Question about Hobart A200 Stand Mixer

1 Answer

Hobart A200 mixer 1st speed doesn't work 2nd and 3rd work fine

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Could be that a gear is missing (broken) on the shaft that works the 1st gear. Check out the schematic at

http://www.food-equipment.com/parts_Hobart_mixers.htm

It could be the gear HM2-748

Posted on Mar 02, 2010

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: A200-T Hobart Mixer 1st speed have no torque

Check the spring pin that locks the motor shaft to the main drive gear in the gear box. You should be able to turn the motor from the back at the cooling fins and watch the shaft spin in the gear, that is if the pin is sheared. That is a common problem. if you plan on keeping this machine for a while, i recomend that you spend a little more on a quality spring pin,

mechanictony-
good luck.

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Locks up in 3rd gear after rebuild


Jeff your almost there....it must be the shifter into third....it must not slide fully into third....check for wear marks on the worm gear....and try running it without the protective cover on to see how it changes from 1st, into 2nd, then third...that mechanisim if not engaging totally in third.

Dec 03, 2013 | Hobart A200 Stand Mixer

2 Answers

Hobart A200 1st and 2nd gear have same speed after lever was removed and reinstalled.


I took mine apart completely and reassembled everything and greased everything and mine is doing the same thing. I'm thinking, also, that it is the tightening of the top lock nut.

Feb 04, 2013 | Hobart A200 20 QT Dough Bakery Pizza Mixer

1 Answer

My a-200 mixer works fine in 1st & 3rd very poorly or not at all in 2nd. Whats up and is there a easy fix.


Sounds like a key may be sheared on the transmission shaft.You will need to disassemble the transmission in order to repair.If your mechanically inclined i can step you through it.I'm a hobart tech and repair these mixers often.

Apr 09, 2009 | Hobart A200 Stand Mixer

1 Answer

Hobart A-200DT mixer lugs out


Can you be more specific?Does 1st gear run? are you overloading it?

Mar 18, 2009 | Hobart A200 Stand Mixer

2 Answers

A200-T Hobart Mixer 1st speed have no torque


Check the spring pin that locks the motor shaft to the main drive gear in the gear box. You should be able to turn the motor from the back at the cooling fins and watch the shaft spin in the gear, that is if the pin is sheared. That is a common problem. if you plan on keeping this machine for a while, i recomend that you spend a little more on a quality spring pin,

mechanictony-
good luck.

Jan 17, 2009 | Hobart A200 Stand Mixer

1 Answer

3rd gear spends at 1st gear speed with clicking noise


A key is most likley sheared on the center shaft.Take the gears off the center shaft.

Oct 15, 2008 | Hobart A200 Stand Mixer

1 Answer

A200t ist gear


This is a lousy diagram for your purpose ...

http://www.hobartlink.com/extranet/extranetmanualsandcatalogs.nsf/57866D624A678E7385256CB0007232DA/$File/F-19357%20(05-95).pdf

Page 14. The spring goes on the right with the hump against the roller.

Mike

Apr 27, 2008 | Hobart A200 Stand Mixer

1 Answer

A200 problem


Check the planetary.this is the bottom part of the mixer where you attach the hook.
You will see two nuts; make sure their tight as the planetary may have moved down.
Also have a look below:
http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem

Feb 04, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

Related Topics:

951 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...