Question about Epson AcuLaser C1900 Printer

Open Question

Epson aculaser c1900 prints half the first page

Our epson aculaser c1900 starts printing the first page half way down the paper, it only does this once a day and always the first page fed through, even if this is a test page sent from the printer itself, so i know it is not a driver issue, Epson support told me it was a fuser problem so i have replaced that and problem persists, any ideas?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Inky

Inky Fingers

  • 705 Answers

SOURCE: Epson Aculaser C1900

The Cleaner Pressure Flapper Solenoid it dead or dying. You can try moving it by hand to see if you can prolong it, but basically it needs a new one. Its a job for an engineer really.

See the image below for it's location.

Posted on Oct 13, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: Epson AcuLaser C1900 starts printing too low

I have a C1900 with an error "Service Req E021". I appreciate any help as to what this refers to please.

Posted on Feb 21, 2008

Anonymous

  • 11 Answers

SOURCE: error code eq023 & worn fuser unit appears even after changing to new fuser

transfer belt cleaner error
replace the transfer belt unit

Posted on Sep 06, 2009

Anonymous

  • 11 Answers

SOURCE: EPSON AcuLaser C1900 with Error "Service Req E020"

ERROR CODE: E020
“SECONDARY TRANSFER VOLTAGE CONTACT/RELEASE PROBLEM”
Solution
�� Electric parts which can cause the trouble:
• Transfer Roller Pressure Solenoid (SL2)
• Transfer Roller Pressure Position Detection Sensor (PC7)
• Engine Board (PWB-A)

Posted on Sep 06, 2009

Anonymous

  • 1 Answer

SOURCE: What does error code EO23 mean on an Epson

this error refers to a misalignment of the carousel, i have one that randomly does it at the moment, i also have a replace black toner even though the toner is full, i'll get back to ya when i find a fix, the service manual says it can either be the 2nd motor, clutch or sensor, but in my case all three are working fine.

Posted on Oct 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

EPSON AcuLaser C1900 paper jam when printing black or color


I have just gained a C1900 second-hand and have set it all up and got the drivers and so forth. Am having exactly this problem, right down to the folded pages, wide top margin and 'Check Paper Size' error message. Did you ever find a solution to this? Anyone else know how to fix it?

Jun 06, 2009 | Epson AcuLaser C1900 Printer

2 Answers

Epson aculaser c9100 error code Eo86


After a repair person came and worked on the Epson Aculaser CX11NF, I have vertical line, full lenght across every printed page

Oct 08, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Epson C1900 "ghost " images


Sounds like the transfer roller or the fuser unit may be faulty. Look at the fuser to see if the roller surfaces are dirty. If so, replace the fuser.

Jul 20, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Service Req C0302


CPU Error. Mainboard is faulty.

Jul 04, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Acculaser C1900 Printing too low on paper


Which post. There are hundreds of thousands to choose from.

Jun 27, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Prints black perfectly/colour print blank


the photoconductor unit may need replacing ? have you given your printer a service ? clean out all the dust from your unit making sure you dont touch the conductor unit do the best you can and try it again ok making sure the wast collector is empty too thanks

Apr 16, 2008 | Epson AcuLaser C1900 Printer

1 Answer

K toner cart out, Epsom C1900 Aculaser color printer


i had the same problem as you i feel very upset with epson that they did not help you for me what i had to do is lay my printer on its side with the door to the toner facing you taking the toner out looking down into the bottom you will see a little plastic block wist it half way till it stops then reinsert the toner becarefull not to drop it in that shoud be fully fitted inside then put the unit back the right side up and start the printer up this shpuld fix your problem ok thanks

Feb 05, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Epson AcuLaser C1900 starts printing too low


I have a C1900 with an error "Service Req E021". I appreciate any help as to what this refers to please.

Jan 05, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Epson AcuLaser C1900 paper jams and almost no ink


If paper jam occurs frequently, wipe the pickup roller with a clean dampened cloth. Follow the steps below:
  1. Open Cover AB of the printer.
  2. Open the cover below the paper path roller.
  3. With a clean dampened cloth, wipe the pickup roller.
  4. Close Cover AB.
If the glass on the print head filter is dirty with toner, wipe it with a clean cloth. A vertical white line may appear in the printout. Follow the steps below:
  1. Open the front cover.
  2. Tilt the waste toner collector and pull it out.
  3. Grasp the handle of the print head filter with your fingers and gently pull it straight out of the slot. (**Note: Be careful not to spill toner that has accumulated on the print head filter. )
  4. With a clean cloth, wipe the glass surface of print head filter.
  5. Hold the print head filter by the handle and gently insert it all the way into the slot.
  6. Reinstall the waste toner collector.
  7. Close the front cover.
The print quality problem might be something as simple as turning off the Toner Save mode using the printer driver or the printer's control panel menus.
There may be a problem with the photoconductor unit. You may need to replace the photoconducter unit.
Or it might be something rather more serious (hopefully, not)Print out a status sheet. If a blank page is ejected, the problem may be with the printer. Turn off the printer and contact your dealer.

Jan 04, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Aculaser C1900


Sounds like you have a spot of toner on the laser lens. Pull out the waste toner bottle and toward the left of center you will see a little handle sticking out. This is the cleaner pads that wipes the lens. Pull it in and out a few times. Put the waste bottle back in and print a page or two. you should find your good as new again.

Sep 07, 2007 | Epson Aculaser C1100 Printer

Not finding what you are looking for?
Epson AcuLaser C1900 Printer Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2679 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...