Question about Intel DG31PR Motherboard

1 Answer

No display in my dg31pr board what i have to do?

Posted by on

  • 1 more comment 
  • lutforrahman Apr 20, 2010

    i have lost vga and drive of my pc

  • Anonymous Apr 20, 2010

    BIOS dose not come at all. just power on the pc processor fan is running no display nothing. is it hardware problem?

  • Hans De Becker
    Hans De Becker May 11, 2010

    have you tried connecting a different display to be sure it's not the display instead of the graphics adapter? if you have tried this, can you enter the BIOS?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 212 Answers

It probably is.
if there are no hardware issues, at least you should be able to get into the BIOS setup. the annoying part in this case is the fact that without an image on the display, we cannot proceed with investigations. i can immediately tell which parts could be causing the problem: the mainboard, the graphics card (if not integrated on the mainboard or the processor. to pin-point the broken part, you should swap them one by one with a spare part of the exact same brand and model. but most people do not have these parts available just like that, i suppose this would be the same for you...

Posted on Apr 21, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Y intel dg31pr motherbord has no display after booting


It could be your video either the on board Video or the card you have installed. If you installed a Video card make sure it is fully seated and properly installed. If you are using the on board video make sure you have the jumpers set correctly and you have no bent pins on your cable to the monitor. Test the monitor on another computer to be sure the monitor is working.

Dec 02, 2011 | Intel DG31PR Motherboard

1 Answer

I have 9600 gt Graphics Card on Intel DG31PR with dual core processors & 2 GB Ram. While I starting My PC after 2-3 days then PC started but there will no display at all, hdd led not blink but pw led...


It's the motherboard, the BIOS forgets that there are components attached to the board and can't detect them.
Time for a new motherboard, this one is unfixable and it you wait too long it will fail while you use it with who know what consequences.

Oct 04, 2010 | Intel DG31PR Motherboard

1 Answer

Hi I am not able to use audio devices and display


which operating system r u using??
ok go to this below link. select your operating system and download drivers.

Copy and paste this below link in brower


http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+3+Series+Chipset+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+DG31PR

Jun 24, 2010 | Intel DG31PR Motherboard

1 Answer

DG31PR Motherboard: how can i instal audio driver dg31pr...


You should have got a driver CD with your board. If not, you can download the correct drivers for your board from this link:
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+3+Series+Chipset+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+DG31PR

(Copy and paste in your browser if you cannot click it)

May 17, 2010 | Intel DG31PR Motherboard

1 Answer

Intel dg31pr mother board why dont show display?


First check your num lock led if it on and off when you press num lock key then your cpu is ok.
Then therer is issue with monitor to cpu loose connection
or
Screen resolution problem.
For that when you power up press F8 key then enter in enable vga mode.then go to control panel and dispaly then settings then change screeen resolution to 1024*768 then apply and ok.
Aslo reconnect connection from monitor to cpu vga port.
Also check in bios some times your harddisk is not detected proeprly.
If problem still remains open cpu cabinet and reconnect data cable and power cable to harddisk.
Refix RAM memory.
Pull cmos cell for 15 minutes then check.
Thanks for using fixya.
Pls rate solution if it help you .

Jul 18, 2009 | Intel DG31PR Motherboard

1 Answer

Problem with installing win2003 on motherboard DG31pr


It mainly due to the lower version of driver trying to install at the time of installation of windows 2003.because older windows does not contain proper driver for latest Mother board chipset.

So install latest Windows 2003 or updated windows 2003 Operating system.

Jun 25, 2009 | Intel DG31PR Motherboard

1 Answer

Audio driver


Ignore those drivers and use the ones found on Windows Update. Start > Programs > Windows (or Microsoft) Update.

nLinked
Computer Support Services

Jun 07, 2009 | Intel DG31PR Motherboard

Not finding what you are looking for?
Intel DG31PR Motherboard Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Alun Cox

Level 3 Expert

2679 Answers

Ekse

Level 3 Expert

13434 Answers

Joe Negus
Joe Negus

Level 2 Expert

652 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...