Question about Sony Playstation 3 (PS3) Console

1 Answer

I have an 52 inch lg5000 tv . it supposed to be full hd. i ve tried to connect my play station 3 via hdmi cable but the only thing i get is the no signal sigh on the screen i ve tried everything . is my tv compatible with hdmi ? P.s : i ve bought a lot of hdmi cables , i tried all the instuctions i ve found in the internet , but still i have the same problem !!!!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Plug the ps in with power cable only no hdmi. When turning on Hold down the power button until you hear a second set of beeps you have now reset the video settings. Turn the console off and plug in your hdmi and switch back on it should now work.

Posted on Jun 11, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have had a 52" LG TV for about 17 months. I connect several devices (XBOX,CABLE,PC) through a receiver to the TV via HDMI. it worked fine all the time but now all of a sudden all I am getting is a no...


Did you change the HDMI cable? If so, you should check to ensure you have the cable installed so it is running the right direction. It may seem hard to believe but some HDMI cables only allow the signal to run in one direction.

Aug 05, 2014 | LG M5203CCBA 52-inch LCD Flat Panel...

Tip

PS3 Has no Video - Simple fix!


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

on May 13, 2010 | Video Game Consoles & Games

Tip

How to change or reset PS3 Video Display Mode


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

on Mar 12, 2010 | Video Game Consoles & Games

1 Answer

No audio input from TV on DVD Home Theatre


U have audio signal incompatibility. If the audio output is digital it may not work with an analog input, etc.

May 08, 2017 | Audio Players & Recorders

1 Answer

Connecting Ps3 with philips tv (full hd) when i got hd cable in, and click to switch so the ps3 uses hd to show things and i than switch over to the channel i plugin the hdmi cabel it gives blac kscreen


If it's the first time using your PS3, use the composite cables that came with it. Turn on the PS3 go to video settings and switch the input to HDMI. After you've switched to HDMI, turn the PS3 off and connect your HDMI cable, go back to video settings and change the resolution to 1080p. If this isn't the first time you've used HDMI for your PS3, make sure your T.V. is on the correct input. If the T.V. is on the correct input, try switching the HDMI cable to a different input. If that doesn't work try using a different HDMI cable, testing different HDMI connections if you're still getting the black screen. If none of those work then it's probably a problem with the PS3, but just to make sure try plugging something else with HDMI to see if that works. If another HDMI device works, then it's your PS3, if it doesn't then it could be a problem with your HDMI connections on the T.V.

May 04, 2011 | Philips 52 In. LCD HDTV

2 Answers

How do i connect my dell inspiron laptop to my 52 inch philips tv i have the hdmi cord put i cant figure out how to get the picture on the tv


theres a some way to connect on tv. HDMi cable if your laptop have supported of this. if you have not...you can use a usb media producer

Feb 20, 2011 | Computers & Internet

1 Answer

Ps3 broken


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

Nov 06, 2009 | Sony Playstation 3 (PS3) Console

3 Answers

Sony bravia lcd hd flat screen tv


You will need to connect the dvd via one of the inputs on the tv then select that input on the tv to see the dvd. Since dvd can connect to the tv several ways I suggest you read the owners manual as they show all the hookups to the tv. If your dvd has an hdmi input that's the best output to use from the dvd player.

Jan 13, 2008 | Televison & Video

Not finding what you are looking for?
Sony Playstation 3 (PS3) Console Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Ekse

Level 3 Expert

13434 Answers

shevantha perera

Level 2 Expert

125 Answers

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...