Question about KDS Valiant 6380iPTD-01 Notebook
Lost manual. How do I re-pressure the boiler?
Two pipes coming into boiler on right hand side have brass block valves with a small round recess. These two valves are linked with a stainless fill hose.
Inside the recess on each valve is a small slot, there is a "key" with the boiler but prob lost with the manual. The advantage of the key is its sized so you wont be poking it in the wrong place!
Using a screwdriver turn both slots throug 90 degrees, you will hear water running through. Sometimes one valve is left open so try a combination until the watert runs.
Keep an eye on the pressure gauge and dont let it get too high, if you have no idea of setting pressure head for about 1bar.
Posted on Nov 23, 2008
On my boiler the pressure keeps coming down to 0 i keep doing it up to 1.5 and now i have found the faulit water inlet pipe that goes outside the wall has water comming out what does that mean
Posted on Dec 02, 2008
Pressure releif vavle is passing either remove and clean bore and rubber plunger or replace
OR the pressure in the boiler is increasing by plate heat exchanger leaking or filling loop passing water
OR boiler overheating and causing high pressues
Posted on Jan 06, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 01, 2016 | Computers & Internet
Jan 11, 2013 | Computers & Internet
Mar 06, 2011 | Heating & Cooling
Oct 27, 2009 | KDS Valiant 6380iPTD-01 Notebook
Nov 23, 2008 | Heating & Cooling
Nov 04, 2007 | KDS Valiant 6380iPTD-01 Notebook
3,637 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: