Question about Kyocera Mita KM-1815 All-In-One Laser Printer
A C3200 is as follows:
Exposure Lamp Problem.
• In indicator check before starting copying, the average value in scanning of the shading plate with the CCD is 128 or more.
Defective scanner board (KP-5063).
Replace the scanner board (KP-5063) and check for correct operation
Defective exposure lamp or inverter board.
Replace the exposure lamp or inverter board.
Incorrect shading position.
Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position sensor.
Poor contact of the connector terminals.
Check the connection of connector YC7 on the scanner board (KP-5063), and the continuity across the connector terminals. Repair or replace if necessary.
These are direct from the Tech man.
More than likely it is the Exposure Lamp.
Hope this helps.
Posted on Aug 24, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Typicaly the scanner optics would need to be cleaned. Or it could be a scan lamp failure. A Kyocera dealer could help you with this.
Posted on Jun 09, 2010
Tips for a great answer:
Jul 24, 2016 | Kyocera Office Equipment & Supplies
Feb 17, 2015 | Kyocera FS-1118 Printer
Oct 25, 2013 | Kyocera Office Equipment & Supplies
Mar 17, 2012 | Kyocera FS-1118MFP Laser Printer
Mar 19, 2011 | Kyocera FS-1118MFP Laser Printer
Aug 11, 2010 | Kyocera Mita KM-1650 All-In-One Printer
May 27, 2010 | Kyocera Mita KM-1815 All-In-One Laser...
Feb 27, 2008 | Kyocera Mita KM-1815 All-In-One Laser...
2,939 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: