Question about Zenith C32V37 32" TV

2 Answers

Need remote control code for dish network along with how to instructions. I can't locate my manual for my Zenith

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Try this...1) turn on your tv set manually.2) on you dish remote..press and hold the "TV" mode button next to the "SAT" button.when all of the other mode buttons light up, let the "TV" button go...it should be flashing.3) Press the blank power button(The top red button in the top center of the remote).4) press the UP or DOWN button at the rate of about 1 per second until the tv turns off.4) When the tv turns off...press the # key on the bottom right of the remote...this stores the code and you should be ready to go...please try this first..It should work.If the scan doesn't work...The only code for Orion is "694".I hope this was helpful....

Posted on Dec 14, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 37 Answers

You can power scan for the code.
Turn ON the electronic device you want to program the remote to control.
Press the TV Mode button on the remote until the appropriate mode light is flashing.

Press the Power button. The mode light will stop flashing and stay lit.
Press the Up or Down arrow button to set the remote to the next code. The Down arrow button scans backward and the Up arrow button scans forward.
When the correct code is reached, the device (whether a TV, VCR, or other) will turn off.

Press the pound key button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times.
Turn the device back ON by pressing the Power button.
Press sat mode key once you power back on the tv to be able to operate the receiver box.
Try some other functions to make sure you have the correct code. Occasionally the Power button may work when others do not.
If the other buttons work you are finished.

.
If the other buttons do not work, repeat the previous steps. The scan will resume from the last code stored.
The mode light will flash rapidly when the scan has returned to the starting point and all codes have been tested for that mode. The remote control may not control some device models.

Posted on Jul 06, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zenith concierge tv code


The Dish remote only has about 60 possible codes built into it--try to Google the model number of that remote to locate (also can ask Dish) a manual with possible codes.

Not all remotes will program for all sets.

May 29, 2012 | Zenith Televison & Video

1 Answer

I need a code to operate a Vizio Blu-ray player, VBR231, with Dish Network remote control. Thanks! ctelschow@msn.com


HERE ARE A FEW SUGGESTIONS TO LOCATE A SUITABLE CODE FOR YOUR

VIZIO BLU-RAY PLAYER, MODEL VBR231

  1. HITATCHI CODES ~ VIZIO CODES
    WHICH MEANS YOU SHOULD TRY HITACHI BLU-RAY PLAYER CODE(S) LISTED IN THE DISH NET RC MANUAL.
  2. FROM DISHSUPPORT.COM FORUM:
    Scott Greczkowski

    DISHSUPPORT STAFF
    hances are the 5.3 remote will not control that Blu-ray player. What will work however is a DISH Network 21.0 remote which not only has a better IR code database, but also is an IR learning remote. This means if the code is not in the remotes database you can teach it to learn all the functions of your Vizio Remote.The DISH 21.0 remote will also work fine with your 622/722.If you can't find a 21.0 remote then please PM me and I can tell you where you can order one. They may also be available from DISH Network directly.
*Configuring your devices with a "UNIVERSAL" Remote can sometimes be a stressful and frustrating experience. But it doesn't hafta be!*

Here are a few general

GUIDELINES TO UNIVERSAL REMOTE CODE SUCCESS

  • READ THE ENTIRE INSTRUCTION MANUAL THAT IS INCLUDED WITH YOUR UNIVERSAL REMOTE (OR DOWNLOAD ONE FROM THE VENDOR'S WEBSITE)
  • USE THE REMOTES "AUTO CODE SEARCH" FEATURE TO FIND A MATCH TO YOUR DEVICE (IF A DEVICE HAS ONLY PARTIAL FUNCTIONALITY e.g. CHANNEL +/- WORKS, BUT VOLUME +/- DOES NOT= CODE IS NOT THE BEST MATCH FOR YOUR DEVICE)
  • PRACTICE PROGRAMMING (AN)OTHER DEVICE(S) IN YOUR HOME TO MASTER THE PROCESS OF PROGRAMMING CODES WITH THEIR MATCHING DEVICES USING YOUR UNIVERSAL REMOTE CONTROL. TRUST ME, IT BUILDS CONFIDENCE, ASSURES THAT THE RIGHT PROCEDURE IS BEING FOLLOWED IN ORDER TO PROGRAM THE REMOTE, AND PROMOTES EXPLORATION OF THE "UNIVERSAL" ASPECT OF THE CONTROLLER.

Apr 02, 2011 | DISH Network Televison & Video

1 Answer

CODIGO ZENITH


garciaj9629

I'm not sure what type of problems you are having with remote. I have provided a link with instructions on programming the remote to the TV. I have also provided a link with the codes for different TVs. Look down the list for your TV brand. Step 6 is for programming the remote to a TV. I hope this helps.

Remote instructions:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml
Ray Calo
DISH Network

Oct 08, 2010 | DISH Network IR Remote Control

1 Answer

Magnavox blue ray dvd. model nbmgf c need remote code for dish network


Hi there! In order to be able to provide the definite codes that will allow you to program your remote to your Magnavox Blue Ray DVD player, I would need the type of remote that you have- this can be found on the back of your remote, it would be displayed as something along the lines of 3.0, 4.0, 5.0, etc. To obtain a few codes that will likely allow you to successfully program the remote I used 5.0 because it is a common remote that is used with quite a few of our DISH Network receivers. The codes you can try for your DVD player would be, 829 (most successful) if not then please try the following, 685, 533, 554, or 556. After trying those codes if your attempts are still unsuccessful you can also check the manual that came with the DVD player from the manufacturer or just contact us here at DISH Network - although I do know sometimes the remote codes can be located in the manual. Hope the codes help & work for you!

-Kirstie DISH Network

Oct 05, 2010 | DISH Network IR Remote Control

2 Answers

Programming codes for dish network remote control 132577


The following link will take you to the website where the codes are located:


http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotes/8.0.shtml

Thanks for using Fix Ya.

Feb 02, 2010 | DISH Network IR Remote Control

1 Answer

Control code


leoidalgo

I have provided the remote codes for your Zenith TV. I have also provided a link with instructions on how to program the remote to the TV. I hope this helps.

Remote codes: 501, 652, 766, 500

Program remote, step 6:
http://www.dishnetwork.com/SupportSection/remote-setup
Ray Calo
DISH Network

Jan 06, 2010 | DISH Network 142923 Remote Control

1 Answer

Remote control code protech


avelinabiten

I have provided a link with instructions on how to perform a power scan to locate a code for your TV. Just click on the link and follow the directions. I hope this helps.

http://www.dishnetwork.com/SupportSection/power-scan-instructions
Ray Calo
DISH Network

Jun 28, 2009 | DISH Network IR Remote Control

1 Answer

Code for PROVIEW Television


There should be a list on the DISH network website.

Try this:
http://www.carltonbale.com/project/dish-network-universal-remote/

or

http://www.dishnetwork.com/content/faq/remotes/index.shtml

(this last one has links to remote control lists depending on the color of the buttons; around middle of page)

Jul 04, 2008 | Zenith B27A11Z 27" TV

6 Answers

Remote control code for magnavox dvd/vcr combo


I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Zenith C32V37 32" TV Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...