Question about Mitsubishi WD62527 62 in. LCD HDTV
When I power it up, both the lamp light and the status light blink slowly. The lamp flashes green and the status flashes yellow. After about one minutes, only the status light flashes. According the the manual, a yellow status light blinking indicates an open fliter door. I've secured that several times. No where in the manual does it say anything about a slow blinking green lamp indicator, much less both the lamp and status indicators blinking at the same time (green and yellow). What can I do?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 08, 2015 | Mitsubishi WD-65731 65-Inch 1080p DLP HDTV
Jul 18, 2014 | Mitsubishi WD Televison & Video
The front panel Status LED provides an indication of
the set's operation and the possible cause of a malfunction.
If an abnormal condition is indicated, perform the
Self Diagnostics procedure.
To activate, press the front panel <ACTIVITY> &<CH
??> buttons at the same time and hold for 5 seconds.
The STATUS LED will then flash denoting a two digit
• The number of flashes indicates the value of the
MSD (tens digit) of the Error Code.
• The flashing then pauses for approximately 1/2
• The LED then flashes indicating the value of the
(ones digit) of the Error Code.
• The Error Code is repeated a total of 5 times.
Example: If the Error Code is "23", the LED
will flash two times, pause, and then flash three
Table 2-2: LED Indications
Error Codes, descriiptions and the most likely cause of
the error are listed in Table 2-3.
Note: The TV must be in "Shut Down." The LED
will probably be indicating an abnormal
condition. If the TV is switched Off, AC is
removed, or a System Reset is performed, the
code automatically resets to "12" No Error.
See the Error Code Log to retrieve a history of
Note: Use the front panel buttons, not the remote
Note: If there is no response, the front panel may be
locked by a V-Chip setting. To unlock, press
and hold <ACTIVITY> on the front panel for
LED Indication Condition
Off Off (standby)
Green Power On
Slow Blink Green Power Off with Timer Set
Fast Blink Green (80 seconds) > Off Power Off (Cooling fan still working, 80 sec)
LED Indication Condition
Red Lamp Failure
Yellow TV Too Hot
Slow Blink Red TV May Require Service
Slow Blink Yellow Lamp Door Open or No Lamp Installed
ABNORMAL INDICATIONS (For details perform Self Diagnostics Procedure.)
Jul 07, 2014 | Mitsubishi WD 65837 65 in. HDTV
May 26, 2014 | Mitsubishi WD-73827 73" HDTV DLP TV
Oct 25, 2012 | Mitsubishi WD-60737 TV
Apr 15, 2010 | NEC VT800 LCD Projector
Jan 19, 2010 | NEC VT676 Multimedia Projector
Jan 16, 2010 | Panasonic PT-50LC13 50" Rear Projection...
Dec 09, 2009 | Mitsubishi XL8U Multimedia Projector
Sep 04, 2008 | Mitsubishi WD-62525 62" Rear Projection...
1,692 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: