Question about Waring WPM25 Popcorn Maker

2 Answers

Short Every time I plug it in, it trips my electric circuit. I must have gotten it too wet when I cleaned it. Will this dry out in time or do I need to replace the kettle?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,404 Answers

I found a short in the cord that goes to the kettle in the one I take care of ... Check it out.

Posted on May 17, 2010

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

You need to dry it as much as you can by hand, then take a hair dryer and see if you can dry it the rest of the way. You may need to open things up to expose the cirucitry and check for water.

Posted on May 17, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I put the top down as it clicks in it trips the mains lve tried different plugs in the house with the same result


YOUR CIRCUIT BREAKER MAY BE A RCD SET TO TRIP AT
250 M-AMPS VERY SENSITIVE
TO ME IT LOOKS LIKE YOU HAVE A ELECTRICAL COMPONENT OR CABLE SHORTING TO EARTH ,COULD BE SOME DAMP GOT IN SOME WHERE AND IS CAUSING A VERY SMALL ELECTRICAL LEAKAGE, HENCE TRIPPING THE CIRCUIT BREAKER. OR IT COULD BE A COMPONENT FAULT
PROBLEM COULD BE THE LID SWITCH ,GOT WET OR FAULTY, AND IT COULD BE COMPONENT AS PUMP OR MOTOR , AFTER YOU USUALLY CLOSE THE LID WHAT HAPPENS NEXT, DOES IT START FILLING WITH WATER/ COULD BE WATER SOLENOID VALVE FAULTY , WHAT I AM TRYING TO SAY IF YOU CAN REMEMBER WHAT HAPPENS AS SOON AS THE LID IS SHUT ,THAT'S WHAT MAYBE THE THING THAT IS SHORTING OUT, OR IF NOTHING HAPPENS WHEN YOU CLOSE LID NORMALLY UNTIL YOU SET UP CONTROLS
THEN THE PROBLEM COULD BE THE LID SWITCH OR WIRING TO IT FROM PROGRAMMER HOPE THIS IS SOME HELP. PS LEAVE IT OVER NIGHT TO DRY OUT IT MAY CLEAR IT'S SELF. GOOD LUCK

Nov 15, 2016 | Washing Machines

7 Answers

No menu-pic pulled up on bottom and down on top


Well, the usual repair is replacement of the STK IC chips in the convergence circuitry. You can find many references to the parts and procedures on this by doing a google search or looking through the allexperts.com archives.

Oct 21, 2008 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Rancilio silvia trips circuit breaker


There is an electrical short within the machine, ...don't doubt it - the results of your experiments prove that it has an electrical fault and that your tripping circuits are doing exactly what they should to keep you and your property safe.
The machine needs servicing by a registered Rancilio electrician, don't go inside yourself, its highly likely that the part causing the tripping is dangerous and will need to be replaced.

Apr 19, 2013 | Rancilio Silvia Espresso Machine

1 Answer

Hoover primera washing machine keeps tripping electrics when tured on.


Possible that there is higher current drain which trips off the circuit. This can be due to moisture or dampness in the circuit , coils or the motor. You need to remove the top panel and dry using a dryer. check the connectors, check the main line , the motor circuit. Isolation of the motor or the heater can confirm the short if the circuit stays. Check the main power to the panel and allied circuit for possible capacitor leak or short.

Mar 16, 2013 | Washing Machines

1 Answer

When I push power button household circuit breaker trips


It is cuesed by a short, If the unit got wet, try drying it out for a few days.(not in the sun) with winds, Open as much holes in the unit as you can if after the drying it is still doing it this short is caused by an electric wire thatch loose...
Fix it by finding the wire or by taking in to an electrician...
Hope it helps

Feb 16, 2012 | Philips Coffee Makers & Espresso Machines

1 Answer

My dryer keeps cutting my electic out what is wrong with it


First, make sure that the plug is firmly pushed in.Except for electrical parts short-circuiting, which is usually accompanied by an acrid smell, there is a possibility that there is a lint build up which, when moistened by the wet washing, which may also cause a short-circuit.
Although not common, a burned out heater may cause a 'short', in which case the dryer will not get hot.
All dryers should be equipped with an overload switch that 'trips' in case of an electrical overload.
BTW, make sure the filter is kept clean. A clogged filter can cause overheating problems.

Jul 24, 2011 | Dryers

1 Answer

Using my wet/dry vac - less than 5 hours on the thing - it just stopped - can't get it to switch back on. Tried different plugs - different days. Although I purchased over 2 years ago, it has hardly been...


It may have gotten hot if you went too long before cleaning the filter. It sounds like you may have burnt it up. I hope not! You might also check to see if you tripped a breaker on the electrical panel. Try plugging it in an outlet that is not on the same circuit. If it works in another outlet, then you have just tripped a breaker.

Good Luck!

Jim

Sep 30, 2010 | Genie Company GV150 Wet/Dry Vacuum

1 Answer

AC will not work after being cleaned


You are going to have to let it dry very well. That's about all you can do at this point, as something electrical has gotten wet, and its tripping the unit to keep from burning out a part. Its just a matter of wait. wait, and so on. It will start again.
Shastalaker7

Apr 17, 2010 | Samsung AW1203B Air Conditioner

1 Answer

The gfci on cord keeps tripping


GFCI's trip because theire is current leaking to ground. This often can be be caused simply by electrical components getting wet.

Or, it can be caused by a serious short to ground.

Fist, check to see if the inside circuits are getting wet from an internal leak. If so, fix leak, dry off components with a har dryer, try again.

If GFCI trips, it should be serviced by an experienced appliance repair person.

May 13, 2009 | Karcher K2.26 Electric Power Washer

Not finding what you are looking for?
Waring WPM25 Popcorn Maker Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Waring Kitchen Appliances - Others Experts

Jim

Level 2 Expert

158 Answers

Bruce Eichhorst

Level 2 Expert

74 Answers

Rick in LA

Level 1 Expert

3 Answers

Are you a Waring Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...