- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is too little information to be able to conclude with certainty what is wrong with the appliance.
I suggest that you first check if is there any alarm?
It is possible to read alarm during normal operation (if exist).
The family of alarms is displayed to the user by a repeating sequence during which the END OF CYCLE LED flashes.
You just count how many times the LED diode "END OF CYCLE" light up. That means family alarm code and than we will be able to give precise diagnosis.
We have later model and have same flashing drum symbol. You need to perform an ECO DRUM CLEAN cycle.
1. Press power to turn on machine.
2. Turn cycle selector to ECO DRUM CLEAN mode
3. Press Start/pause
If the START / PAUSE button lights up red, the washing machine detects a malfunction. Now you should count how many times the START / PAUSE button lights up red and tell to us what kind of malfunction is being done.
Try to rapid reading of alarm codes when the appliance is in normal operating mode (e.g. during the execution of the washing
Press and hold down START/PAUSE and the nearest option button for at least two seconds: the LEDs initially switch off, and then display the flashing sequence indicating the last alarm.
LED indicator START / PAUSE with red light = indicates the first digit of the alarm code (family)
• LED indicator START / PAUSE with green light = indicates the second digit of the alarm code (internal number of the family)
The red light tell you there is a fault. You have to read the fault code and it will give you a general idea of the problem - to do this you have to enter the service mode of operation - close the door and turn the dishwasher on. The Start/Stop light must be blinking. If the Start/Stop light is not blinking, press and hold the Start/Stop button for at least 3 seconds to exit the cycle. The Start/Stop light should now be blinking.
Press and hold the Start/Stop button while turning the dishwasher on. Release the Start/Stop button and immediately press it 2 more times. Flashing Intake/Drain and Salt lamps and a lit Rinse lamp indicates successful accessing of services mode Fault codes F00 Pots & Pans Lit F01 Sani Wash Lit F02 Normal Plus Lit F03 Normal Lit F04 Economy Lit F05 Rinse & Hold Lit F06 Pots & Pans Lit F07 Sani Wash Lit F08 Normal Plus Lit F09 Normal Lit Flashing
These mechanical timer machines have to follow a series of logical steps to complete the program - ie, empty. fill to level 1. wash. heat to temp. etc etc
My guess is the machine is not heating, as you say it works for part of the program - or possibly it is not emptying correctly? check water heating element and drain pump.
Program 4 eco is a separate program from 3, using low temperature washing - the machine does stop between 3 and 4 normally and doesnt carry on through.
That's a "Low Pressure" fault and it's possible you may only need to reset the mode. This question is posted under DD603 but a U3 code is usually associated with the 602 models. I am including an instruction for you on how to check the setting. Start with that first, it is easy to do. Let me know if you are not able to read the text.
Here are the eco related error codes for your washer.. 1)Light 3 (eco) flashes. Water is present in the flood catching tray at
the bottom which usually indicates that there is a leak somewhere. More
often than not this is just a pipe with a poor fitting and simply
tightening the clip is enough to stop the leak. Our machine had a very
slow leak from one pipe (not enough to trigger the alarm) which was
fixed in this way. The leak is detected by a small float switch located
in the flood catch tray.
Undo 4 screws on the metal plate under the dishwasher 3 at the front 1
at the back, this reveals The pump check the seals are in place on the
Wash indicator lights 3 + 5 (eco + pre) flashing rapidly. Filter is clogged. Pull out the filter and clean it. 3)Runs for approx. 3 minutes and then stops. Lights 3 + 4 (eco and fast)
flash. Probably caused by being plumbed into a hot rather than cold
water supply. The incoming water is hotter than required for the wash
which causes the machine to cut out. Plumbing the machine into a cold
water supply will fix the problem with no apparent long term problems.