Question about Craftsman 29cc 4Cycle Straight Shaft Weedwacker Gas Trimmer ()

1 Answer

What oil do you use in the four cycle motor/ 29cc

I need to know what oil to use in my Craftsman 29cc 4 cycle motor.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Generally speaking, if there is a place on a gas-powered device that is labeled "gas" & a separate location labeled "oil" than you will need to use a 4-cycle oil for that machine. If there is just a place to put gas, you would use a 2-cycle oil; however, you would need to read the directions/manual to find out the correct proportion of oil to use, because you will have to MIX the appropriate amount of oil with the correct amount of gas, making a oil/gas solution that you would use for that specific device.

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why when I pull the cord, the trimmer doesnot turn


Will not turn if it is clutch driven. When motor starts and revs are up it will turn provided the clutch is working correctly.

Aug 30, 2015 | Craftsman WeedWacker Gas Trimmer 29cc...

1 Answer

Pull cord broke, broke it down, can't get to it??


You will have to take the trimmer apart go to Parts tree Repair Clinic they will have a video

Jul 12, 2014 | Craftsman WeedWacker Gas Trimmer 29cc...

1 Answer

What oil weight is used in the TB 575


If it is a 2 cycle motor, then use an appropriate 2 cycle oil. I use a synthetic oil that 1 bottle is mixed with 1 gallon of fresh gas.

May 09, 2014 | Troy-Bilt 29cc 4-Cycle Straight-Shaft Gas...

1 Answer

Stay running


The carburetor needs to be adjusted very slightly, with a special tool. If still under warranty bring it to the Sears repair center quickly before you damage the engine.

Jul 07, 2013 | Craftsman 29cc 4Cycle Straight Shaft...

1 Answer

Craftsman 4 cycle weed wacker throwing oil


check the oil and see if its over full the carb might be leaking fuel into the crankcase

Aug 08, 2012 | Craftsman WeedWacker Gas Trimmer 29cc...

1 Answer

I have a craftsman blower /vacum 29cc 4 cycle 425 cfm ? would like to know if you use 2 cycle oil in the gas or is this a gas only unit , second question is there is an oil port on the back of the motor...


Hi lindseyhpaint...
DO NOT MIX OIL WITH GAS ON A FOUR CYCLE ENGINE use gasoline only, the oil will go into the oil port on the back of the motor with an oil level line (crankcase).
You will need a good grade of 10W30 to use in the crankcase.
Please take time to rate me

Aug 30, 2011 | Garden

2 Answers

My 29cc 4 cycle craftsman gas trimmer loses power when I increase the throttle


While Holding the Engine at Full Throttle, Adjust the High Air Mixture Screw In Until the Engine Revs Properly.

Jul 01, 2011 | Craftsman 29cc 4Cycle Straight Shaft...

Not finding what you are looking for?
Craftsman 29cc 4Cycle Straight Shaft Weedwacker Gas Trimmer () Logo

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

john h

Level 3 Expert

22486 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

rjivaro

Level 2 Expert

158 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...