Question about Miele 24 in. G665 Built-in Dishwasher

1 Answer

The detergent flap does not open

I place the detergent in the dispenser and close the flap, start the dishwaher. but when washing is finished and i open the dishwasher, I find that the detergent flap is still closed and the detergent still inside

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 901 Answers

Check the dispenser for easy close & open. Trouble could be- latch relay not getting energized- wires might have snapped - relay driver - command not reaching from the controller etc.

If you check all the points you will get an idea. I feel micro-controller may not have any problem as other cycle is OK.

Further assistance contact the authorized service center.

Posted on May 22, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a whirlpool gu2400 dishwasher. The spring loaded soap dispenser door does not open during the wash cycle to release the soap.


Whirlpool dishwashers use a wax motor or a solinoid to release the door at a specific time during the cycle. So for proper cleaning the soap cup is nessesary . The part isn't that expensive and fairly simple repair.

Dec 30, 2014 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Soap dispenser doesn't open


How many cycles have you attempted? It may take a few cycles before the detergent pack becomes soft enough to run out and allow the latch to function properly.
Otherwise, if you can reply back with additional information such as model number, someone here on Fixya will be able to provide assistance.

Best regards,


helpful-rmh1nkwavuqlpyc44d3sgb0s-3-0_3.png

Feb 11, 2018 | GE Dishwashers

1 Answer

Dtergent dispencer does not open



Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.




Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.




Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.




Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.


Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.




Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.




Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.




Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.




Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.

Enter your model number to see parts for your dishwasher.


Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.




Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.

Enter your model number to see parts for your dishwasher.


Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.

Enter your model number to see parts for your dishwasher.


Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.

Enter your model number to see parts for your dishwasher.


Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.

Enter your model number to see parts for your dishwasher.


Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.

Enter your model number to see parts for your dishwasher.

Main Control Board


The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

God bless you . see the photo attached.401f2962-5d22-48f3-89be-c1db11d8eabe.jpg

May 23, 2013 | Hotpoint-Ariston FDD914 24 in. Built-in...

1 Answer

Troubleshooting


Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.





Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.





Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.





6717a822-d7e1-4c2e-a0bd-87fdb1bce189.jpg




Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.





Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.





Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.





Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.





Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.






Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.





Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.





Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.





Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.





Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.





Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.





Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

Gd bless you

May 23, 2013 | Hotpoint-Ariston FDD914 24 in. Built-in...

1 Answer

Why does a lot of detergent remain in the soap dispenser after a washing cycle is complete


Was the dispenser cup wet when you added detergent?
Make sure the dispenser cup is dry before adding powdered detergent. If dispenser cup is wet, the detergent can clump.
Is the cycle incomplete?
If the previous cycle did not complete, the detergent can become caked in the dispenser cup if it is left sitting in the dishwasher.
Is the detergent old?
Older detergent exposed to air will clump and not dissolve well, which will cause the dispenser door to stick to the detergent. Replace detergent if necessary and store the detergent in a tightly closed container in a cool dry place.
Is the water temperature too low?
For best washing and drying results, water should be 120oF (49o C) as it enters the dishwasher.
Were items blocking the dispenser that kept it from opening?
Items blocking the detergent dispenser will keep it from opening. Make sure water action can reach the dispenser.
Detergent guidelines
  • Use automatic dishwashing detergent only.
  • Other detergents can produce excessive suds that can overflow out of the dishwasher and reduce washing performance.
  • Store tightly closed detergent in a cool, dry place.
  • Fresh automatic dishwasher detergent results in better cleaning.
  • Add detergents just before starting the cycle.
  • The amount of detergent to use depends on the hardness of your water and the type of detergent.
  • If you use too little, dishes won't be clean.
  • If you use too much in soft water, glassware will etch.
  • Suggested fill amounts are for standard powdered detergent. Amounts may vary if you use liquid or concentrated powdered detergent. Follow instructions on the package when using these detergents.
  • Water hardness can change over a period of time. Find out your water's hardness by asking your local water department, water softener company, or county extension agent.

Nov 25, 2010 | LG Washing Machines

1 Answer

Dishwaher detergent dispenser is not opening


go to searspartsdirect.com and put the model # in they will ship the part to you.

Mar 02, 2010 | KitchenAid 24 in. KUDS25SH Built-in...

1 Answer

After a wash cycle my unit leaves a film on my glass'


first thing you need to do is purchase a bottle of dishwaser cleaner from your groc store in the diswasher detergent section red the instructions on the label add it to the cutlery tray in an empty dishwasher upside down remove the paper seal off the top of the lid do not remove the wax seal place the bottle upside down in your dishwasher turn on hot water tap and run till it is hot next turn on your washer set it to wasn and let it run a full cycle. when washer finishes open it up when it cools and fill rinse dispenser in door with a good quality rinse agent like jet dry close dispenser and when dishwaser is full of dirty dishes turn it on the jet dry will make your galsses come out crystal clear w no film and the dishwaher cleaner will help all your dishes come cleaner.Use the dishwasher cleaner aroun 4-6 wekks it cleans all the inside of the dishwasher and removes a lot of **** aND RESIDUE THAT ACCUMULATES IN DISHWASHERS OVER TIME

Dec 17, 2009 | Dishwashers

2 Answers

Soap dispenser flap not opening


Not a solution but exactly the same problem. I should have sent the machine back (I bought mine about 2008 too) but by now, 2010, the machine is a complete waste of time and money. The soap dispenser fails to open every time, wasting money, water and my patience because I then have to hand wash after all. will try the suggested oil trick, but it was obviously a bad design to start with.

Jul 20, 2008 | Bosch 22 in. SKT5102 Free-Standing...

3 Answers

Detergent dispenser


The opening of this dispenser is controlled by a wax motor for release. If you are unable to keep the latch shut you are probably looking at the spring and latch assy. This is not a hard job, but you have to open the inner door to get at the latch. Part numbers for the spring disp. flap is 912547. The latch (inside door) is 99001291. If you take your time and observe carefully the job will be easy. Catriver, post back.

Aug 08, 2006 | Magic Chef CDB6100 Built-in Dishwasher

Not finding what you are looking for?
Miele 24 in. G665 Built-in Dishwasher Logo

1,322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Dishwashers Experts

mpservices

Level 2 Expert

190 Answers

Mike

Level 3 Expert

4367 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Are you a Miele Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...