select it and press [ENTER].
  4. If that application was running you will see a new screen that tells you some thing like
    • Transfrm App
    • 1:Uninstall
    • 2:Continue

    Press1:Uninstall.
    Graphing functionalities will revert to the native OS

Another potential culprit is the Inequalz App. You recognoze that Inequalz is runnibg if the [ Y=] editor screen shows tabs at the bottom
I cant graph more than one equation at a time. - 666ade0.jpg

To uninstall it, do as for the Transfm and select the option that will unload it from memory.
  1. Press [Apps]
  2. Select [ : Inequalz]
  3. Screen displays INEQUAL RUNNING
  • [1:Continue]
  • [2:Quit Inequal]
  • 3:About]
Press [2:Quit Inequal]

Posted on Feb 17, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to predict using linear model


If you have the equation of the line (of best fit), enter a value of x in the equation to get the value of y. Similarly, if you have a target value of y, enter it in the equation and solve for the value of x. That's about it.

Jun 06, 2014 | Casio FX-9750GII Graphing Calculator

1 Answer

Cannot graph two equations together, & trig graphs are not correct.


At first in Y editor type Y1=2*cosx and for example y2=[5*exp(-x)]-5 and then graphing it. Set RAD mode of course. See captured images
7_12_2012_1_48_49_pm.jpg

7_12_2012_1_49_29_pm.jpg

7_12_2012_1_49_51_pm.jpg

7_12_2012_1_50_13_pm.jpg

7_12_2012_1_55_03_pm.jpg

Jul 10, 2012 | Texas Instruments TI-84 Plus Silver...

2 Answers

I am trying to graph any possible equation and I get undefiend varialbe for any kind of equation as simple as x=7. It will always show as undefiend varialbe for any equation. I don't know why it does this.


Undefined variable error message displays when you evaluate a user-defined
function or run a user-defined program that references a local variable that is not
initialized (assigned a value). You have to type LineVert 7 and then graph function x=7. See captured image


3_11_2012_5_58_05_pm.jpg

May 02, 2011 | Texas Instruments TI-89 Calculator

1 Answer

I do not know how to graph using absolute values on my casio fx-9750GII. Is absolute value even possible on this calculator because i cant find it anywhere on the keys or in menus (unless im not looking in...


Hey it is. Okay, so start with a equation: say, y = -(1 |x|). Now type y = -(1 , then press the [OPTN] button, next to the shift. Next press the [NUM] button or F5. The first menu button should be Abs or absolute value. When your done it should look like this. y = -(1 Abs (x)) then graph it.

Aug 18, 2010 | Casio FX9750GII Graphic Calculator

1 Answer

When I type a linear equation into my TI 84-plus graphing calculator under the Y= sign and need to view multiple equations it will only show me one and won't allow me to select more than one at a time. The...


Usually as soon as you start entering an expression in the Y= editor screen, the = sign is highlighted to ensure the drawing of a function. However, if you have previously used the Transfm application to draw dynamic graphs, it takes over the graphing functionalities from the native OS and you can only draw a single graph.

You can skip the next paragraph if you want

The reason is that dynamic graphing needs one or two parameters that can be changed during the graphing process and the graph redrawn with a new value of a parameter, and you end up with a family of curves differing one from the other by the values of one parameters. But since the calculator has space for 10 graphs at most, only one function can be highlighted.

To make a long story short, you must uninstall the Transfrm application from memory. The procedure will not erase it, just kick it out of memory.

Press the [Apps] key. Scroll down or up to reach the Transfm application. Select it and press [ENTER]. If that application was running you will see a new screen that tells you
Transfrm App
  1. Uninstall
  2. Continue

Press1:Uninstall.
Graphing functionalities will revert to the native OS

Another potential culprit is the Inequalz App. To uninstall it, do as for the Transfm and select the option that will unload it from memory.

Jan 14, 2010 | Texas Instruments TI-84 Plus Calculator

2 Answers

How to graph an equation on a t1-83?


how to fix window to graph Pythagorean property

Sep 01, 2009 | Texas Instruments TI-83 Plus Calculator

1 Answer

The calculator is only graphing a half circle when it should be a full circle, specifically not in the negative y-values of the plane.


A circle is not a function and cannot be graphed in the regular y=screen. You can graph a circle in parametric mode.

To graph a circle in the regular y= screen, you have to graph it in 2 lines on the y= screen. I assume you've solved for y and gotten a square root equation. Remember a square root can be positive or negative. In line 1 of y= screen graph what you've been graphing and then graph the same equation in line 2 but with a negative in front of the equation. You'll get something that looks like an oval since the calculator screen is rectanglular. To make it look more circular (both parts aren't going to connect), press zoom and then select #5 (square).

Aug 01, 2009 | Texas Instruments TI-83 Plus Calculator

2 Answers

MATH Graph Style Icons


go to apps menu, go to transform app. click uninstall and go to y= screnn and should be a slash on the left and you should be able to graph more than one equation.

Aug 27, 2008 | Texas Instruments TI-84 Plus Calculator

2 Answers

Graphing


The first solution will allow you to watch your calculator graph two equations simultaneously rather than finishing one before graphing the next; it won't solve the problem of having the calculator unselect one equation when you select a second. To fix that problem, try the following:


In order to select additional graphs, the Transformation Graphing App will need to be uninstalled from the TI-83 Plus Family and TI-84 Plus Family. Uninstalling the App does not erase it from the calculator, it disables it from interfering with the normal graphing modes. Below are the steps to successfully uninstall the App.
  • Press [APPS] key
  • Select Transfrm from the menu
  • Press 1:Uninstall
The illustration and solution are courtesy of Jesse Phillips, who cites this page from the Texas Instruments support site

- doug garfinkel, Children's Day School

Jan 15, 2008 | Texas Instruments TI-84 Plus Silver...

Not finding what you are looking for?
Texas Instruments TI-84 Plus Calculator Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

Ekse

Level 3 Expert

13434 Answers

Gene Pitts

Level 2 Expert

159 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...