Question about Bose VCS-10 Center Speaker

Open Question

I would like to know if VCS-10 central speakers is enough for a small room audio

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's will be the power output of a power amp ideal for Bose 901 Series VI if the specs say it's compatible wt amplifiers/receivers rated from 10-450 watts RMS? Rated 250 IEC.


Depends on how loud you want to play it and how large your room is. If you have a large room and like to see how loud you can play it, go for a lot of watts. If you mostly listen to soft music, and have a small room, 10 or 20 watts is enough. There is no "optimum" for the speaker, only for you, your room, and your preferences.

Jun 08, 2015 | Bose 901 Series VI Direct/Reflecting...

1 Answer

Denon avr-1804/884, speakers Bose vcs center, Bose acoustimass 5 series 3 speaker system, Bose 201 series 4. All speakers play in test mode, with tuner, dvd, phono, cassette. The left side speakers will...


You don't say how "TV audio" is entering the system.

My guess is you're using analog audio Out from the TV into an analog input on the Denon. One channel failing would probably be the Left Channel cable failing or not seated.

I always recommend bypassing the TV audio entirely if the programming comes from somewhere other than its own antenna, as TV audio electronics add nothing good to the process.

If you're using cable box, sat box, game, whatever, ITS audio is best sent directly to your Denon's specialized audio hardware - digitally, if possible, to preserve multichannel possibilities.

You could also run standard analog audio from the cable box to the TV analog Audio IN if you just want to watch news and weather on TV speakers without the Denon involved.

Jan 11, 2011 | Denon AVR-1804 Receiver

1 Answer

I accidently pulled the wires from our bose VS-10 center speaker and now when I reconnect, it doesn't work. Why?


Since there are only the two conductors it's not rocket science to reconenct them. Did you short them together and damage the amp?

Dec 25, 2010 | Bose VCS-10 Center Speaker

1 Answer

I have a lifestyle system with surround sound at central location and two remote rooms connected through two additional amplifiers. The central location works perfectly well. Recently, I started getting...


Probably the connection in the main room to the wirless transmitter. The problem is definitely between the media centre and the wireless sender as it is not effecting the main zone and is effecting both second zones. Multi pin connections can bend very easily if pushing the connection further in does not solve it you may need to replace the pins. why not call Bose tech?

Feb 19, 2009 | Bose SoundDock Digital Music System for...

1 Answer

Home speakers


1st of all i would take a multimeter and test each wire to make sure you have a connection after this i would use any amplifier connecting 2 speakers at a time locating each one and then label the cables then from there buy a suited amplifier for your needs and away you go

Sep 11, 2008 | Wave Audio CS801 Speaker

1 Answer

Mounting under flat screen tv


There is no wall mount bracket for the VCS-10. It was not designed to be wall mounted. Your best solution is to mount a 22"x8" shelf to the wall 4-6" below the TV. Make sure it is mounted sturdy enough to support 10lbs.

Sep 05, 2008 | Bose VCS-10 Center Speaker

2 Answers

El driver de sonidop deboared msi no se deja instalar


vcs tem o drve de audio da pchip Nome da Placa Mãe PCChips P17G

May 18, 2008 | PC Chips PCChips P17G Motherboard - V1.0,...

1 Answer

BOSE 2 AND VCSX OVER DISTORTION


have a tech look at your set you have some bad caps in the audio circuit along with your audio out put transistor or ic.have it replace along with the bad caps.good luck my friend.

Jun 10, 2007 | Bose VCS-10 Center Speaker

1 Answer

How to use 7.1 HT for 2 rooms ?


Set it at 7.1 and just take the rear speakers in the other room with enough speaker wire 16G preferred and set your AUDIO out put to 7.1 all channel stereo only catch is that you won't be able to get a good sound in the second room in any other audio format good luck my friend

Nov 21, 2017 | Onkyo HT-S790S System

1 Answer

Have no sound on front and rear speakers...


looking at the front of the unit take the left side pannel and replace the fuses. ive had to do that with mine several times because of the same problem

Sep 10, 2006 | Sharp CD-C460 Shelf System

Not finding what you are looking for?
Bose VCS-10 Center Speaker Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...