Question about Denon AVR-2802
I also have a problem with the Denon AVR-2802. Worked fine in 5 years. This spring some of the channels started to drop out, and I returned it for repair. The terminals was soldered by the repairshop and it seemed to work fine after this repair. Now no sound is produced from the speakers (both in playback with tuner, dvd, cd-player and in the channel level configuration). If I just turn the reciever on in very high volume (-05) i could hear a very weak output in the speakers, almost as if the amplifier doesent add any amplification to the signal. Odd that so many on the web has this excact problems with the AVR-2802 after 4-5 years. no sound look like muting is press
Had same issue with an older Denon receiver.
The problem: "Tape A" was activated.
Pressing the "Tape A" button to deactivate the function solved my issue :-)
Posted on Jul 05, 2015
Check back with that technician. have him check what he did. if you do see similar cases on the net. what was their solutions?
there may be some parts on the board that may need replacement.
with regards to sweet_rascal and bestdarngood post,
the problem lies not on the item itself but in the standard operation of the item which is already years. try to follow bestdarngoods post and see if it will work.
thanks for using fixya.
Posted on Apr 02, 2008
In general, you should try resetting the
microprocessor on any Denon receiver if/when you notice a problem
especially when it may seem rather odd. (no obvious defects, while not
Resetting procedure is similiar between the models; On units WithOut the Master On/OFF button; Unplug the power & while pressing both speaker A&B buttons simultaneously, plug in the main power cord. Youll notice the entire display would start flashing as long as A&B is held on---allow it to flash 3-5 times & release them. Unit is now reset to factory presets.
If resetting did not have an effect, then problem is more likely in volume control IC or it could even be the processor itself.
Let me know how this works out. Thanks and good luck
Posted on Apr 02, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 09, 2018 | Denon AVR-2802
Jun 03, 2011 | Denon AVR-2802
Register and download the manual for free at retrevo.com
Is it silent for ALL inputs including the Test Tones?
Function incorrect, Muting, Tape or EXT Input on when it shouldn
Feb 19, 2011 | Denon AVR-2802
Apr 13, 2010 | Denon AVR-2802
Nov 12, 2009 | Denon AVR-3300 Receiver
Apr 30, 2009 | Denon AVR-2802
Jan 02, 2009 | Denon AVR-2802
790 people viewed this question
Usually answered in minutes!